• 대한치과교정학회지
• /
• 제54권3호
• /
• pp.160-170
• /
• 2024

Objective: Owing to the availability of 3D software, scanners, and printers, clinicians are encouraged to produce in-office aligners. Recently, a new direct-printing resin (Tera Harz TC-85DAC) has been introduced. Studies on its mechanical characteristics and biological effects have been published; however, evidence on its efficacy in orthodontic treatment remains scarce. This pilot study aimed to investigate the accuracy of teeth movement achieved with direct-printed aligners. Methods: Seventeen patients (eight males and nine females) with a mean age of 27.67 ± 8.95 years, presenting with dental rotations < 30° and spaces/crowding < 5 mm, were recruited for this study. The teeth movement was planned starting from a T0 digital dental cast. The 3D direct-printed aligners were produced using Tera Harz TC-85DAC resin. Once the orthodontic treatment was completed, a final digital cast was obtained (T1). The planned teeth positions were then superimposed onto the T0 and T1 digital models. The differences between the programmed movements and the achieved overall torque, tip, rotation, and transverse dimensions were assessed using the paired t test or Wilcoxon's signed rank test. Results: The overall accuracies for torque, tip, and rotation were 67.6%, 64.2%, and 72.0%, respectively. The accuracy of the change in transverse diameter was 99.6%. Conclusions: Within the limits of the present pilot study (difficulties with abnormally shaped teeth and use of attachments), it can be concluded that 3D printed aligners can be successfully printed in-house and utilized for mildly crowded cases, with a comparable accuracy of tooth movement to that of other aligners.

• 대한토목학회논문집
• /
• 제42권2호
• /
• pp.291-298
• /
• 2022

최근 개발되는 드론은 저가이면서 운용의 편의성 또한 높아 드론을 이용한 공간정보 제작 및 활용이 나날이 증대되고 있다. 그러나, 대부분 저가형의 드론은 저정밀도 GNSS (Global Navigation Satellite System), IMU (Inertial Measurement Unit)를 탑재하여 영상을 취득하기 때문에 영상이 초기에 가지고 있는 위치정보 및 회전각 요소의 정확도가 낮다. 또한, 기체가 작고 가벼워 바람의 영향을 많이 받기 때문에 일정한 중복도를 유지하기에 어려움이 있으며 이러한 문제가 위치결정 정확도에 영향을 미친다. 이에 본 연구에서는 외부표정요소 변화에 따른 위치 정확도 변화를 분석하기 위하여 서로 다른 시기에 촬영한 영상을 Pix4D Mapper로 영상처리하고 성과물의 정확도를 분석하였다. 외부표정요소에 따른 정확도 변화를 세밀하게 분석하기 위하여 1차 처리 결과의 외부표정요소를 2차 처리 시 메타데이터로 활용하였다. 이후 외부표정요소를 스트립별로 나누어 변화량을 분석하였다. 분석 결과 회전각 요소 중 Omega, Phi값의 변화는 표고위치 정확도, Kappa값은 평면위치 정확도의 저하에 더욱 관련되어 있음을 입증하였다.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.121-126
• /
• 2013

Precision machine tools for high dignity cutting are needed for efforts to improve machining accuracy. However, there are many factors to improve machining accuracy. This study investigated how machining accuracy changes when variation and unbalance amount in rotational speed domain is decreased. Machining accuracy of initial machine tools depends on manufacturing and assembly of parts such as bearing. And then, vibration and noise vary with volume of unbalance amount when it is rotation, so it effects unbalance amount. Also vibration and noise increased by unbalance shorten spindle's life and it especially makes worse boring accuracy. Therefore, this study studied the change of roundness and cylindricity of workpiece when it decreases variation and unbalance in rotational speed domain.

