• 한국주조공학회지
• /
• 제27권6호
• /
• pp.237-242
• /
• 2007

To improve the quality of the product and the cost efficiency, the joining of A356 alloy to an Al-18wt%Si alloys has been performed by centrifugal casting. The influence of the mold preheating temperature, the pouring temperature and the rotational velocity of the mold on the microstructures of the shell in the centrifugal casting was investigated using the experimental and simulation methods. In the present study, the cellular automaton (CA) technique and the finite volume method (FVM) were adopted to simulate the evolution of the macro structures and to calculate the temperature profiles, respectively. The evolution of the microstructures was also simulated using a modified cellular automaton (MCA) model. The optimal rotational speed of the mold for obtaining the sound shape of the shell was estimated experimentally to be over 1200 rpm. For the uniform microstructure, the outer shell needs to be cast with higher preheated mold temperature and lower pouring temperature, and the melt was poured at lower temperature in the inner shell. In order to obtain the sound shape of the joining, the different materials were poured simultaneously.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.142-150
• /
• 2005

Design and performance evaluation of a spindle system which was composed of a grinding spindle and a regulating spindle for the centerless grinding of ferrule were performed in this paper. Layout and details of spindle system were designed and hydrostatic bearings for spindles were also designed. Prototype of spindle system was developed and its availabilities to machine the ferrule were discussed using the experimental results on the spindle stiffness of each spindle, loop stiffness, rotational accuracy and thermal characteristics. Loop stiffness of the spindle system was $130\;N/{\mu}m$, which was enough to machine the ferrule. Rotational accuracies of each spindle were about $0.2{\mu}m$ at the primary speed of 2,300 rpm(grinding spindle) and 300 rpm(regulating spindle). Temperature rises at the same speed were about $4.4\~4.7^{\circ}C$ in the case of grinding spindle and $1.8^{\circ}C$ in the case of regulating spindle, which agreed well with the designed value. From these results, it was estimated that the prototype of spindle system had enough performances for the centerless grinding machine to machine the ferrule.

• Journal of Astronomy and Space Sciences
• /
• 제34권2호
• /
• pp.119-125
• /
• 2017

We retrieved rotational temperatures from emission lines of the OH airglow (8-3) band in the sky spectra of the Sloan digital sky survey (SDSS) for the period 2000-2014, as part of the astronomical observation project conducted at the Apache Point observatory ($32^{\circ}N$, $105^{\circ}W$). The SDSS temperatures show a typical seasonal variation of mesospheric temperature: low in summer and high in winter. We find that the temperatures respond to solar activity by as much as $1.2K{\pm}0.8K$ per 100 solar flux units, which is consistent with other studies in mid-latitude regions. After the seasonal variation and solar response were subtracted, the SDSS temperature is fairly constant over the 15 year period, unlike cooling trends suggested by some studies. This temperature analysis using SDSS spectra is a unique contribution to the global monitoring of climate change because the SDSS project was established for astronomical purposes and is independent from climate studies. The SDSS temperatures are also compared with mesospheric temperatures measured by the microwave limb sounder (MLS) instrument on board the Aura satellite and the differences are discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.49-52
• /
• 2008

터빈 블레이드의 엣지 형상 변화에 따른 표면 가스온도 발달과정에 대해서 전산해석을 수행하였다. Sharp형과 Round형의 터빈 블레이드를 모델링하였으며, 터빈의 회전수는 두 가지 형상 모두 0${\sim}$10,000 rpm의 회전 속도를 주어 전산해석을 실시하였다. 터빈의 회전수가 증가할수록 터빈 블레이드 표면의 평균 온도는 하강하였고, Sharp형 엣지 형상이 Round형 엣지 형상에 비해서 터빈 블레이드의 표면 온도 분포가 전반적으로 낮은 분포를 나타내었다.

