• Journal of Welding and Joining
• /
• v.21 no.3
• /
• pp.85-91
• /
• 2003

Narrow gap welding has many advantages over conventional V-grooved butt welding such as high productivity, small deformation and improved mechanical property of joints. With narrower groove gap, less arc heat input is expected will all the other advantages of narrow gap welding. The main defects of narrow gap welding include the lack of root fusion, convex bead surface and irregular surface, all of which have negative effects on the next welding pass. This paper suggests an up-and-down torch oscillation for ultra narrow gap welding with gap size of 5mm and investigates the proper welding conditions to fulfill the reliable and high welding quality. First, GMA welding model was suggested for ultra narrow gap welding system with Halmoy's model referenced for wire melting modeling. And the arc length in ultra narrow gap was defined. Secondly, based on the experimental results of up-and-down torch oscillation welding, phase shift of current and wire extension length were simulated for varying oscillation frequency to show that weld the bead shape in ultra narrow gap welding can be predicted. As the result, it was confirmed that reliable weld quality in ultra narrow gap welding can be achieved with up-and-down torch oscillation above 15Hz due to its ability to provide uniform heat input along the sidewall of gap.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.173-178
• /
• 1997

As one of the developmental disturbances in shape of teeth, an accessory root may involve any teeth, but has very rare frequency in the deciduous teeth. Because it is possible to diagnose the accessory root only by use of the radiographs, it is important to detect this root early by carefully examining the radiographs. The accessory root produces several problems such as abnormal exfoliation of deciduous teeth, eruption abnormality of successive permanent teeth, infection due to residual root during tooth extraction, and incomplete pulp treatment, and therefore it is necessary to have a continuous follow check-up to prevent these problems.

• Proceedings of the KWS Conference
• /
• 1998.05a
• /
• pp.227-229
• /
• 1998

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.885-901
• /
• 2021

This paper illustratesthe impact of the temporal gap between satellite images and targetsize in mesoscale atmospheric motion vector (AMV) algorithm. A test has been performed using GEO-KOMPSAT-2A (GK2A) rapid-scan data sets with a temporal gap varying between 2 and 10 minutes and a targetsize between 8×8 and 40×40. Resultsshow the variation of the number of AMVs produced, mean AMV speed, and validation scores as a function of temporal gap and target size. As a results, it was confirmed that the change in the number of vectors and the normalized root-mean squared vector difference (NRMSVD) became more pronounced when smaller targets are used. In addition, it was advantageous to use shorter temporal gap and smaller target size for the AMV calculation in the lower layer, where the average speed is low and the spatio-temporal scale of atmospheric phenomena is small. The temporal gap and the targetsize are closely related to the spatial and temporalscale of the atmospheric circulation to be observed with AMVs. Thus, selecting the target size and temporal gap for an optimum calculation of AMVsrequires considering them. This paper recommendsthat the optimized configuration to be used operationally for the near-real time analysis of mesoscale meteorological phenomena is 4-min temporal gap and 16×16 pixel target size, respectively.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.42-48
• /
• 2012

Due to increase in demand of stable and long pipelines in natural gas industry, wide range of researches are being performed on automation welding to improved welding quality with respect to weld process parameters in real time measurement. In particular, the coupling between the pipe manufacturing process and location of the weld seam, the measured size of the gap that exists in the weld position and the weld angle depending on whether the movement of molten weld. This is due to absence of controlling welding penetration position, depending on the required size of the angle of the setting. In addition, the optimum welding conditions must be considered while selecting, the correlation between these variables and the systematic correlation has not yet been identified. Therefore, in most welded pipe root-pass weld solely depends on the experience of workers in relation to secure a stable weld quality. In this study, automation welding system is implemented to select a suitable root-pass STT (Surface Tension Transfer) welding method using the optimal welding conditions. To successfully accomplish this objective, there were various welding conditions used for welding experiment to confirm that the assessment required for construction through the pipe and automatic welding process is proposed to optimize this plan.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.1
• /
• pp.28-34
• /
• 2005

We review three methods of separating soil respiration into root and soil microbial contribution: (1) component integration, (2) root exclusion, and (3) isotopic method. Among these methods, component integration and root exclusion are most commonly used. Root respiration contribution to soil respiration estimated by the root exclusion method is higher than those by other two methods. Trenching has little environmental disturbances in soil or on surface of site compared to other methods in root exclusion such as root removal and gap formation. Isotopic method has an advantage over other methods because of minimal soil and root disturbances, but this method is costly and requires techniques for the complex analysis. Trenching seems to be an appropriate in situ method for calculating component contributions to soil respiration with minimum disturbances in site. However, the method overestimates the contribution of microbial respiration because of root decay, and realistic results could be obtained by estimating root decay or avoiding large roots in trenched plots.

