• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.361-366
• /
• 2018

Ice crushing occurs in many situations that involve a sliding frictional component such as sports involving ice-contact, ice interaction with ship hulls, and ice-on-ice sliding/crushing within glaciers and between interacting sea ice floes. Ice crushing-friction tests were conducted in the lab at $-10^{\circ}C$ using a set of acrylic ice-crushing platens that included a flat smooth surface and a variety of high-roughness surfaces with regular arrays of small prominences. The experiments were part of Phase II tests of the Blade Runners technology for reducing ice-induced vibration. Ice was crushed against the platens where the ice movement had both a vertical and a horizontal component. High-speed imaging through the platens was used to observe the ice contact zone as it evolved during the tests. Vertical crushing rates were in the range 10-30 mm/s and the horizontal sliding rates were in the range 4.14-30 mm/s. Three types of freshwater ice were used. Friction coefficients were extraordinarily low and were proportional to the ratio of the tangential sliding rate and the normal crushing rate. For the rough surfaces all of the friction coefficient variation was determined by the fluid dynamics of a slurry that flowed through channels that developed between leeward-facing facets of the prominences and the moving ice. The slurry originated from a highly-lubricating self-generating squeeze film of ice particles and melt located between the encroaching intact ice and the surfaces.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.96-102
• /
• 2018

For efficient operating strategy of electric power system, forecasting of daily peak electric load is an important but difficult problem. Therefore a daily peak electric load forecasting system using a neural network and fuzzy system is presented in this paper. First, original peak load data is interpolated in order to overcome the shortage of data for effective prediction. Next, the prediction of peak load using these interpolated data as input is performed in parallel by a neural network predictor and a fuzzy predictor. The neural network predictor shows better performance at drastic change of peak load, while the fuzzy predictor yields better prediction results in gradual changes. Finally, the superior one of two predictors is selected by the rules based on rough sets at every prediction time. To verify the effectiveness of the proposed method, the computer simulation is performed on peak load data in 2015 provided by KPX.

• Journal of Internet Computing and Services
• /
• v.8 no.3
• /
• pp.109-118
• /
• 2007

This paper proposed a method that can be simply analyzed instead of the basic general Fuzzy rule that its insufficient characters are cut out. Based on the proposed method. Rough sets are used to eliminate the incomplete attributes included in the rule and also for a classification more precise; the agreement of the membership function's output extracted the maximum attributes. Besides, the proposed method in the simulation shows that in order to verify the validity, compare the max-product result of fuzzy before and after reducing rule hosed on the rice taste data; then, we can see that both the max-product result of fuzzy before and after reducing rule are exactly the same; for a verification more objective, we compared the defuzzificated real number section.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.3
• /
• pp.232-241
• /
• 2000

This study suggests an integrated method based on concept hierarchies, information gain, and rough set theory for efficient discovery rules from a large amount of data, and implements an optimal rules discovery system. Our approach applies attribute-oriented concept ascension technique to extract generalized knowledge from a database, knowledge reduction technique to remove superfluous attributes and attribute values, and significance of attributes to induce optimal rules. The system first reduces the size of database by removing the duplicate tuples through the condition attributes which have no influences on the decision attributes, and finally induces simplified optimal rules by removing the superfluous attribute values by analyzing the dependency relationships among the attributes. And we induce some decision rules from actual data by using the system and test rules to new data, and evaluate that the rules are well suited to them.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2365-2372
• /
• 1999

The reusability measurement model should satisfy the following conditions : 1) can insert and delete metrics and components easily, 2) can compare and evaluate components quantitatively on the basis of validation, 3) don't require certain preassumed knowledge, and 4) can compute significance of each measurement attribute objectively. Therefore, in this paper, we propose a new reusability measurement model that can satisfy the above requirements. Our model selects the appropriate measurement attributes and calculates the relative significance of them by using rough set. Then, in order to measure the reusability of component, it integrates the significance of attributes and the measured value of them by using fuzzy integral. Finally, we apply our model to the reusability measurement of the function-oriented components and validate our model through statistical technique.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.507-514
• /
• 2007

This paper reports on the research which investigates acoustic signals acquired in turning with rough and finish simultaneously. The material is aluminum thin pipe. Two acousto-ultrasonic sensors were set on the finish and the rough bite of the CNC machine. It was first evaluated that one source was affected by the other. It was found that two signals were little affected each other, and that the acoustic signal from the finish bite was more related to the surface defects. Signals from the finish bite only were then analyzed in order to observe several types of surface defects. Second the fundamental experiments were accomplished to study the effects of machine vibration and material state. The signal characteristics due to surface defects were studied from the collected acoustic signals. The analysis was based on real time data, root mean squared average and frequency spectrum by fast fourier transform. As a result, the acoustic signals were made effects by machine condition, material structure. The acoustic signal from the finish bite was closely correlated with surface quality. Two types surface micro defects were then evaluated by the signal characteristics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.11a
• /
• pp.11-30
• /
• 1995