• 대한의용생체공학회:의공학회지
• /
• 제40권2호
• /
• pp.48-54
• /
• 2019

This paper proposed a method of validation data augmentation for improving the grading accuracy of diabetic macular edema (DME) using deep learning. The data augmentation technique is basically applied in order to secure diversity of data by transforming one image to several images through random translation, rotation, scaling and reflection in preparation of input data of the deep neural network (DNN). In this paper, we apply this technique in the validation process of the trained DNN, and improve the grading accuracy by combining the classification results of the augmented images. To verify the effectiveness, 1,200 retinal images of Messidor dataset was divided into training and validation data at the ratio 7:3. By applying random augmentation to 359 validation data, $1.61{\pm}0.55%$ accuracy improvement was achieved in the case of six times augmentation (N=6). This simple method has shown that the accuracy can be improved in the N range from 2 to 6 with the correlation coefficient of 0.5667. Therefore, it is expected to help improve the diagnostic accuracy of DME with the grading information provided by the proposed DNN.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.403-408
• /
• 2008

The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch. The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply (HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1488-1490
• /
• 2008

The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch, The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply(HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

• 방송공학회논문지
• /
• 제23권2호
• /
• pp.235-245
• /
• 2018

최근 카메라의 제한된 시야각을 극복하고 여러 영상을 하나의 영상으로 정합하여 넓은 시야각을 제공하는 파노라마 영상 기술 개발에 대한 연구가 활발히 진행되고 있다. 본 논문은 파노라마 영상 제작 시 속도와 정확도 향상을 위한 전처리, 후처리 과정을 제안한다. 전처리 단계에서 카메라 센서 정보인 3차원 회전각으로 영상 간 공통 영역을 구하여 스티칭 알고리즘 소요 시간을 단축한다. 또한 후처리 단계에서 가중치를 추가한 최소 오차 경계 블랜딩 방법을 제안하여 파노라마 영상의 정확도를 향상시키고 이를 실험을 통해 결과 검증 및 비교한다

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.309-315
• /
• 2018

The purpose of this study is to assess the mechanical properties of the ceramic abutment with washer. In this study, ceramic abutment were used, tested with $30^{\circ}$ compression load, shear fatigue, adaptation accuracy test(rotation angle, contact interval), removal torque force test, torsional breaking force test. The $30^{\circ}$ compression load was 729 N, the shear fatigue load was 275 N, adaptation accuracy test of rotation angle was within $3^{\circ}$, contact interval within $10{\mu}m$, and removal torque force test value is $18.88N{\cdot}cm$, torsional breaking force test value is $35.52N{\cdot}cm$. Ceramic abutment with a washer fitted have sufficient mechanical strength and may be substituted for titanium abutment.

• 한국정보통신학회논문지
• /
• 제27권1호
• /
• pp.34-40
• /
• 2023

고객이 온라인으로 요청한 명함을 자동으로 명함을 인쇄하는 스마트 명함 인쇄 시스템이 활성화되고 있다. 이때, 문제는 고객이 시스템에 제출한 명함이 비정상일 수 있다는 것이다. 본 논문에서는 인공 지능 기술을 도입하여 명함의 이미지가 비정상적으로 회전됐는지 여부를 판정하는 문제를 다룬다. 명함은 0도, 90도, 180도, 270도 회전한다고 가정하였다. 특별한 인공신경망을 설계하지 않고 기존의 VGG, ResNet, DenseNet 인공신경망을 적용하여 실험하였는데 모든 신경망이 97% 정도의 정확도로 이미지 회전을 분별할 수 있었다. DenseNet161은 97.9%의 정확도를 보였고 ResNet34도 97.2%의 정밀도를 보였다. 이는 문제가 단순할 경우, 복잡한 인공신경망이 아니어도 충분히 좋은 결과를 낼 수 있음을 시사한다.

• 한국BIM학회 논문집
• /
• 제11권4호
• /
• pp.1-9
• /
• 2021

Comparing to general scanning data, the 3D digital map for large construction sites and complex buildings consists of millions of points. The large construction site needs to be scanned multiple times by drone photogrammetry or terrestrial laser scanner (TLS) survey. The scanned point cloud data are required to be registrated with high resolution and high point density. Unlike the registration of 2D data, the matrix of translation and rotation are used for registration of 3D point cloud data. Archiving high accuracy with 3D point cloud data is not easy due to 3D Cartesian coordinate system. Therefore, in this study, iterative closest point (ICP) registration method for improve accuracy of 3D digital map was employed by different overlap ratio on 3D digital maps. This study conducted the accuracy test using different overlap ratios of two digital maps from 10% to 100%. The results of the accuracy test presented the optimal overlap ratios for an ICP registration method on digital maps.