• Steel and Composite Structures
• /
• 제8권2호
• /
• pp.159-178
• /
• 2008

An analytical procedure is presented for the determination of the buckling load and the buckling temperature of a straight, slender, geometrically perfect, axially loaded, translationally and rotationally restrained steel column exposed to fire. The exact kinematical equations of the column are considered, but the shear strain is neglected. The linearized stability theory is employed in the buckling analysis. Behaviour of steel at the elevated temperature is assumed in accordance with the European standard EC 3. Theoretical findings are applied in the parametric analysis of restrained columns. It is found that the buckling length factor decreases with temperature and depends both on the material model and stiffnesses of rotational and translational restraints. This is in disagreement with the buckling length for intermediate storeys of braced frames proposed by EC 3, where it is assumed to be temperature independent. The present analysis indicates that this is a reasonable approximation only for rather stiff rotational springs.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.208-209
• /
• 2000

라이다 방법을 이용한 대기의 온도 측정은 크게 1) DIAL 방법을 이용하는 방법 2) 공기분자의 밀도를 측정하는 진동 라만 산란을 이용하는 방법 3)공기분자의 회전 라만 산란을 이용하는 방법 4) Rayleigh 산란의 선폭을 이용하는 방법 등으로 나누어진다. 이 중에서 대류권의 온도 측정에 적용가능한 방법은 3 번째의 방법으로 질소나 산소의 회전 라만 산란(RRS:Rotational Raman Scattering)이 가장 흔히 사용되는 기술이다. 질소와 산소의 회전 라만 신호를 이용한 온도 측정 기술은 Cohen$^1$ 등에 의하여 처음 시도되었으며, 그 후 많은 사람들에 의하여 검증되었다.$^2$ (중략)

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.137-143
• /
• 1998

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of traction motor for electric car SIMPLE algorithm based on finite volume method is used to make linear algebra equation. The governing equations are solved by TDMA(TriDiagonal Matrix Algorithm) with line-by-line method and block correction. From the results of simulation, the characteristics of cooling pattern is strongly affected by the size of hole in stator core. In the case of high rotational speed of rotor, temperature difference along the axial direction is more decreased than that of low rotational speed.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.28-34
• /
• 1999

According to the development of tool material and the improvement of machinability of cutting material like aluminium alloy, the higher spindle speed is needed. However, the higher speed causes the heat generation of bearings, the deformation of spindle unit parts, and the rotational accuracy of spindle to be worse. Therefore, it is essential to analyze and control the heat generation and the thermal behavior of spindle unit in order to have higher speed and better rotational accuracy. This paper shows the analogy between the analyzation of heat generation and thermal behavior of high speed spindle system by finite element method and the test results of actual temperature rise through running test, and shows the necessity of cooling the spindle and inner ring side of bearings for the thermal balance of high speed spindle system.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.47-52
• /
• 1997

Friction torques, electrical contact resistances and bearing temperatures were measured on high speed angular contact ball beatings for the spindle of machine tools. The test bearings ran with oil-air lubrication at the thrust loads from 320 N to 1920 N and at the rotational speed of up to 12000 rpm. Electrical contact resistances between balls and races were measured to evaluate the formation of the lubricant film in the contact area. The test results with sufficient lubrication showed that the variations of friction torques were sensitive to the thrust loads and the rotational speeds, and that the friction torques were higher than those with insufficient lubrication. With insufficient lubrication and high thrust loads, the collapse of the lubricant film was detected even at a high rotational speed. It was concluded that these high speed beatings to run in condition of fluid lubrication should require monitoring not only the temperature increase of the bearing but also the lubricant film formation in contact areas resulting from the change in the applied load and the lubricant amount.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.513-518
• /
• 2019

마찰교반용접(Friction Stir Welding) 기술은 금속 소재를 대상으로 하는 용접기술 중의 하나로 용접대상이 되는 소재와 고속으로 회전하는 용접툴 사이의 마찰로 인한 열을 활용하여 소재의 융점 이하 온도에서 접합하는 기술이다. 이번 연구에서는 마찰교반용접을 진행할 때, 용접 대상물의 내부 온도 변화를 분석하기 위한 방법으로 수치해석기법을 사용하였다. 용접소재로는 마그네슘 합금인 AZ31을 고려하였으며, 용접현상을 멜팅풀(melting-pool)이 생성되는 유동특성으로 간주하고 유동해석을 수행하기 위해 유동특성 수치해석 툴인 FLUENT를 이용하였다. 용접과정의 유동해석을 진행하기 위해 용접소재는 고점도 뉴턴 유체로 가정하였고, 용접툴과 용접대상 소재의 경계면은 마찰 및 미끄러짐이 동시에 발생하는 조건으로 경계조건을 선정하였다. 그리고 용접툴의 회전속도 및 용접속도를 변수로 하여 다양한 해석을 진행하였다. 해석 결과로부터 용접툴의 회전속도가 높을수록, 용접속도가 느릴수록 소재 내 최고온도가 증가함을 확인할 수 있었으며, 그 중 용접툴의 회전속도 차이가 온도 변화에 더 큰 영향을 보임을 확인하였다.