The ignition characteristics of a reactive solid with rough surface by constant heat flux were studied. The geometry of surface was represented by a set of identical protrusions having a shape of wedge based on the block of reactive solid. Several regimes of ignition were found, depending on the ratio of the protrusion length and the depth of the heated layer, formed in course of ignition process: 1) when the substance is ignited as the massive block, and the effect of roughness is not pronounced; 2) when ignited are the individual protrusions; and 3) in the intermediate region between the first two. Critical ignition conditions: ignition time and ignition criterion, are determined for the three regimes. The results are compared with the results for the one-dimensional ignition of the semi-infinite body. It is shown, that the effect of geometry on ignition results in the considerable reduction of ignition delay, and the amount of energy required for the successful ignition is less compared to the one- dimensional case.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.439-444
• /
• 2009

This study was to set the guidelines of soil chemical components in order to assure the safety and quality of the panax ginseng from physiological disorder. The disorder symptoms appeared on the leaf with yellow spot, atrophy, yellow-brown spot, also showed red skin and rough skin of the root. Occurrence type of physiological disorder in cultivated field divided into two types : type I 'such as, yellow spot' consist of single disorder symptom; type II 'such as, yellow spot and yellow-brown spot' consist of two or more different disorder symptoms. The individual contribution of soil properties to the occurrence type was as follows ; The yellow spot was affected by Na > $NO_3$-N > salinity (EC) in soil. The same results was observed in red skin. Atrophy was affected by $NO_3$-N > salinity (EC) > Ca > Mg. Rough skin was affected by $P_2O_5$>pH>Organic material > K. It showed positive associated to $P_2O_5$, pH and K, but negative associated to organic matter. Simultaneous occurrence of two different disorder, including cases which yellow spot and yellow-brown spot, those were affected by $NO_3$-N > salinity (EC) > Na > Mg. In the case of atrophy plus yellow-brown spot, those also were affected by in the order : $NO_3$-N > salinity (EC) > Ca > Mg > Na. Red-rough skin was affected in the order : salinity (EC) > $NO_3$-N > K > Na. Soil chemical components appear to be related to occurrence of physiological disorder, particularly in salinity (EC) and $NO_3$-N. The salinity (EC) and $NO_3$-N were negative related to plant growth. In addition, exchangeable cation capacity play critical roles in attributing to complex occurrence of physiological disorder.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.455-462
• /
• 2016

Recently, followed by rapid growth of robotics field, multi-linkage mechanism which can even pass by rough road is getting lots of attention. In this paper, I focused on Jansen mechanism. It's a kinematics object which is named after Dutch artist Theo jansen. Jansen mechanism embraces structure and mechanism which creates locomotion with the combination of the power and simple structure. Theo jansen suggests a 'Holy number'. It's an ideal ratio of leg components length. However, if there's desired gait locomotion, you have to adjust the ratio and the length. But even slight change of the length could cause a big change at the end-point. To solve this problem, I suggest a reverse engineering method to get a ratio of each links by nonlinear optimization with pre-set desired trajectory. First, we converted a movement of the joint of Jansen mechanism to vectors by kinematics analysis of multi-linkage structure. And we showed the trajectory at the end-point. After that, we set desired trajectory which we found most ideal. Then we got the length of the leg components which draws a trajectory as same as trajectory we set, using Multi-objective genetic algorithm toolbox in MATLAB. Result is verified by Edison designer and mSketch. And we analyzed if it could pass through the obstruction which is set dynamically.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.345-350
• /
• 1991

Rough rice samples of Chucheongbyeo, Bongkwangbyeo and Hwaseongbyeo were collected by the National Agricultural Products Inspection Office. Drying methods of rough rice were sun drying and forced ventilation drying by an oven dryer and temperature of the oven dryer was set to 43, 60, 70, or 8$0^{\circ}C$. Moisture content of samples was reduced from ca. 20% to 15% at the end of drying, and additionally to 12.5 % for the drying at 8$0^{\circ}C$. Characteristics related to rice grain quality, milling recovery, ratio of broken and cracked rices, percentage of germination, and sensory scores of the cooked rices were evaluated. Yielding percentage of brown rice and polished rice remarkably decreased by drying at 8$0^{\circ}C$. Percentages of cracked rice and broken rice were within the criterion of the second grade government brown rice (20%) only in the sun dried and the rices dried at 43$^{\circ}C$, on the basis of damaged rice, opaque kernel rice and colored rice. Broken rice percentage of the polished rice was within the criterion for the standard of government rice (5%) in the sun dried and the rices dried at 43$^{\circ}C$. Germination percentage of rough rice was higher than 80% in sun drying and drying at 43$^{\circ}C$, but remarkably decreased by drying rice at 6$0^{\circ}C$ and over. Sensory palatability of the cooked rice decreased with increase in drying temperature. The present governmental method of judging rough rice on the basis of moisture content and appearance of the rough rice appears to be improved to include the ratio of broken and cracked rices.