• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.794-806
• /
• 2004

본 논문에서는 IEEE 802.11a의 OFDM 통신시스템에 대한 송수신 주파수편차의 교정기법을 연구하고 편차주파 수들의 교정오차에 의한 잡음을 분석한다. 반송주파수편차에 의한 심볼당 회전위상을 짧은 훈련신호(short preamble)의 자기상관에서 추정한다. 잡음의 영향을 줄이기 위하여 짧은 훈련신호(short preamble)를 과도표본화 (over-sampling)한다. 파일롯(pilot) 신호를 도입하여 추정된 반송주파수편차의 오차와 표본화 주파수편차에 의한 OFDM 심볼당 회전위상을 추정한다. 이러한 회전위상의 추정과 교정에 CORDIC(Coordinated Rotational Digital Computer) 프로세서 또는 각도와 복소수의 환산표를 사용하고 이것들의 구현기법과 장단점을 비교한다. 복소수와 위상은 CORDIC 프로세서와 환산표에서 한정된 비트(bit) 개수로 계산되므로 각도양자화 오차가 있게 된다. 비트개수에 따른 각도양자화 오차를 OFDM 신호의 SNR로 나타내고 IEEE 802.11a의 편차주파수 교정에서 요구되는 최소한의 비트 개수를 제시한다. 끝으로, 모의실험을 통하여 짧은 훈련신호로 반송주파수편차를 추정하고 CORDIC 프로세서와 환산표에서 사용된 비트 개수에 따른 양자화 잡음을 검증한다.

• 유통과학연구
• /
• 제13권9호
• /
• pp.103-112
• /
• 2015

Purpose - This paper aims to provide a step-by-step approach to factor analytic procedures, such as principal component analysis (PCA) and exploratory factor analysis (EFA), and to offer a guideline for factor analysis. Authors have argued that the results of PCA and EFA are substantially similar. Additionally, they assert that PCA is a more appropriate technique for factor analysis because PCA produces easily interpreted results that are likely to be the basis of better decisions. For these reasons, many researchers have used PCA as a technique instead of EFA. However, these techniques are clearly different. PCA should be used for data reduction. On the other hand, EFA has been tailored to identify any underlying factor structure, a set of measured variables that cause the manifest variables to covary. Thus, it is needed for a guideline and for procedures to use in factor analysis. To date, however, these two techniques have been indiscriminately misused. Research design, data, and methodology - This research conducted a literature review. For this, we summarized the meaningful and consistent arguments and drew up guidelines and suggested procedures for rigorous EFA. Results - PCA can be used instead of common factor analysis when all measured variables have high communality. However, common factor analysis is recommended for EFA. First, researchers should evaluate the sample size and check for sampling adequacy before conducting factor analysis. If these conditions are not satisfied, then the next steps cannot be followed. Sample size must be at least 100 with communality above 0.5 and a minimum subject to item ratio of at least 5:1, with a minimum of five items in EFA. Next, Bartlett's sphericity test and the Kaiser-Mayer-Olkin (KMO) measure should be assessed for sampling adequacy. The chi-square value for Bartlett's test should be significant. In addition, a KMO of more than 0.8 is recommended. The next step is to conduct a factor analysis. The analysis is composed of three stages. The first stage determines a rotation technique. Generally, ML or PAF will suggest to researchers the best results. Selection of one of the two techniques heavily hinges on data normality. ML requires normally distributed data; on the other hand, PAF does not. The second step is associated with determining the number of factors to retain in the EFA. The best way to determine the number of factors to retain is to apply three methods including eigenvalues greater than 1.0, the scree plot test, and the variance extracted. The last step is to select one of two rotation methods: orthogonal or oblique. If the research suggests some variables that are correlated to each other, then the oblique method should be selected for factor rotation because the method assumes all factors are correlated in the research. If not, the orthogonal method is possible for factor rotation. Conclusions - Recommendations are offered for the best factor analytic practice for empirical research.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1695-1699
• /
• 2012

This paper is proposed all digital wide-range clock and data recovery circuit. The Proposed clock data recovery circuit is possible input data rate which is suggested is wide-range that extends from 100Mb/s to 3Gb/s and used an phase error detector which can use a way of over-sampling a data by using a 1/2-rate multi-phase clock and phase rotator which is regular size per $2{\pi}$/16 and can make a phase rotation. So it could make the phase rotating in range of input data rate. Also all circuit is designed as a digital which has a specificity against a noise. This circuit is designed to 0.13um CMOS process and verified simulation to spectre tool.

