• The Journal of Korean Physical Therapy
• /
• 제16권3호
• /
• pp.86-96
• /
• 2004

A clinical study about painful manifestation on lumbar with regard to movement change of trunk The purpose of this study is to present the basis of low back pain therapy which is close examined of back muscle that is the main reason for that case of back pain when trunk rotation, flexion and extension. Therefore this study, which is based on literature review and clinical experience, has tried to figure out that back pain which is considered to be significant for the most increasing time, posture, motion, painful area, involved muscle have any influence on trunk rotation, flexion and extension This study has done with the patients in oriental rehabilitation clinic, K-oriental hospital, from Jan, 2003 to Dec, 2003. Total cases were 145(male:$39\%$-52 patients, female:$64.1\%$-93 patients) those who complained lumbosacral pain with radiating that makes patient unable to bending or extending the trunk. And they were surveyed retrospect way, checking the medical record and that of therapist. Results are as followings. 1. For sprain patient, $34.5\%$ complained pain on extension, and among them, the most remarkably, patients who did right rotation extension pattern were $20\%$. Herniated disc patient shows greater limit on flexion when trunk moves bending route, but right rotation with extension pattern shows the most limitation on flexion-extension according to the rotation of trunk 2. Cases of morning back pain($60.5\%$) showed high value on right rotation extension pattern($18.6\%$), right rotation flexion pattern($16.3\%$) but did not show big difference on left flexion and extension pattern 3. Patients those who complain pain on sitting position showed highest value each left, right $14.6\%$ of left and right rotation extension pattern 4. Among extension painful patient, there showed highest value of each $32.5\%$ on right rotation extension pattern, and $20.0\%$ on right rotation flexion pattern. 5. Tenderness distribution of quadratus lumborum showed $34.5\%$ on right rotation extension pattern, $20.7\%$ on left rotation extension pattern, and that of iliopsoas muscle at right rotation flexion pattern showed right muscle $20.0\%$, left $50.0\%$ Derived from the results of survey above, for sprain and HIVD patient showed greatest pain on right rotation pattern, for pain plus patient on right rotation extension among those who has extreme pain on sitting in the morning described tenderness on right quadratus lumborum, and those who complain pain on left rotation extension described tenderness on left lumborum the most Decisively, it is possible to figure out the problem muscle that involved when I found the time, position, motion that aggravating and painful area. Therefore this study would be expected to be able to be a useful clinical materials on diagnosis and therapy of low back pain.

• 응용통계연구
• /
• 제14권1호
• /
• pp.81-90
• /
• 2001

모집단의 변화를 효과적으로 추정하기 위한 반복조사 방법으로 겨체표본조사를 고려할 수 있다. 교체표본조사는 크게 일수준교체표본조사와 다수준교체표본조사로 나누어지며 모집단의 특성, 특성의 변화를 추정하기 위하여 복합추정량을 사용하고 있다. 본 논문에서는 다수준교체표본조사의 경우 교체그룹내 표본개체들의 상관관계를 고려한 일반화복합추정량과 추정량의 분산을 최소화시키는 최적계수를제시하였다. 또한 수치예에서는 교체그룹내 표본개체의 수, 교체그룹내 상관정도의 변화에 따라 표본개체들의 상관관계를 고려한 일반화 복합추정량의 효율성을 제시하였다.

• 한국조사연구학회:학술대회논문집
• /
• 한국조사연구학회 2002년도 추계학술대회 발표논문집
• /
• pp.255-274
• /
• 2002

We classify rotation sampling designs into two classes. The first class replaces sample units within the same rotation group while the second class replaces sample units between different rotation groups. The first class is specified by the three-way balanced design which is a multi-level version of previous balanced designs. We introduce an extended generalized composite estimator (EGCE) and derive its variance and mean squared error for each of the two classes of design, cooperating two types of correlations and three types of biases. Unbiased estimators are derived for difference between interview time biases, between recall time biases, and between rotation group biases. Using the variance and mean squared error, since any rotation design belongs to one of the two classes and the EGCE is a most general estimator for rotation design, we evaluate the efficiency of EGCE to simple weighted estimator and the effects of levels, design gaps, and rotation patterns on variance and mean squared error.

