• Clinics in Shoulder and Elbow
• /
• 제21권1호
• /
• pp.15-21
• /
• 2018

Background: This study was undertaken to compare the outcome of supervised and home exercises with respect to range of motion (ROM), pain, and Single Assessment Numeric Evaluation (SANE). We further correlated the ROM recovery and pain reduction as well. Methods: The study included 49 patients who underwent arthroscopic rotator cuff repair. Rehabilitation was initiated after 4 weeks of immobilization. A total of 29 patients performed supervised exercise 3 times a week. Standardized education and brochures for review were provided to the remaining 20 patients who insisted on home rehabilitation. Statistical analysis was performed for comparing pain Numerical Rating Scale (NRS), SANE, and ROM. In addition, we also evaluated the correlation between pain and ROM. Results: Comparison of the two groups revealed no significant differences in forward flexion, internal rotation, abduction, and pain NRS. However, SANE at the 9th week (63.8 vs. 55.0, p=0.038) and improvement of external rotation from the 5th to the 9th week (17.6 vs. 9.3, p=0.018) were significantly higher in the supervised exercise group as compared to the home exercise group. Correlation of pain NRS with forward flexion, external rotation, internal rotation and abduction were statistically not significant (correlation coefficient=0.032 [p=0.828], -0.255 [p=0.077], 0.068 [p=0.642], and -0.188 [p=0.196], respectively). Conclusions: The supervised rehabilitation after arthroscopic rotator cuff repair showed better improvement in external rotation and higher SANE score after 4 weeks of rehabilitation exercise. However, no statistically significant correlation was observed between the recovery of ROM and short-term pain relief.

• 한국전자통신학회논문지
• /
• 제14권2호
• /
• pp.411-416
• /
• 2019

본 연구에서는 딤플공의 회전축을 찾아가는 상태를 측정하는 영상 기반 시스템을 개발였다. 일부 골프공은 제조과정에서의 불량 및 공을 치면서 발생하는 볼표면의 스크래치에 의해서 회전축이 틀어진다. 이렇게 흠이있는 골프공은 드라이브샷등에 의해 비행하는 과정중에 슬라이스 등의 원인이 된다. 딤플 골프공은 아이언이나 드라이버로 타격시 회전 및 직선운동을 이루며 진행을 하며 회전은 일정한 시간이 지나면 일정한 축을 중심으로 진행되는 바, 회전중심을 찾아가는 과정에서 슬라이스등이 진행된다. 만일 볼을 타격하는 시점부터 고유 회전축에 일치시켜 타격한다면 골프샷의 오차가 줄어든다. 본 논문에서는 골프공의 수렴회전축을 찾는 시스템을 영상 시스템으로 개발하였으며, 실험을 통해 시스템 개발의 타당성을 입증하였다.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.81-88
• /
• 2006

본 논문에서는 RLG를 사용하는 관성항법시스템에서 자이로 출력의 적분 과정에서 유발되는 비교환 오차를 정의하고 이에 대한 해석을 수행한다. 이를 위하여 RLG를 사용하는 관성항법시스템에 나타나는 진동성 운동, 원추운동, AV 마운트에 의하여 유발되는 ISA 운동, 항체의 실제 운동 등을 살펴보고, 각각의 운동에 의하여 유발되는 비교환 오차를 해석한다. 비교환 오차 해석은 회전벡터와 자이로 출력 사이의 관계식과 좌표변환행렬과 각속도 벡터 사이의 관계식을 이용하여 유도된다.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.519-545
• /
• 2013

An outline of the Timoshenko beam theory is presented. Two differential equations of motion in terms of deflection and rotation are comprised into single equation with deflection and analytical solutions of natural vibrations for different boundary conditions are given. Double frequency phenomenon for simply supported beam is investigated. The Timoshenko beam theory is modified by decomposition of total deflection into pure bending deflection and shear deflection, and total rotation into bending rotation and axial shear angle. The governing equations are condensed into two independent equations of motion, one for flexural and another for axial shear vibrations. Flexural vibrations of a simply supported, clamped and free beam are analysed by both theories and the same natural frequencies are obtained. That fact is proved in an analytical way. Axial shear vibrations are analogous to stretching vibrations on an axial elastic support, resulting in an additional response spectrum, as a novelty. Relationship between parameters in beam response functions of all type of vibrations is analysed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.215-219
• /
• 2002