• International Journal of Fluid Machinery and Systems
• /
• 제9권3호
• /
• pp.229-236
• /
• 2016

Exergetic analysis was introduced in optimization of a rotating equilateral triangular internal cooling channel with staggered square ribs to maximize the net exergy gain. The objective function was defined as the net exergy gain considering the exergy gain by heat transfer and exergy losses by friction and heat transfer process. The flow field and heat transfer in the channel were analysed using three-dimensional Reynolds-averaged Navier-Stokes equations under the uniform temperature condition. Shear stress transport turbulence model has been selected as a turbulence closure through the turbulence model test. Computational results for the area-averaged Nusselt number were validated compared to the experimental data. Three design variables, i.e., the angle of rib, the rib pitch-to-hydraulic diameter ratio and the rib width-to-hydraulic diameter ratio, were selected for the optimization. The optimization was performed at Reynolds number, 20,000. Twenty-two design points were selected by Latin hypercube sampling, and the values of the objective function were evaluated by the RANS analysis at these points. Through optimization, the objective function value was improved by 22.6% compared to that of the reference geometry. Effects of the Reynolds number, rotation number, and buoyancy parameter on the heat transfer performance of the optimum design were also discussed.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.373-375
• /
• 2002

4D CT is a dynamic volume imaging system of moving organs with an image quality comparable to conventional CT, and is realized with continuous and high-speed cone-beam CT. In order to realize 4D CT, we have developed a novel 2D detector on the basis of the present CT technology, and mounted it on the gantry frame of the state-of-the-art CT-scanner. In the present report we describe the design of the first model of 4D CT-scanner as well as the early results of performance test. The x-ray detector for the 4D CT-scanner is a discrete pixel detector in which pixel data are measured by an independent detector element. The numbers of elements are 912 (channels) ${\times}$ 256 (segments) and the element size is approximately 1mm ${\times}$ 1mm. Data sampling rate is 900views(frames)/sec, and dynamic range of A/D converter is 16bits. The rotation speed of the gantry is l.0sec/rotation. Data transfer system between rotating and stationary parts in the gantry consists of laser diode and photodiode pairs, and achieves net transfer speed of 5Gbps. Volume data of 512${\times}$512${\times}$256 voxels are reconstructed with FDK algorithm by parallel use of 128 microprocessors. Normal volunteers and several phantoms were scanned with the scanner to demonstrate high image quality.

• 한국지능시스템학회논문지
• /
• 제20권1호
• /
• pp.116-122
• /
• 2010

본 논문은 표적의 회전, 크기 변화, 이동 변화, 자세변화 등의 기하학적 변환에 강인한 표적 분류 방법을 제안한다. 우선 표적의 회전, 크기변화, 이동 변화에 대해서는 SIFT(Scale-Invariant Feature Transform) 특징 벡터들의 유사도, 스케일비, 오리엔테이션의 범위들을 이용한 CM(Confidence Map)에 기반하여 표적을 분류한다. 한편 표적의 자세 변화에 대응하기 위해 다양한 각도에서 획득한 표적 영상의 DB(database)를 이용한다. 각도의 범위는 실행 시간과 샘플링 간격에 따른 성능을 비교, 분석하여 결정한다. 제안한 표적 분류 방법의 성능을 평가하기 위해 기하학적 변화가 있는 여러 가지 영상에 대해 실험한다. 실험을 통해 제안 알고리즘이 우수한 분류 성능을 보임을 증명한다.

• 소음진동
• /
• 제8권5호
• /
• pp.964-973
• /
• 1998

본 논문에서 자기 축수 시스템의 부상과 불평형 보상 제어기를 제안한다. 특정한 동작속도에서 불균형 진동과 부상을 제어하기위해 우리는 이산시간 Q 매개변수화 제어를 사용한다. 회전자의 속도가 p=0일 때, 회전소도와 같은 주파수로 회전자의 불균형은 없다. 그래서 부상을 만들기 위해 우리는 제어기가 z=1의 단위원에서 극점을 가지는 Q매개변수화 Q를 선택한다. 그러나 회전자의 속도가 p$\neq$0일 때, 회전속도와 같은 주파수로 정현파의 외란이 존재하게 된다. 그래서 이 외란의 점근적인 소멸을 하기위해 Q 매개화변수 제어기 자유 변수 Q가 제어기가 어떠한 회전속도 p에 대한 z=expjpTs에 있는 단위 원에서 극점을 가지도록 선택된다. 첫째로, 우리는 이 연구에서 적용된 실험적인 구성을 소개한다. 두 번째로, 우리는 차분 방정식의 형태로 자기축수 시스템의 수학적인 모델을 제안한다. 세 번째로 우리는 제안된 이산 시간 Q매개변수화 제어기 설계방법을 설명한다. 제어기의 자유 매개변수 Q는 안정한 전달함수가 된다고 가정한다. 네 번째로, 우리는 설계목적을 만족하는 자유 매개변수가 복잡한 최적문제를 풀기보다는 선형 방정식을 구함으로서 만족될 수 있다. 마지막으로 몇 개의 시뮬레이션과 실험적인 결과가 제언된 제어기를 평가하기 위해 구해진다. 획득된 결과는 회전설계 속도에서의 불균형 진동을 제어하는 제안된 제어기의 효과를 나타낸다.