• Restorative Dentistry and Endodontics
• /
• v.46 no.2
• /
• pp.22.1-22.12
• /
• 2021

Objectives: This study evaluated and compared the effects of radiation therapy on the dislocation resistance of AH Plus and BioRoot RCS applied to dentin and the sealer-dentin interface. Materials and Methods: Thirty single-rooted teeth were randomly assigned to 2 groups (n = 15 each): AH Plus (Dentsply DeTrey) and BioRoot RCS (Septodont). Each group was subdivided into control and experimental groups. The experimental group was subjected to a total radiation dose of 60 Gy. The root canals of all samples were cleaned, shaped, and obturated using the single-cone technique. Dentin slices (1 mm) were sectioned from each root third for the push-out test and scanning electron microscopy (SEM) was done to examine the sealer-dentin interface. The failure mode was determined using stereomicroscopy. Bond strength data were analyzed by the independent t-test, 1-way analysis of variance, and the Tukey post hoc test (α = 0.05). Results: Significantly lower bond strength was observed in irradiated teeth than non-irradiated teeth in the AH Plus group (p < 0.05). The BioRoot RCS group showed no significant reduction in bond strength after irradiation (p > 0.05) and showed a higher post-irradiation bond strength (209.92 ± 172.26 MPa) than the AH Plus group. SEM revealed slightly larger gap-containing regions in irradiated specimens from both groups. Conclusions: The dislocation resistance of BioRoot RCS was not significantly changed by irradiation and was higher than that of AH Plus. BioRoot RCS may be the sealer of choice for root canal treatment in patients undergoing radiation therapy.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.953-966
• /
• 2022

Since aerosols adversely affect human health, such as deteriorating air quality, quantitative observation of the distribution and characteristics of aerosols is essential. Recently, satellite-based Aerosol Optical Depth (AOD) data is used in various studies as periodic and quantitative information acquisition means on the global scale, but optical sensor-based satellite AOD images are missing in some areas with cloud conditions. In this study, we produced gap-free GeoKompsat 2A (GK-2A) Advanced Meteorological Imager (AMI) AOD hourly images after generating a Random Forest based gap-filling model using grid meteorological and geographic elements as input variables. The accuracy of the model is Mean Bias Error (MBE) of -0.002 and Root Mean Square Error (RMSE) of 0.145, which is higher than the target accuracy of the original data and considering that the target object is an atmospheric variable with Correlation Coefficient (CC) of 0.714, it is a model with sufficient explanatory power. The high temporal resolution of geostationary satellites is suitable for diurnal variation observation and is an important model for other research such as input for atmospheric correction, estimation of ground PM, analysis of small fires or pollutants.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.2
• /
• pp.431-437
• /
• 2008

Sengmaek-san(Shengmai-san; SMS) is used in oriental medicine as one of the key herbal medicine for treating diverse symptoms including cardiovascular and neurological disorders. In the present study, the effects of SMS on axonal regeneration were investigated in the rat model given sciatic nerve injury. SMS treatment enhanced axonal regrowth into and the number of non-neuronal cells in the distal area after crush injury. GAP-43 protein levels were increased in the injured sciatic nerve compared to intact nerve and further upreguated by SMS treatment. GAP-43 protein was increased similarly in the dorsal root ganglion (DRG) at lumbar 4 - 6 by nerve injury and SMS treatment, suggesting GAP-43 induction at gene expression level. SMS-mediated increase in phospho-Erk1/2 protein was observed in the DRG as well as in the injured nerve implying its retrograde transport into the cell body as the process of lesion signal transmission. The present findings suggest that SMS may be involved in enhanced axonal regeneration via dynamic regulation of regeneration-associated proteins.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.747-752
• /
• 2007

This study was carried out to identify and quantify the flavonoids from 6 different plant parts of Allium victorialis var. platyphyllum (AVP), including the flower, leaf, root, stem, flower stalk, and flower seed, using liquid chromatography/ mass spectrometry. Two major flavonoids were structurally identified as quercetin (3,5,7,3'4,'-pentahydroxyflavone) and kaempferol (3,5,7,4'-tetrahydroxyflavone) at contents of 11.8-25.8 and $6.0-64.4\;{\mu}g/mL$, respectively. In particular, the flower and root plant parts contained the highest amounts of quercetin and kaempferol compared to the other parts. We also assessed the recovery effects of each plant-part extract of AVP on gap junctional intercellular communication (GJIC) in WB-F344 cells by the scrape-loading and dye transfer (SL/DT) method. According to the results, GJIC was reduced by approximately 70.2% ($62.3{\pm}12.5$ cells) compared to the control ($209{\pm}9.5$ cells, 100%) when 12-O-tetradecanoylphorbol-13-acetate (TPA) was treated alone in the WB-F344 rat liver epithelial cells. However, the stem extract (0.2 mg/mL) restored GJIC to basal levels (92%, $204{\pm}2.3$ cells, p<0.01) and the flower extract (0.2 mg/mL) stimulated GJIC to 82.5% ($172.6{\pm}8.3$ cells, p<0.05), when applied together with the TPA.