• Journal of Korean Academy of Nursing
• /
• v.16 no.3
• /
• pp.67-77
• /
• 1986

The research was carried out in order to assess, at an early stage, the potential barrier in mother-child relationship in the childs' development by using the screening tool. Consequently, after modifying the Neonatal Perception Inventory developed by Broussard and testing its reliability. It has been applied to 152 mothers at the hospital of three universities in Seoul from August 1 to September 30, 1986. The data was analyzed by S.P.S.S. pro-gram and the results were as follows: 1) Mothers perceived the newborn as an individual, and evaluated their baby higher than other babies. 2) Mothers indicated difficulties in their role performance in the fellowing order-bathing, safety, detecting pain or suffering, and feeding. 3) Mothers' perception of a newborn was positive for 75% of the mothers. 4) The factor analysis of the modified tool using principal components analysis and Varimax rotation resulted in the two factors: Factor 1, Baby as an individual: Factor Ⅱ, Performances are required to meet the new-born's needs. 5) The difference in mothers' individual characteristics such as the number of childbirth, the desire to get pregnant or not, the type of deli-very, and the sex of the newborn did not influence on a mothers' perception of her newborn. As seen above, most of the mothers perceived their newborns as able individuals and expressed difficulties involved in taking care of the newborn. Also most of the mothers perceived their babies positively. My point here is, we ought to observe those mothers who perceive their babies negatively, and then compare them with those mothers who perceive their babies extremely positive or extremely negative. In the future, for more comprehensive assessment tool for maternal perception of the newborn, a repetitive verification and modification of this tool is demanded. At the same time, father's perception of the newborn should be included.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.24 no.1
• /
• pp.7-14
• /
• 2018

Background: The purpose of this study is to investigate the effects of Mulligan's bent leg raise (BLR), two leg rotation (TLR) and straight leg raise with traction (traction SLR) technique on the change of shortened hamstring length. Methods: Sixty subjects participated in this study. The subjects were randomly assigned to either the BLR group (n=20) or TLR group (n=20) or traction SLR group (n=20). 90-90 SLR test was performed for evaluation of hamstring shortening at initial time of study. After intervention, immediate effect(immediately after intervention) and effect of maintenance (after 60 minutes from intervention) were assessed. Results: All three groups showed significant differences in the immediate evaluation and the post evaluation after 60 minutes on the change of shortened hamstring length compared to the initial evaluation. When three groups were compared, in the immediate effect, BLR and traction SLR groups were higher than TLR group (p<.05). And the effect after 60 minutes, BLR group was higher than the other two groups (p<.05). Conclusion: In the results of this study, three groups showed immediately and lasting effectiveness in flexibility of shortened hamstring. In addition, BLR and traction SLR groups were more flexible than TLR group in the immediate evaluation and BLR group had better maintenance of flexibility than the other two groups in the post evaluation after 60 minutes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1484-1493
• /
• 2004

In this study, it induced to a conclusion below by experiment consideration to regarding an effective supercooling ends method of the flow cooling water in a tube of continuous ice making method and the static cooling water in a tube of continuous ice making method which used magneticfluid in a dynamic type ice storage system. Continuous ice making in a tube of the flow cooling water was shortened about 12 minutes until supercooling ends that case which gave vertical eccentricity rotation magnetic field 120rpm than did not provide magnetic field by experimental result that was tested to supercooling ends effect from shape control of magneticfluid. Continuous ice making method in a tube of the static cooling water compared with and reviewed the case that was not provided with the magnetic field and exposed cooling surface instantaneously by magnetic field. It confirmed that supercooling degree $\Delta$ $T_{c}$, $\Delta$ $T_{s}$, and $\Delta$ $T_{w}$ became lower because of heat transfering increasing by the occurrence of natural convection between after cooling starting progress time 1∼3 minutes if it did not give a magnetic field, and peformed the supercooling ends when natural convection occurred confirmed that refrigerating capacity was better. That relation $\Delta$ $T_{c}$, and $t_{e}$/($\Delta$ $T_{c}$-$\Delta$ $T_{s}$) after convection occurred, was not depended on $T_{b}$ and initial temperature if the depth of water and thickness of magneticfluid were regular and it was possible to verify conjecture of tp from $\Delta$ $T_{s}$ and $\Delta$ $T_{c}$.lar and it was possible to verify conjecture of tp from $\Delta$ $T_{s}$ and $\Delta$ $T_{c}$.c}$.>.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.2
• /
• pp.139-145
• /
• 1998

Filament winding method is widely used for composite fabrications using low viscosity liquid for-mation and processing asymmetrical structures of pressure vessel pipe rocket motor case etc. The filament winding method is affected by several parameters such as pot life of process time viscosi-ty of resin filament winding temperature and schedules curing condition and post curing condi-tion of resin. To develope high functional composite materials the rotation(5, 15, 20, 30rpm) of the winding machine was controlled by D.C motor. And the wiper to give proper tension was equipped between strand and resin bath. The resin is hooked by the design wiper. The adequate cure schedule was found by DSC. NOL ring test is carried out to investigate the basic physical properties such as design technology. The void contents in filament winding is generally higher than that of the prepreg laminated plate. These high contents of void can make a crack in resin in spite of low deformation. These problem was solved by giving tension in processing. To improve the characteristics of fiber volume fraction void contents resin/fiber bonding the winding speedc is changed under constant tension. It was found that resin impregnation was not different from in fiber contents void contents at the range of 0.5~1kg tension but it was found that resin was not impregnated at the above of 1.5kg tension. In burst test a pure PE liner was failed at a nozzle part under the $14kg/\textrm{cm}^2$ pressure but a pressure vessel of CNG was failed at a cylinder part under the $200kg/\textrm{cm}^2$ pressure.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.1
• /
• pp.35-42
• /
• 2016

