• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1905-1913
• /
• 2002

Using the finite element method, this study investigates the dynamic time responses of a flexible spinning disk of which axis of rotation is misaligned with the axis of symmetry. The misalignment between the axes of symmetry and rotation is one of the major vibration sources in optical disk drives such as CD-ROM, CD-R, CD-RW and DVD drives. Based upon the Kirchhoff plate theory and the von-Karman strain theory, three coupled equations of motion for the misaligned disk are obtained: two of the equations are for the in-plane motion while the other is for the out-of-plane motion. After transforming these equations into two weak forms for the in-plane and out-of-plane motions, the weak forms are discretized by using newly defined annular sector finite elements. Applying the generalized-$\alpha$ time integration method to the discretized equations, the time responses and the displacement distributions are computed and then the effects of the misalign ment on the responses and the distributions are analyzed. The computation results show that the misalignment has an influence on the magnitudes of the in-plane displacements and it results in the amplitude modulation or the beat phenomenon in the time responses of the out-of-plane displacement.

• PNF and Movement
• /
• 제16권1호
• /
• pp.115-123
• /
• 2018

Purpose: The aim of this study was to investigate the effect of mandible position on proprioception and range of motion (ROM) during neck stabilization exercise using a sling in healthy adults. Methods: The subjects were randomly assigned to either a sling exercise and mandible open group (n=10) or a sling exercise and mandible closed group (n=12). The sling exercise-mandible open group and sling exercise-mandible closed group took part in an exercise program for 30min, three times per week for 4 weeks. After each training session, head repositioning accuracy (HRA) and the ROM of the cervical spine were measured. Wilcoxon's test was conducted to verify changes within each group, and the Mann-Whitney U test was performed to examine between-group differences. Results: The HRA of the cervical spine was significantly increased during left rotation and extension in the sling exercise-mandible open group. In addition, there were significant differences in both rotations and extension in the two groups. The ROM of the cervical spine increased significantly during both rotations in the sling exercise-mandible closed group. In addition, there was a significant difference in right rotation and extension in both groups. Conclusion: Cervical stabilization exercise using a sling, with the mandible closed increased proprioception and the ROM of the cervical spine.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.51-62
• /
• 2003

This study was attempted to kinematical characteristics of the El-grip swing with 1turn to el-grip in elite horizontal bar for the purpose of improving performance. The subjects were three males who were 2002 Busan Asian Games in men's team. The three dimensional motion analysis with DLT method was executed using three video cameras of analyzing the actual competition situation. In point of analyzing the actual competition situation, it is expected that gymnastics and coaches have the effective informations, and the following conclusion had resulted. 1. In case of release, It is impotant to make fast horizontal velocity of CM, high vertical position of CM, large hip and shoulder angle. Also It should be performed release motion of trunk rotation angle(+). 2. During LHR the action should be made at higher position than the CM and the shoulder joint is moving within $127{\pm}16.82$. It is important to make large lunk rotation angle. 3. During Hop, the RHR motion should be done in high position with short time and fast twisting action and to reduce the vertical speed is important.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.185-204
• /
• 2003

The purpose of this study was to obtain the data for stable and accurate techniques of the free throw in basketball. The subjects of this study were seven male basketball player consisted of college students athletes. Free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. The variables were the velocity, the angular velocity of the upper extremity segments, degree, and angular momentum. The result of analysis is summarized as follows. 1. The velocity and angular velocity of the upper extremity segment was showed an gradual increase and a smooth velocity transfer, transferring from proximal segment to distal segment at free throw motion in basketball. 2. The local term and remote term angular velocity momentum of the proximal segment showed larger than that of the distal segment in X, Y, Z axis component all. 3. The remote term angular momentum was showed larger than that of the local term angular momentum in X, Y, Z axis component all. 4. The angular motion of the upper trunk and upper arm, upper arm and forearm was showed in opposite direction and symmetrical angular momentum in local term angular momentum of the Y and Z axis component. 5. All the segments of upper extremity segment was showed left rotation in remote term angular momentum of the Y axis component and right rotation in remote term angular momentum of the Z axis component.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.498-505
• /
• 2024

