• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.184-187
• /
• 2000

This paper describes action of synchronous error between z axis and spindle axis on rigid tapping. Because rigid tapping cuts the threads synchronizing the movement of z axis to spindle rotation, synchronous error between z axis and spindle is very important. Increase of synchronous error degrades the accuracy of thread and crushes the tap in worst case. So we developed the realtime measurement system of synchronous error in order to know the action of synchronous error on rigid tapping. In result, we have known that synchronous error was increased according to rise of spindle speed and z axis speed. And because the cutting torque(M3-30Ncm∼M10-300Ncm) on rigid tapping are less than maximum motor torque(3500Ncm), it specially doesn't affect the synchronous error. The most important parameter which has affected the increase of synchronous error was acceleration/deceleration time. On worst case, spindle motor was tripped because of the excess of synchronous error. Because the acceleration/deceleration time ocuupies the most of the total cutting time, in order to move on the high speed rigid tapping, the acceleration/deceleration time of spindle must be remarkably reduced.

• The Journal of the Korean dental association
• /
• v.54 no.7
• /
• pp.563-574
• /
• 2016

A clear overlay appliance is a type of a removable appliance made from transparent thermoplastic plastic film that covers the entire dentition to move the teeth. It is one of the most favored orthodontic methods opted for by adult patients; this treatment is esthetic, does not cause discomfort and allows oral hygiene to be easily managed when compared to other conventional fixed treatment methods. However, the use of clear overlay appliances, such as invisalign or clear aligner, is associated with various clinical challenges. In particular, the appliances require longer treatment periods compared to fixed treatment, and due to the structural characteristics of the appliances, it is difficult to make proper posterior occlusion and certain type of tooth movement, including extrusion, rotation and tip. Thus, the clear overlay appliances are regarded as supplementary appliances by most orthodontists and have been used for simple orthodontic treatments, such as partial anterior alignments or orthodontic relapse cases. Owing to the remarkable advancement in the field of 3D digital technology over a period of 15 years, the accuracy and convenience of modern clear overlay appliances have continuously improved. Moreover, orthodontic outcomes have also been greatly improved by the introduction of new materials and successful application of various biomechanical methods from conventional orthodontic treatments in the design of clear overlay appliances. This study investigates the clinical limitations that should be considered during the application of clear overlay appliances and also examines the efforts and methods used to overcome these challenges.

• The korean journal of orthodontics
• /
• v.47 no.4
• /
• pp.268-274
• /
• 2017

The purpose of this article is to introduce a simple appliance that uses a setup model and a nickel-titanium (Ni-Ti) wire for correcting the mesial rotation and drift of the permanent maxillary first molar. The technique involves bonding a Ni-Ti wire to the proper position of the target tooth on a setup model, followed by the fabrication of the transfer cap for indirect bonding and its transfer to the patient's teeth. This appliance causes less discomfort and provides better oral hygiene for the patients than do conventional appliances such as the bracket, pendulum, and distal jet. The treatment time is also shorter with the new appliance than with full-fixed appliances. Moreover, the applicability of the new appliance can be expanded to many cases by using screws or splinting with adjacent teeth to improve anchorage.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.10 no.1
• /
• pp.8-15
• /
• 2001

The Class III malocclusion classified in two types of Skeletal Class III and Pseudo Class III. In the case of the maxillary deficiency, the protraction H-G(facemask) with Bonded RPE can be used. For children with A-P and vertical maxillary deficiency, the preferred treatment is to move the maxilla into a more anterior and inferior position, which also increases its size as bone is added at the posterior and superior sutures. Successful forward repositioning of the maxilla can be accomplished before age 8. To resist tooth movement as much as possible, the maxillary teeth should be splinted together as a single unit. The maxillary appliance must have hooks for attachment to the facemask that are located in the canine-primary molar area above the occlusal plane. The facemask usually worn until a positive overjet of 2-5mm is achieved interincisally. Occipital chin cup is successful in those patients who can bring their incisors close to an edge-to-edge position when in centric relation. This treatment is particularly useful in patients who begin treatment with a short lower anterior facial height, as this type of treatment can lead to an increase in lower anterior facial height. If the pull of the chin cup is directed below the condyle, the force of the appliance may lead to a downward and backward rotation of the mandible.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.461-464
• /
• 2001

본 연구에서는 생체 임피던스를 이용하여 3채널 상지(upper arm) 운동 분석 시스템을 제작하였다. 각 채널은 상지의 외전(supination)과 내전(pronation), 팔꿈치(elbow)의 폄과 굽힘, 손목(wrist)의 평과 굽힘에 따른 각 관절의 임피던스 변화를 얻을 수 있도록 설계되었다. 상체 임피던스는 전극의 부착위치에 의존하므로 정밀한 감지를 위해 상지 운동에 대한 임피던스의 변화와 각도계(goniometer)의 각도 변화와의 상관관계를 통하여 상관 관계가 높고, 변화량이 가장 크고 다른 관절의 움직임에 따른 영향이 최소인 곳을 찾아 이를 최적의 전극 위치로 정하였다. 그리고, 선정된 최적의 전극 위치에서 임피던스 변화를 얻어 상지 운동을 분석해 보았다. 최적의 전극 위치에서 손목과 팔꿈치의 각도 변화와 임피던스 변화의 상관 계수는 각각 0.94, -0.97로 아주 높은 상관 관계를 보였다. 또한 이전의 다른 연구에서 임피던스 방법으로 구현해 본적이 없는 팔의 회전(rotation)도 분석이 가능하였다. 이 시스템은 피검자의 동작에 거의 제한을 주지 않고, 가벼우며, 장시간 측정이 용이할 뿐만 아니라 시스템 구성이 영상 분석기에 비해서 단순하다는 장점을 가지고 있다. 본 연구에서 제안하는 방법은 재활과 생체역학, 로봇의 원격 제어, 그리고 가상 현실에서의 동작 구현 등에 활용 할 수 있을 것으로 사료된다.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.136-137
• /
• 2002