• 산경연구논집
• /
• 제10권5호
• /
• pp.7-20
• /
• 2019

Purpose - This study provides appropriate procedures for EFA to help researchers conduct empirical studies by using PLS-SEM. Research design, data, and methodology - This study addresses the absolute and relative sample size criteria, sampling adequacy, factor extraction models, factor rotation methods, the criterion for the number of factors to retain, interpretation of results, and reporting information. Results - The factor analysis procedure for PLS-SEM consists of the following five stages. First, it is important to look at whether both the Bartlett test of sphericity and the KMO MSA meet the qualitative criteria. Second, PAF is a better choice of methodology. Third, an oblique technique is a suitable method for PLS-SEM. Fourth, a combined approach is strongly recommended to factor retention. PA should be used at the onset. Next, it is recommended using the K1 criterion. In addition, it is necessary to extract factors that increase the total variance explanatory power through the PVA-FS. Finally, it is appropriate to select an item with a factor loading into 0.5 or higher and a communality of 0.5. Conclusions - It is expected that the accurate factor analysis processed for PLS-SEM as previously presented will help us extract more precise factors of the structural model.

• 유통과학연구
• /
• 제14권7호
• /
• pp.91-100
• /
• 2016

Purpose - Recently actively growing franchise systems distribution channel system in which franchise headquarter compared with franchise occupies an important place in distribution channel. Due to this, franchise and franchise headquarter are interdependent on task and in this situation the goal they go after, motivation and objective are probably inconsistent. If so, possibility to participate goal setting process or operating activity of opposite side is becoming bigger and in the end conflict may generate. The purpose of this study is to examine the role of the supervisor's attitude and expertise as moderating factors in the relationship between goal-incongruity/coercive power/role-incongruity and the conflict perceived by franchisee. Research design, data and methodology - This study was intended to verify how the supervisor's attitude and expertise as moderating factors in the relationship between goal-incongruity/coercive power/role-incongruity and the conflict perceived by franchisee. In order to achieve the purpose of this study, some study models and hypotheses have been established through theoretical examinations. Then, using these scales, the researcher completed the questionnaire survey. To test our hypotheses, the survey was conducted from March 9, 2016 for 20 days by random sampling, The study was implemented through a descriptive survey method using a self-administered questionnaire. A survey of 124 restaurant franchisee across Seoul and Gyeonggi Province was performed. A total of 124 completed responses were analyzed. In this study, I used SPSS 22.0 to analyze data and did frequency analysis to see demographic, and general features of the respondents; also did exploratory factor analysis to examine the validity of the items of measurement. Factor analysis was first calculated at a minimum, the number of factors, principal component analysis used when variables are committed to maximising the information with (principle component analysis) and the rotation of factors were angry about the great variable factors than 1.0 by applying Varimax rotation. In addition, I used the value of Cronbach's (Alpha) to examine the reliance of questionnaire items, final analysis the reliability factor can be found both high reliability hayeoteumeuro exceeds over 0.6 and did Multiple regression analysis to test hypothesis and also did hierarchical regression analysis to examine moderating effect. Results - To analyze the proposed model, according to the analysis result, it was found that the influence of goal-incongruity, coercive power, and role-incongruity on the perceived conflict of franchisee is moderated by the supervisor's attitude and expertise. That is, the more the supervisor's attitude and expertise were positive, the more the conflicts of the goal-incongruity, coercive power, and role-incongruity were decreased. It also confirmed previous research's finding that goal-incongruity, coercive power, and role-incongruity positively influence on the conflict. Conclusions - According to the results of this research which reduces the conflict of franchise from the in consistent goal; coercive power, and inconsistent role of superiors, it provides very important implications for franchise headquarter which has franchise system and also give them some suggestion about how to recruit superiors and what kind of training may be fit for the superiors.

• 보건교육건강증진학회지
• /
• 제18권3호
• /
• pp.117-131
• /
• 2001

This study was attempted to develope a highly reliable and valid tool which is useful to assess the Korean obese adolescents' stress and coping method. The data were collected from the total of 600 obese students from middle and high schools in Pusan. The author used a convenience sampling method. The data collection was done from March 2 to July 11, 1999. The analysis of the data was done with SPSS Win(10.0) for descriptive statistics and factor analysis. The preliminary tool was composed of 72 items(stress items: 34, coping method items: 38) with the five point Likert scale. Item analysis and inter consistency were calculated for reliability and validity through pre-test. The preliminary tool was analyzed for reliability and validity. Finally, the tool was of 65 items(stress items: 33, coping method items: 32). The results were as follows: 1. Cronbach Coefficient Alpha for the 33 items of stress was .9485 and the 32 items of coping method was .8534. 2. The factor analysis was done in order to confirm construction and the items were extracted Oblimin rotation and Maximum likelihood extraction method. 3. The factor analysis showed 6 factors in stress and 10 factors in coping method. These 6 factors of stress explained 62.4％ and 10 factors of coping method explained 57.4％. 4. Six factor of stress lable were 〈outward appearance〉, 〈boyfriend/ girlfriend〉, 〈occur an outbreak of disease〉, 〈mutual relation of family〉, 〈an obese figure〉, 〈be a burden on exercise〉. 5. Ten factor of coping method lable were 〈be concerned about another affairs〉, 〈recreation activities〉, 〈self-violence〉, 〈relaxation〉, 〈hobby activities〉, 〈avoid a situation〉, 〈communication〉, 〈music〉, 〈negative behavior〉, 〈positive thinking〉. The results of using this scale in a study will contribute to design an appropriate school health management of obese students, and also it will contribute to the development of nursing research.