• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.22-25
• /
• 2001

In this paper, a fuzzy advance angle control method is described to drive an industrial low voltage SRM (Switched Reluctance Motor) for 10kW forklift truck. SRM has a highly non-linear characteristic that is due to change the rotor and stator. And low voltage SRM is designed that its phase resistance and phase inductance is very low to inject high current into the phase windings. In this reason, the proper current control is necessary to drive the low voltage SRM efficiently. SRM has positive torque at increasing inductance region and negative torque at decreasing inductance region. Due to this reason, the current has to be built up in the increasing phase inductance part as soon as possible. Therefore, the phase switch must be turned on before the phase inductance increases, and this angle is called as the advance angle. Also, the phase current has to be dropped before the phase inductance decreases. Fuzzy logic is a flexible and general-purposed method of implementing non-linear functions and as such it is useful in control applications. Consequently, we designed a fuzzy advance angle controller to control the phase current appropriately.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.351-358
• /
• 2000

In a small centrifugal compressor system, a high-speed motor needs to be developed to drive impellers directly. Heat is generated by both electrical heating due to copper coil resistance and aerodynamic heating in the gap between the rotor and stator in a high-speed motor. Removal of the heat is essential to the design of such motors since most magnetic materials are brittle and can be easily fractured by the heat. In the present study the cooling flow fields and temperature distributions were analyzed by using computational fluid dynamics simulation for a high-speed motor which has air cooling system as well as water cooling system. In the analysis a conjugate heat transfer problem is solved by considering both convective heat transfer in the cooling system and conduction heat transfer in solid parts. Based on design drawings of a motor, air cooling system and water cooling system were analyzed to obtain temperature field and thus to check the coiling system performance. Also the cooling performance are studied for various flow rates of cooling air and water at the inlets.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.191-193
• /
• 2005

This paper presents Hybrid PI controller of IPMSM drive using fuzzy adaptive mechanism(FAM) control. To increase the robustness, fixed gam PI controller, Hybrid PI controller proposes a new method based self tuning PI controller. Hybrid PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.74-81
• /
• 2001

스위치드 릴럭턴스 모터(이하 SRM) 구동을 위한 센서리스 설계는 노이즈에 민감하기 때문에 이에 대한 강인성과 신뢰성이 있어야 한다. SRM 구동시에 이들 성분은 소선호 전자회로와 함께 대전류 전력회로와 근접되어 전기적으로 노이즈 환경을 만든다. 또한, 쇄교 인덕턴스와 유한 커플링 캐패시턴스에 의해 어떤 저전압 전류와 전압 측정회로에 노이즈를 일으킬 수 있다. 노이즈를 포함한 전류와 전압은 센서리스 알고리즘의 입력 값으로 사용되기 때문에 위치추정에 대한 오차를 발생한다. 본 논문에서는 입력 노이즈에 대한 높은 강인성과 저항성을 기술하며 퍼지 논리 기반 회전자 위치 추정 알고리 즘과 관측기 모델이 입력 데이터의 오차를 줄이기 위해 사용하였다.

• 융합신호처리학회논문지
• /
• 제5권3호
• /
• pp.210-215
• /
• 2004

교류 서보전동기 동적 모델은 비선형이고 2차 저항이 변동영향이 많다. 이러한 복잡한 제어는 견실제어가 요구된다. 이러한 시스템의 동특성은 슬라이딩 모드제어를 사용함으로 파라미터나 외란 변동에 대하여 견실성을 달성할 수 있다. 본 논문은 교류 서보전동기에 의한 위치제어에 슬라이딩 모드 제어의 적용을 나타내었다. 제어방법이 유도되고 제어시스템이 설계되었다. 교류 서보전동기의 견실제어를 위해 외부 부하 파라미터에 기초한 설계방법이 제안되었다. 제안된 제어방법은 가변구조 제어기와 슬립주파수형 벡터제어에 기초하여 주어졌다. 시뮬레이션 결과는 관성모우먼트, 점성마찰 및 부하외란 변동에 결실함을 나타내었고 슬라이딩 모드를 적용한 제안된 설계방법이 유용한 것을 구명한다.

• 한국분말재료학회지
• /
• 제31권3호
• /
• pp.255-262
• /
• 2024

Nano-oxide dispersion-strengthened (ODS) superalloys have attracted attention because of their outstanding mechanical reinforcement mechanism. Dispersed oxides increase the material's strength by preventing grain growth and recrystallization, as well as increasing creep resistance. In this research, atomic layer deposition (ALD) was applied to synthesize an ODS alloy. It is useful to coat conformal thin films even on complex matrix shapes, such as nanorods or powders. We coated an Nb-Si-based superalloy with TiO₂ thin film by using rotary-reactor type thermal ALD. TiO₂ was grown by controlling the deposition recipe, reactor temperature, N₂ flow rate, and rotor speed. We could confirm the formation of uniform TiO₂ film on the surface of the superalloy. This process was successfully applied to the synthesis of an ODS alloy, which could be a new field of ALD applications.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.52-60
• /
• 2016