• 한국가시화정보학회지
• /
• 제10권3호
• /
• pp.25-29
• /
• 2012

This paper introduces a new parameter to design the $2{\times}2$ microfluidic centrifuge with single flow rotation positioned at the center of microchamber. The dimensional centrifugal acceleration momentum flux which is defined as the interfacial momentum flux divided by distance from the center of the chamber explains the flow rotation and its threshold provides a reference to expect single flow rotation. Through the numerical and experimental visualization of the flow rotation, the number and position of flow rotation in the $2{\times}2$ microfluidic centrifuge were examined. At a channel width of $50{\mu}m$ and chamber width of $250{\mu}m$, single flow rotation was obtained over at a Reynolds number of 300, while at a channel width of $100{\mu}m$ and chamber width of $500{\mu}m$, single flow rotation did not appear. The numerical analysis showed that the threshold centrifugal acceleration momentum flux to obtain single flow rotation was $3500kg/m{\cdot}s^2$.

• 대한물리의학회지
• /
• 제9권3호
• /
• pp.279-284
• /
• 2014

PURPOSE: This study intended to verify whether there was actual correlation between weight-bearing asymmetry and a limitation in hip joint rotation range in patients with low back pain. METHODS: Thirty five low back pain patients voluntarily participated this study. For each participant, hip joint medial rotation symmetry rate and the weight-bearing symmetry rate were calculated. The correlation between the two variables was investigated. RESULTS: A decrease in the left hip joint medial rotation range of motion (ROM) was observed more often than a reduction in the right hip joint medial rotation ROM. However, similar number between right and left side was observed in ground reaction force more weighted. The coefficient between the passive hip joint medial rotation symmetry rate and the weight loading symmetry ratio was -0.19 (p < 0.05). CONCLUSION: The present study demonstrated a weak correlation between the hip joint medial rotation ROM and the weight distribution of both feet. Such result suggests that careful evaluation by separating each element is needed in treating patients with low back pain. Future research should take into account asymmetric alignment and abnormal movement in different joints of the body as well as asymmetry in the bilateral hip joint rotation and the unilateral weight supporting posture.

• 정보보호학회논문지
• /
• 제26권3호
• /
• pp.623-630
• /
• 2016

이기종 기기가 상호 연결되어 통신하는 IoT 환경에서는 모든 기기가 일정한 보안 수준을 갖추어야 한다. 그러나 통신 계산 기능이 제약된 기기에서는 상대적으로 암호 알고리즘의 성능이 저하되어 최적화 또는 효율적인 구현 방법이 필요하다. 본 논문에서는 ARX 경량 블록 암호를 대상으로 레지스터를 고려한 효율적인 Rotation 구현 방법을 연구한다. 실제 기기를 이용한 성능 측정을 통해 수정된 Rotation의 효율성을 실증적으로 검증한다. 실험 결과, 수정된 Rotation이 이전보다 개선된 성능을 보여주었으며, 특히, 16비트 MSP 환경에서 실제 기기와 시뮬레이션 성능 측정 결과 사이에 유의한 차이가 있음을 발견하였다.

• 대한인간공학회지
• /
• 제32권5호
• /
• pp.459-467
• /
• 2013

Objective: The aim of this study is to review the studies on job rotation with various points of view and to classify the studies considering the approach methods. Background: Various work interventions were carried in order to prevent the work-related musculoskeletal disorders(WMSDs) and job rotation was considered as one of the simple and effective methods. Method: Previous studies were systematically collected with the combination of keywords such as job, task, rotation, allocation, line balancing, etc. Collected studies were classified into three categories: field study, laboratory study and optimization approach study. Results: Field studies showed that most studies focused on the evaluation of the factors causing the musculoskeletal disorder. Moreover, the effect of job rotation could be hard to identify because it required a long-period close observation. Laboratory studies covered only simple aspects of tasks or movements. Optimization approach studies showed the systematic approach to establish the job rotation scheme though many limitation and assumptions were adopted. Conclusion: This study collected and classified the previous studies on job rotation and presented the different approaches across various research areas. Application: The results of this study could help the practitioner and ergonomist how to establish the job rotation scheme.