In this paper, a cable-driven endoscopic manipulator (CEM) is designed for the Chinese latest compact fusion reactor. The whole CEM arm is more than 3000 mm long and includes end vision tools, an endoscopic manipulator/control system, a feeding system, a drag chain system, support systems, a neutron shield door, etc. It can cover a range of ±45° of the vacuum chamber by working in a wrap-around mode, etc., to meet the need for observation at any position and angle. By placing all drive motors in the end drive box via a cable drive, cooling, and radiation protection of the entire robot can be facilitated. To address the CEM motion control problem, a discrete trajectory tracking method is proposed. By restricting each joint of the CEM to the target curve through segmental fitting, the trajectory tracking control is completed. To avoid the joint rotation angle overrun, a joint limit rotation angle optimization method is proposed based on the equivalent rod length principle. Finally, the CEM simulation system is established. The rationality of the structure design and the effectiveness of the motion control algorithm are verified by the simulation.

• Earthquakes and Structures
• /
• 제10권2호
• /
• pp.329-350
• /
• 2016

A parametric study was conducted to investigate the seismic deformation demands in terms of drift ratio, plastic base rotation and compression strain on rectangular wall members in frame-wall systems. The wall index defined as ratio of total wall area to the floor plan area was kept as variable in frame-wall models and its relation with the seismic demand at the base of the wall was investigated. The wall indexes of analyzed models are in the range of 0.2-2%. 4, 8 and 12-story frame-wall models were created. The seismic behavior of frame-wall models were calculated using nonlinear time-history analysis and design spectrum matched ground motion set. Analyses results revealed that the increased wall index led to significant reduction in the top and inter-story displacement demands especially for 4-story models. The calculated average inter-story drift decreased from 1.5% to 0.5% for 4-story models. The average drift ratio in 8- and 12-story models has changed from approximately 1.5% to 0.75%. As the wall index increases, the dispersion in the calculated drifts due to ground motion variability decreased considerably. This is mainly due to increase in the lateral stiffness of models that leads their fundamental period of vibration to fall into zone of the response spectra that has smaller dispersion for scaled ground motion data set. When walls were assessed according to plastic rotation limits defined in ASCE/SEI 41, it was seen that the walls in frame-wall systems with low wall index in the range of 0.2-0.6% could seldom survive the design earthquake without major damage. Concrete compressive strains calculated in all frame-wall structures were much higher than the limit allowed for design, ${\varepsilon}_c$=0.0035, so confinement is required at the boundaries. For rectangular walls above the wall index value of 1.0% nearly all walls assure at least life safety (LS) performance criteria. It is proposed that in the design of dual systems where frames and walls are connected by link and transverse beams, the minimum value of wall index should be greater than 0.6%, in order to prevent excessive damage to wall members.

• 디지털융복합연구
• /
• 제13권7호
• /
• pp.373-380
• /
• 2015

본 연구는 테니스 한손과 양손 백핸드 스트로크 동작에서 하지관절 움직임의 차이를 확인하여 유형별 특성을 밝히는데 그 목적이 있으며 그 결과는 다음과 같다. 볼의 속도를 결정하는 중요한 요인인 라켓헤드의 합성 속도는 양손 백핸드 스트로크 동작이 한손보다 빠른 속도를 나타냈다. 양손 백핸드 스트로크는 하체의 움직임을 최소화시키고 몸통 회전을 통한 스트로크를 하는 반면 한손 백핸드 스트로크는 몸통을 이용한 스트로크를 하기 보다는 공을 쫓아가듯이 스트로크 하는 것으로 나타났다. 슬관절의 신전모멘트는 한손 백핸드 스트로크가 큰 것으로 나타났지만, 내번모멘트와 회내모멘트 그리고 굴곡모멘트는 양손 스트로크에서 크게 나타났다. 고관절의 경우 신전, 내번, 회내 모멘트가 양손 백핸드 스트로크가 한손 보다 모두 큰 것으로 나타났는데 특히 내번모멘트의 경우 큰 차이를 나타난 반면, 외번모멘트는 한손 백핸드 스트로크가 큰 것으로 나타났다.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.61-68
• /
• 2007