Recently nickel based superalloys are extensively being regarded as the materials for the steam turbine parts for hyper super critical (HSC) power plants working at the temperature over $700^{\circ}C$, since the materials have excellent strength and corrosion resistance in high temperature. In this paper, alloy 617 of solution strengthened material and alloy 263 of ${\gamma}^{\prime}$-precipitation strengthened material were prepared as the testing materials for HSC plants each other. Post weld heat treatment (PWHT) was conducted with the gas tungsten arc (GTA) welded specimens. The microstructure of the base metals and weld metals were investigated with Electron Probe Micro-Analysis (EPMA) and Scanning Transmission Electron Microscope (STEM). The experimental results revealed that Ti-Mo carbides were formed in both of the base metals and segregation of Co and Mo in both of the weld metals before PWHT and PWHT leaded to precipitation of various carbides such as Mo carbides in the specimens. Furthermore, fine ${\gamma}^{\prime}$ particles, that were not precipitated in the specimens before PWHT, were observed in base metal as well as in the weld metal of alloy 263 after PWHT.

• 태양에너지
• /
• 제13권2_3호
• /
• pp.120-132
• /
• 1993

본 연구의 목적은 터어빈 회전차를 모델로한 복합회전형 히이트파이프의 전열특성을 실험과 유한요소의 해석법에 의하여 연구한 것이다. 입열량과 회전수에 따른 Nu, Re, Pr 그리고 무차원 응축액막두께가 변수로 사용되었다. 해석과 실험치는 거의 유사한 경향으로 일치하였으며, 연구결과는 복합히이트파이프 성능예측을 하는데 도움을 주었다. 복합회전형 히이트파이프에서의 열저항은 응축액막두께가 감소함에 따라 응축부의 열전달은 급격히 증가하였고, 응축액막두께는 복합회전형 히이트파이프의 전열 특성에 가장 큰 영향을 주었다. 주어진 Pr에서 Re가 변화함에 따라 무차원 응축액막두께가 일정한값으로 나타났고,무차원 응축액막두께는 회전수의 역수의 제곱근에 비례하였다. 본 연구의 해석적 방법에 의해서 Nu=A$({\delta}({\omega}/v)^{-1/2}Re^B)$라는 식을 구했고, 이때 A=0.963, B=0.5025의 값을 얻었다.

• Tribology and Lubricants
• /
• 제33권4호
• /
• pp.134-140
• /
• 2017

With the increase in adoption of tilting pad journal bearings (TPJBs), various failure mechanisms related to TPJBs have been reported, of which pad wear is a frequently reported one. Pad wear causes change in geometry of the bearing, which can sometimes result in the failure of the entire system. The objective of this research is to investigate the influence of pad wear on the pad temperature, which is one of the widely used condition monitoring methods for TPJBs. For the theoretical investigation, thermohydrodynamic (THD) analysis was conducted by solving the generalized Reynolds equation and the 3D energy equation. The results of the analysis show that the temperature of the loaded pad increases while that of the unloaded pad decreases, when there is wear on the loaded pads. In addition, the minimum film thickness decreases with an increase in the wear depth. A validation test was conducted with a test rig, which mimics the axial turbine when a test rotor is supported by two TPJBs. The test bearing consists of five pads with a diameter of 60 mm, and a resistance temperature detector (RTD) is installed in the pad for temperature monitoring. The test was performed by replacing the two loaded pads with the worn pad. The test result for the TPJB with wear depth of $30{\mu}m$ show that the temperatures of the loaded pads are $8^{\circ}C$ higher and that of the unloaded pad is $2.5^{\circ}C$ lower than that of the normal TPJB. In addition, the predicted pad temperature shows good agreement with the measured pad temperatures.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.125-130
• /
• 2007

단상유도전동기는 상용화된 전원을 변환장치 없이 직접 사용할 수 있어 가전제품의 전 분야의 동력원으로 사용되고 있다. 이와 같은 단상유도전동기를 해석하고 효율적으로 운용하기 위해서는 내부 등가회로 정수의 정확한 산출이 요구된다. 순단상유도전동기의 해석에는 교차자계설에 의한 방법과 회전자계설에 의한 방법이 있다는 것은 주지의 사실이지만 기존의 이론이나 방법에서 전동기 내부 정수를 산정하기 위한 방법은 다소 복잡하다. 최근 컴퓨터나 마이크로 프로세서의 발전에 따라 수치적 해석법과 등가회로법을 결합한 회로정수의 산정법이 제안되고 그 계산 처리 속도 또한 빠르며 정확해 지고 있다. 이에 정수 측정 전용 프로그램을 구현하여 단상유도전동기의 실험 결과를 산출하여 실시험을 이용하여 구하는 방법을 제시하고자 한다. 본 논문에서는 단상유도전동기에서 개별적으로 측정이 불가능한 1차 및 2차 누설리액턴스를 무부하시험, 구속시험, 그리고 고정자 권선의 저항 측정시험을 디지털 계측기를 이용하여 정확히 측정하고 측정한 디지털 계측값을 구현된 회로정수 계산프로그램으로 계산후 산출하는 방법을 제시하고 시행하였다.