The core of the machine vision that is frequently used at the pre/post-production stages is a marker alignment technology. In this paper, a method to detect the angle and position of a product at high speed by use of a unique pattern present in the marker stamped on the product, and calibrate them is proposed. In the proposed method, to determine the angle and position of a marker, the candidates of the marker are extracted by using a variation of the integral histogram, and then clustering is applied to reduce the candidates. The experimental results revealed about 5s 719ms improvement in processing time and better precision in detecting the rotation angle of a product.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8A
• /
• pp.691-701
• /
• 2011

In rotatable directional sensor networks, maximizing network lifetime while covering all the targets and forwarding the sensed data to the sink is a challenge problem. In this paper, we address the Maximum Directional Cover Tree (MDCT) problem of organizing the directional sensors into a group of non-disjoint subsets to extend the network lifetime. Each subset in which the directional sensors cover all the targets and forward the sensed data to the sink is activated at one time. For the MDCT problem, we first present an energy consumption model which mainly takes into account the energy consumption for rotation work. We also develop the Directional Coverage and Connectivity (DCC)-greedy algorithm to solve the MDCT problem. To evaluate the algorithm, we conduct simulations and show that it can extend the network lifetime.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.18-25
• /
• 2011

In a manufacturing process of metal coins, surface defects of coins are manually detected. This paper describes an new method for detecting surface defects of metal coins on a moving conveyor belt using image processing. This method consists of multiple procedures: segmentation of a coin from the background, alignment of the coin to the model, projection of the aligned coin to the best eigen image space, and detection of defects by comparison of the projection error with an adaptive threshold. In these procedures, the alignement and the projection are newly developed in this paper for the detection of coin surface defects. For alignment, we use the histogram of the segmented coin, which converts two-dimensional image alignment to one-dimensional alignment. The projection reduces the intensity variation of the coin image caused by illumination and coin rotation change. For projection, we build multiple eigen image spaces and choose the best eigen space using estimated coin direction. Since each eigen space consists of a small number of eigen image vectors, we can implement the projection in real- time.

• Asian Oncology Nursing
• /
• v.2 no.1
• /
• pp.17-26
• /
• 2002

Purpose: This study was conducted to evaluate the effects of aerobic dance on physical functionnings of women with mastectomy. The study was single group pre- & post-test time series design. The aerobic dance program was performed three times a week for eight weeks, 45${\sim}$60 minutes per session. Method: The research variables used in the study were the period(seconds) of exercise that was taken for target heart rate, activity systolic pressure, range of motion of shoulder joint in affected side, and flexibility for physical functionnings. The data were analyzed with repeated measure ANOVA and Bonferroni multiple comparisons. Results: Over the period of aerobic dance, the degree of all the research variables were changed significantly, and also differed significantly every 2 to 4 weeks. The period(seconds) of exercise that was taken for target heart rate (p <.000), systolic pressure in exercise(p =.019), range of motions of shoulder joint on the affected side(flexion, abduction, over-adduction, over-extension, external & internal rotation), and flexibility(sit & reach, back & reach) (p= .003; p=.001; p(.001; p<.001; p= .014; p<.001; p=.036; p<.001) were differed significantly respectively. Conclusion: The results suggest that the aerobic dance program for women with mastectomy can improve and recover cardiopulmonary endurance and ROM of shoulder joint and that the period of exercise had to be performed over six to eight weeks and three times a week at least.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.283-288
• /
• 2015

Two sintering methods of a pressureless sintering and a spark-plasma sintering are tested to densify the Fe-TiC composite powders which are fabricated by high-energy ball-milling. A powder mixture of Fe and TiC is prepared in a planetary ball mill at a rotation speed of 500 rpm for 1h. Pressureless sintering is performed at 1100, 1200 and $1300^{\circ}C$ for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried out under the following condition: sintering temperature of $1050^{\circ}C$, soaking time of 10 min, sintering pressure of 50 MPa, heating rate of $50^{\circ}C$, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) are obtained from the data stored automatically during sintering process. The densification behaviors are investigated from the observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder compacts show incomplete densification with a relative denstiy of 86.1% after sintering at $1300^{\circ}C$ for 3h. Spark-plasma sintering at $1050^{\circ}C$ for 10 min exhibits nearly complete densification of 98.6% relative density under the sintering pressure of 50 MPa.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.1
• /
• pp.1-12
• /
• 2009

The purpose of this study is to discovered assessment items for improving athletic efficiency and management of golf courses. Through this, the study intended to provide basic data for creating competitive golf courses and management. Important assessment items were selected by inducing preliminary assessment items and conducting a preliminary survey and a main survey for specialists through a theoretical study. For the survey results studied, reliability and average value for importance were calculated using SPSS/PC Window Release 12.0. As assessment of importance by assessment area, in athletic efficiency assessment, course management level was the highest, followed by fairness of games and operation of games. In management assessment, importance of service level, information management, facility management, management of game assistants, etc. were high. As assessment of importance by assessment item, it was found that 'variety of golf shot' and 'the length of a course' were important in course layout. Also 'start interval among teams' and 'disturbance of play' were assessed as important items in game operation, while 'fair reservation' and 'rounding rotation time' were important in fairness of games. In addition, in information management, 'kind service of golf course staffs' and 'prompt reservation and notification' were found to be important assessment items. In facility management, all assessment indexes were over 4.0, which means all of them are important for quality of golf course and competitiveness. In membership service, 'appropriate price of goods for sale' and 'service for members' were relatively important assessment items. Further, in management of game assistants, 'qualifications and skillfulness of game assistants' was assessed as a very important index. Although the current study only selected important items to assess excellent golf courses, it is necessary to apply the study results to the actual sites and verify them for golf course both at domestic and abroad.