The purpose of this study was to analyze the shoulder joint torque and muscle pattern performing as Tennis serve by Isokinetic motions on Isomed 2000. The subject, who was 5 males Korean national high school tennis players. By analyzing the flexion/extension of the shoulder, the peak torque of the internal/external rotation motion(at 60,180 and 300 degree/sec) at peak torque degree, the weight, peak torque, and power. combined with the timing of the electrode of the attached trapezius and posterior deltoid at the three part. From the data analysis & discussion the following conclusions were drawn. When doing a shoulder extension, the peak torque can be widely seen at 60degree per second. However the degree may be different depending on angular velocity. When doing an internal rotation at 90degree abduction, peak torque per weight was seen at 60degree per second. The degree of peak torque was at 31.6-44.2 and peak power was faster when angular velocity was increased. The aspect of muscle pattern was seen more at the internal rotation in the 90degree abduction rather than the shoulder extension. However the angular velocity was not influenced by muscle mobilization(in order of anterior deltoid, posterior deltoid and trapezius. To properly apply the above conclusion, when tennis players serve it is better the elbow be impacted by the extension. when doing isokinetic motion it is better to increase angular velocity and improve muscle power. also the anterior deltoid amongst the shoulder muscle should be improved to develop serve speed.

• 한국멀티미디어학회논문지
• /
• 제16권1호
• /
• pp.42-49
• /
• 2013

비디오 열의 각 프레임에는 카메라의 움직임에 따라 물체의 평행 이동 및 회전 운동이 반영된다. 이 때 물체의 불필요한 회전 운동은 영상의 품질을 저하시킬 뿐 아니라 시청자 피로도를 증가시키는 주요 원인이 된다. 본 논문에서는 동영상 촬영 중 카메라의 불필요한 흔들림으로 인한 프레임의 회전을 변형된 모젯변환을 이용하여 보정하는 새로운 방법을 제시한다. 모젯 변환은 이산 라돈 변환의 한 종류로서, 회전된 프레임의 보정에 적용하기 위해 본 논문에서는 다음과 같이 변형한다. 먼저, 보다 정확한 회전각 추출을 위해 보간을 이용하여 bin 값을 계산한다. 그리고 현재 프레임과 기준 프레임에 대해 움직임 추정을 적용하여 카메라의 평행 이동을 보상한 후, 카메라의 회전에 따른 bin 값의 변화가 없는 영역을 설정하여 모젯 변환을 적용한다. 또한 모젯 변환의 각 투영 방향에 대해 한 개만의 bin을 계산함으로써 계산량을 감소시킨다. 평행이동 및 회전 운동을 갖는 다양한 시험 비디오 열에 대해 적용된 모의 실험을 통해 제안된 방법이 프레임의 회전을 보정하는데 매우 효율적임을 볼 수 있었다.

• 대한물리치료과학회지
• /
• 제31권1호
• /
• pp.88-97
• /
• 2024

Background: This study was to investigate effects of Correlation Analysis between Cervical-Vertebra Angle and Neck Range of Motion, Muscle Strength, Sternocleidomastoid Thickness of Patients with Forward Head Posture Design: Correlation Analysis. Methods: The subjects of this study were a total of 54 people in the forward head position and their ages were between 30 and 50 years old. The subjects cranio-vertebral angles, neck extension, neck flexion, neck rotation angles, neck flexor strength, neck extensor strength, sternocleidomastoid thickness were evaluated through measuring instruments. The thickness of the sternocleidomastoid muscle was measured using an imaging ultrasound diagnostic device (ultra sound, Versana Premier, GE Medical systems, China). CVA was measured by measuring the side photo of the subject was taken with a camera and evaluated.. neck joint range of motion was measured through digital inclinometer for extension, flexion, and neck rotation. neck muscle strength was measured by measuring the using a digital sthenometer. Data analysis in this study was statistically processed using SPSS version 26.0 (IBM SPSS Inc., USA). Correlation analysis was used and the statistical significance level was set at 0.05. Results: The results neck extension(r= 0.70^**), neck flexion(r= 0.67^**), neck rotation(r= 0.56^**), neck extensor muscle strengt(r= 0.85^**), neck flexor muscle strength(r= 0.66^**), sternocleidomastoid thicknes(r= -0.81^**) It indicates that there is a correlation. Conclusion:These results improve the Cervical-vertebra angle of patients with forward head posture should include a program to improve the thickness of the SCM. In the future, study can be used as an evidentiary material for treatment interventions to improve the Cervical-vertebra angle of patients with forward head posture.