In this study, we show the numerical and the experimental results for fluid motions inside a rectangular container subjected to a background rotation added by a rotational oscillation. In the numerical computation, we used a parallel computer system of PC-cluster type. Attention is given to dependence of the flow patterns on the parameter change. It shows that the flow becomes in a periodic state at low Reynolds numbers and undergoes a transition to a chaotic motion at high Reynolds numbers. It also shows that the fluid motion tends to be depth-independent at ${\epsilon}$ up to 0.3 for Re lower than 5235.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.258-263
• /
• 2011

The direction of the cutting tool plays a critical role in elliptical vibration cutting(EVC) where the cutting tool cuts workpiece in a trochoidal motion. In this study, EVC cutting device was developed using two parallel piezoelectric materials and it was observed that the rotation direction of the tool reverses as the EVC device undergoes resonance at which either flexural(cutting direction) or longitudinal( thrust direction) mode shapes occurs. To analytically explain reversal of the rotation direction, kinematic motion analysis of the tool was modified to incorporate amplification of the vibration amplitude and phase introduced by resonance. It successfully demonstrated, through Matlab simulation, reversal of the rotation direction of the cutting tool as the excitation frequency increases beyond resonance frequencies at which either flexural or longitudinal vibration occurs.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2008년도 공동추계학술대회
• /
• pp.245-246
• /
• 2008

The goal of this study is to explore the possibility of KLT tracker for tracking the features between two images including rotation and shift. As a test site, Jangsu-Gun area of South Korea is selected and the images taken from UAV camera are used for analysis. The analysis was carried out using KLT tracker developed in a PC environment. The results of the experiment used two images with the large overlapping area are compared with the results of two images with the little overlapping area and rotation. Overall, the research indicates that the integrated features of littlerotation and motion images can significantly increase during the tracking process. But using KLT tracker for extracting and tracking features between images with large rotation and motion, the number of tracked features are decreased.

• Structural Engineering and Mechanics
• /
• 제2권3호
• /
• pp.257-267
• /
• 1994

Motions of an unsymmetric rigid body on a rigid floor subjected to earthquake excitations with special attention to coefficient of friction are investigated. Motions of a body in a plane are classified (Ishiyama 1980) into six types, i.e. (1) rest, (2) slide, (3) rotation, (4) slide rotation, (5) translation jump, (6) rotation jump. Based upon the theoretical and experimental research work special attention is paid to the sliding of a body. The equations of motions and the behavior of coefficient of friction in the time of floor excitation are studied. One of the features of this investigation is the introduction and estimation of the "time dependent" coefficient of friction. It has been established that the constant kinetic coefficient of friction $${\mu}(kin){\sim_\sim}0.8{\mu}(stat)$$ does not give the appropriate results. The method for the estimation of the friction coefficient variation during the time is given.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.115-120
• /
• 2001

A gyroscope is a rotating body possessing one axis of symmetry and whose rotation about the symmetry axis is relatively large compared with the rotation about any other axis. Tuning fork is this type of structure that various modem gyro-sensors are based on. In this paper, dynamic behavior of a cantilevered beam subjected ta a base rotation with respect to the eccentric axis that is parallel to the beam axis is analyzed. The final equations of motion in terms of generalized coordinates can be solved with numerical scheme with various values of angular velocities and angular accelerations of the rotating axis. In contrast to the case of rotating cantilever beam like helicopter blade, the rotational motion with respect to the beam axis has effect to decrease the stiffness of the beam and has unstable region depending on the magnitude of the rotational angular velocity and angular acceleration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2554-2557
• /
• 2008

Effect of a particle's spin is investigated numerically by considering the effect of lift occurring due to difference of rotations of a particle and of fluid such as the Saffman lift and Magnus force. These lift forces have been neglected in many previous works on particle-laden turbulence. The trajectory of particles can be changed by the lift forces, resulting in significant modification of the stochastic characteristics of heavy particles. Probability density functions and autocorrelations are examined of velocity, acceleration of solid particle and acceleration of fluid at the position of solid particle. Changes in velocity statistics are negligible but statistics related with acceleration are a little bit changed by particle's rotation. When a laden particle encounters with coherent structures during the motion, the particle's rotation might significantly affects the motion due to intermittently large fluid acceleration near coherent structures.