• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.269-274
• /
• 1999

This paper aims to DNC application of car fuel tank die working. DNC system is consist of CAD, CAM software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.393-398
• /
• 2001

This paper aims to work process of connecting rod die using CAD/CAM/CNC systems. CAD/CAM/CNC systems are consist of CAD(MDT4.0), CAM(Z-MASTER) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for data network.

• Tribology and Lubricants
• /
• 제26권6호
• /
• pp.329-335
• /
• 2010

Recently, the End-milling processing is needed the high-precise technique to get a good surface roughness and rapid time in manufacturing of precision machine parts and electronic parts. The optimum surface roughness has an effect on end-milling working condition such as, cutting direction, spindle speed, feed rate and depth of cut, and so on. It needs to form the correlation of working conditions and surface roughness. Therefore this study was carried out to presume of surface roughness on end-milling working condition of Al7075 by regression analysis. The results was shown that the coefficient of determination($R^2$) of regression equation had a fine reliability of 87.5% and nonlinear regression equation of surface rough was made by multiple regression analysis.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.39-43
• /
• 2001

본 논문에서는 자동차용 부품인 커넥팅 로드를 제작할 수 있는 금형제작시 생산성 향상을 위해서 CAD/CAM 시스템을 적용하였다. 사용된 CAD 소프트웨어는 MDT4.0. CAM 소프트웨어는 Z-MASTER이며 생성된 NC코드는 CNC 밀링머신에 전송되어 커렉팅 로드 금형을 자동가공 한다.

• 한국농촌생활과학회지
• /
• 제8권2호
• /
• pp.111-117
• /
• 1997

In this study we tried to give a decision on propriety of working conditions, to present ideas on reducing work loads. and to grope for efficiency of agricultural works. For this we examined the actual conditions of working environment, farmer's clothes, working posture, working methods, working time, resting state, fatigue recovery methods during cultivating lettuce in the winter greenhouse. And Ive improved harmful factors that affect farmer's health by considering results of previous study and farmer's subjective sensation. And we measured, compared, and analyzed the farmer's work loads before and after improvement. The results of this study are as follows ; 1. According to examine the actual conditions of cultivating lettuce in the winter greenhouse, farmers have experienced physical and mental chronic fatigue on the basis of the hot and humid crops-centered working environment, the rough ground condition, inconsistent arrangement of working stand and sorter, heavy-weared habits. and unsuitable working posture. 2. When we improved harmful factors that affect farmer's health, conformed the positive effects on important work efficiency index such as heart rate, electromyovolume, body temperature, and microclimate inside clothing and work loads were decreased by improving the hot and humid working environment, eliminating the hillock and obstacles of working path. deliver way, arranging the working stand and sorter consistantly, decreasing the clothing weight, improving the working postures and methods as using assistant appliances, alloting the working time and sequence effectively and presenting the light gymnastic exercises and rest for fatigue restoration.

• 한국광학회지
• /
• 제15권1호
• /
• pp.56-62
• /
• 2004

거친 표면의 형상을 측정하기 위해서 큰 등가파장 회절격자간섭계를 구성하였다. 제안된 시스템은 두 개의 투과회적격자를 사용해서 두 광을 측정물체에 각각 다른 각으로 경사지게 입사시켜서, 그 입사각에 따른 큰 등가파장의 간섭무늬를 얻는다. 이런 등가파장 간섭계는 기존의 광학 간섭계보다 넓은 영역에 걸쳐서 거친 표면을 빠른 시간에 측정할 수 있다. 제안된 시스템은 편광광속분할기와, 광속분할기, 프리즘을 사용해서, 불필요한 광을 제거하는 부분을 설계하여, 회절격자의 불필요한 회절광을 최소화하고, 회절격자의 형상으로 인한 시스템 오차를 줄였다. 뿐만 아니라, 큰 작동거리를 가지며 정렬이 쉽다. 측정정밀도를 향상시키기 위하여 위상편이법을 도입하였고, 등가파장보정법을 제안하였다. 실험을 통해서 측정시스템을 평가해보았다.

• International Journal of CAD/CAM
• /
• 제4권1호
• /
• pp.47-53
• /
• 2004

The subdivision surface is the limit of recursively refined polyhedral mesh. It is quite intuitive that the multi-resolution feature can be utilized to simplify generation of NC (Numerical Control) tool paths for rough machining. In this paper, a new method of parallel NC tool path generation for subdivision surfaces is presented. The basic idea of the method includes two steps: first, extending G-Buffer to a strip buffer (called S-Buffer) by dividing the working area into strips to generate NC tool paths for objects of large size; second, generating NC tool paths by parallel implementation of S-Buffer based on MPI (Message Passing Interface). Moreover, the recursion depth of the surface can be estimated for a user-specified error tolerance, so we substitute the polyhedral mesh for the limit surface during rough machining. Furthermore, we exploit the locality of S-Buffer and develop a dynamic division and load-balanced strategy to effectively parallelize S-Buffer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.963-966
• /
• 2000

Abrasive jet machining(AJM) process is similar to the sand blasting, and effectively removes hard and brittle materials. AJM has applied to rough working such as deburring and rough finishing. As the needs for machining of ceramics, semiconductor, electronic devices and LCD are increasing, micro AJM was developed, and became the inevitable technique to micromachining. This paper describes the performance of the micro AJM in micro groove cutting of glass. Diameter of hole and width of line in this groove cutting is 80${\mu}{\textrm}{m}$. Experimental results showed good performance in micro groove cutting in glass, but the size of machined groove was increased about 2~4${\mu}{\textrm}{m}$. therefore, this micro AJM could be effectively applied to the micro machining of semiconductor, electronic devices and LCD parts.

• 센서학회지
• /
• 제20권3호
• /
• pp.187-192
• /
• 2011

Abrasive blaster is similar to sand blaster, and effectively removes hard and brittle materials. Exiting abrasive blaster has applied to rough working such as deburring and rough finishing. As the need for machining of ceramics, semiconductor, electronic devices and LCD are increasing, micro abrasive blaster was developed, and became the inevitable technique to micromachining. This paper describes the performance of the micro blaster in MEMS process of glass and succeed in domestically producing complete micro blaster. Diameter of hole and width of line in this etching is 100 ${\mu}m$ ~ 1000 ${\mu}m$. Experimental results showed good performance in micro channel and hole in glass wafer. Therefore, this micro blaster could be effectively applied to the micro machining of semiconductor, micro PCR chip.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.178-183
• /
• 2001

Abrasive jet machining(AJM) process is similar to the sand blasting and effectively removes hard and brittle materials. AJM has applied to rough working such as debarring and rough finishing. As the need for machining of ceramics, semiconductor, electronic devices and LCD are increasing, micro AJM is developed, and has become the inevitable technique to micromachining. This paper describes the performance of the micro AJM in micro grooving of glass. Diameter of hole and width of line in grooving is 80${\mu}{\textrm}{m}$. Experimental results showed good performance in micro grooving of glass, but the size of machined groove increased about 2~4${\mu}{\textrm}{m}$. With the fine tuning of masking process and compensation of film wear. this micro AJM could be effectively applied to the micro machining of semiconductor, electronic devices and LCD.