• Physical Therapy Rehabilitation Science
• /
• 제8권3호
• /
• pp.152-157
• /
• 2019

Objective: We aimed to investigate differences of range of motion in measuring shoulder internal rotation (IR) and external rotation (ER) resulting from posture change in manual scapular stabilization in prone, hook-lying, sitting, and standing positions in healthy young adults. Design: Cross-sectional study. Methods: This study included healthy young adults who agreed to participate after a thorough explanation about the study purpose and methods. A clinometer was used to measure shoulder rotation. Measurements of shoulder rotation according to postural change were performed in prone, hook-lying, sitting, and standing positions. The repeated measures analysis of variance was used to compare between-group differences in postural change. Results: The lower the posture, the greater the average value of IR angle. In contrast, the higher the posture, the greater the average value of the external rotation angle. In active and passive IR with posture change, there was difference in average value but with no statistical significance. In active and passive ER, there was a statistically significant difference between prone and sitting, prone and standing, hook-lying and sitting, hook-lying and standing, and sitting and standing position (p<0.05). Conclusions: Our findings suggest that postural change should be considered in order to increase the strength or range of motion of the internal and external rotation of the patient's shoulder joint.

• Geomechanics and Engineering
• /
• 제23권6호
• /
• pp.523-533
• /
• 2020

The current study focuses on the effect of the end shape of steel pipe piles on installation effort and bearing resistance using the pressing method of installation under dense ground conditions. The effect of pile rotation on the installation effort and bearing resistance is also investigated. The model steel piles with a flat end, cone end and cutting-edge end were used in this study. The test results indicated that cone end pile with the pressing method of installation required the least installation effort (load) and showed higher ultimate resistance than flat and cutting-edge end piles. However, pressing and rotation during cutting-edge end pile installation considerably reduces the installation effort (load and torque) if pile penetration in one rotation equal to the cutting-edge depth. Inclusion of rotation during pile installation reduces the ultimate bearing resistance. However, if penetration of the cutting-edge end pile equal to the cutting-edge depth in one rotation, the reduction in ultimate resistance can be minimized. In comparing the cone and cutting-edge end piles installed with pressing and rotation, the least installation effort is observed in the cutting-edge end pile installed with penetration rate equal to the cutting-edge depth per rotation.

• 한국전문물리치료학회지
• /
• 제19권4호
• /
• pp.61-69
• /
• 2012

The purpose of this study was to identify the effects of tensor fasciae latae-iliotibial band (TFL-ITB) self-stretching exercise on the lumbopelvic movement patterns during active prone hip lateral rotation (HLR) in subjects with lumbar extension rotation syndrome accompanying TFL-ITB shortness. Eleven subjects (9 male and 2 female) were recruited for the two-week study. A three dimensional ultrasonic motion analysis system was used to measure the lumbopelvic movement patterns. The TFL-ITB length was measured using the modified Ober's test and was expressed as the hip horizontal adduction angle. The subjects were instructed how to perform TFL-ITB self-stretching exercise program at home. A paired t-test was performed to determine the significant difference in the angle of lumbopelvic rotation, movement onset time of lumbopelvic rotation, TFL-ITB length, and LBP intensity before and after the two-week period of performing the TFL-ITB self-stretching exercise. The results showed that after the intervention, the lumbopelvic rotation angle decreased significantly (p<.05), the movement onset time reduced significantly (p<.05), and LBP intensity decreased slightly but not significantly (p=.07). The hip horizontal adduction angle increased significantly (p<.05) after the intervention. These findings indicate that TFL-ITB stretching exercise increased TFL-ITB length, decreased lumbopelvic rotation angle, and delayed the movement onset time of lumbopelvic rotation after two-weeks. In conclusion, the TFL-ITB self-stretching exercise performed over a period of two weeks may be an effective approach for patients with lumbar extension rotation syndrome accompanying TFL-ITB shortness.