We have been researching upgrade version of a stereotactic whole body frame, used for evaluating daily setup accuracy of the patient positioning during fractionated extra-cranial stereotactic radiotherapy. Currently, we are focusing on the development of a new stereotactic whole body frame, and then will handle organ movement produced by breathing at the next stage. MeV-Green is chosen for the best immobilizer possible and the epoxy board is for the frame with the dimension of 110 em in length, 50 cm in width in order to maximize transmission rate of the beam from lateral or posterior direction and to fit CT and PET scanners with an aperture of 55 cm at least. The key point of an upgraded stereotactic whole body frame will be set on the collision-free rotation of the gantry with the frame, and the development of the checking structure for the daily patient repositioning regarding internal target.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.193-197
• /
• 2018

Objective: The relationship between the rest intervals during physical tasks and performance enhancement has been studied. However, whether or not different rest intervals would result in altered multiplanar ankle kinematics during performance of the Star Excursion Balance Test (SEBT) is unknown. Method: Fifteen healthy subjects (7 males and 8 females) without a history of ankle injuries were participated in this study. 3 rest intervals of 10, 20, and 40 seconds were used during the current study. Three visits were required in order to complete the 3 rest intervals. Variables of interest included dorsiflexion (DF) excursion, tibial internal rotation (TIR), and eversion (EV) excursions. The means of ankle angular excursions were compared across the 3 directions in the 3 rest interval groups. Results: There were no significant main effects for any variables between restintervals. However, DF excursion in the anteromedial (AM) direction was greaterthan in both the medial (M) and posteromedial (PM) directions and was greater in the M direction compared to the PM direction. TIR excursion in the AM direction was less than in both the M and PM directions. Conclusion: Different rest intervals ranging from 10 to 40 seconds did not influence ankle angular excursions during the SEBT in a healthy population. However, our results suggest that multiplanar motion is necessary during the SEBT and differs depending on the direction of movement.

• Archives of Craniofacial Surgery
• /
• v.13 no.2
• /
• pp.130-134
• /
• 2012

Purpose: Brown syndrome is motility disorder of the eyeball which shows limited elevation in adduction and occurs very rarely after eye surgery. The authors have experienced a case of strabismus-like Brown syndrome combined with blepharoptosis and report this case with the review of literatures. Methods: A 28-year-old female suffered from hypotropia in the primary gaze and severe blepharoptosis with diplopia of the right eye after upper blepharoplasty. Rotation showed an inability to elevate the adducted right eye. She underwent extraocular muscle surgery about the 7 mm tucking of the right superior rectus muscle and 6 mm recession of right inferior rectus muscle. Intraoperatively, injury of the superior rectus muscle and foreign body were observed. Seven months after the extraocular surgery, the patient underwent frontalis muscle transfer on the right upper eyelid for the correction of blepharoptosis. Results: Postoperatively, the patient was orthophoric in the primary gaze, and she had improvements in the correction of blepharoptosis and eyeball movement. Conclusion: Repeated eyelid surgeries increase the risk of ocular motility disorder. Careful approach is essential for the proper treatment and successful outcome in secondary surgeries.

• Geotechnical Engineering
• /
• v.4 no.2
• /
• pp.25-32
• /
• 1988

This paper first presents the distributions of static lateral earth pressure in case of translational o.all movement (ATRA) , obtained respectively by the Dubrova method and by the method where Chang's idea is applied to the former, acting on the rigid retaining vertical wall with horizontal sand backfill. Total active resultant forces and the points of application of those forces, calculated results by the two methods, are compared with the experimental results recently published by Fang Y.S. and Ishibashi I. A comparative study about the distribution of static lateral earth pressurein each case of rotation about top(AT) and base (AB), on which the writer studied previously, is also conducted along with the above experimental results. The following results are obtained 1) In case of AT and ATRA, the experimental results are in good agreement with the calculated results by the Dubrova's method. 2) In case of AB, the results of the Dubrova's method are very inconsistent with those of model test, where as th method 9.here Chang's idea is applied, corresponds well, even though there is a small deviation.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.120-121
• /
• 2006

In this paper, We have designed a face recognition system based on the embedded Linux. This paper has an aim in embedded system to recognize the face more exactly. At first, the contrast of the face image is adjusted with lightening compensation method, the skin and lip color is founded based on YCbCr values from the compensated image. To take advantage of the method based on feature and appearance, these methods are applied to the eyes which has the most highly recognition rate of all the part of the human face. For eyes detecting, which is the most important component of the face recognition, we calculate the horizontal gradient of the face image and the maximum value. This part of the face is resized for fitting the eye image. The image, which is resized for fit to the eye image stored to be compared, is extracted to be the feature vectors using the continuous wavelet transform and these vectors are decided to be whether the same person or not with PNN, to miminize the error rate, the accuracy is analyzed due to the rotation or movement of the face. Also last part of this paper we represent many cases to prove the algorithm contains the feature vector extraction and accuracy of the comparison method.