• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.45-51
• /
• 1982

An endodontically treated tooth is likely to be brittle than a vital tooth. Internal structure of the tooth has been weakened due to a significant removal of dentin by coronal access, canal preparation. There are many controversies concerning with various methods of reinforcing an intact anterior tooth that has endodontic treatment. In this experiment, 128 extracted maxillary anterior teeth were endodontically treated, and prepared with 4 methods of restorations; Composite resin filling with zinc phosphate cement, composite resin filling without zinc phosphate cement, composite resin filling with post, and metal crown with post. An Instron testing machine was used to measure the fracture loads of the specimens. The means of the failure loads for the 4 groups were compared by F-test statistically and the failure modes were observed. The results were as follows; 1. There were no statistically significant difference between the failure loads of the four methods of restoration. 2. Teeth without post were fractured in a horizontal or oblique plane through upper or middle third of the root. 3. In the posted teeth, fractures were occurred around the post. 4. In the metal crowned teeth with post, the fracture were occurred around the post or coronal area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.333-340
• /
• 2010

This paper presents the distributions of the tensile and fracture properties of an alloy 82/182 dissimilar weld joint between an SA508 Gr.3 nozzle and F316L SS safe-end at ambient temperature. Tensile and J-R tests were conducted using specimens extracted from base metals, heat-affected zones (HAZs), buttering regions, and various regions of the weld metal. The results show that the root region of the weld has higher strength than the upper region. The yield and tensile strengths vary considerably within the root region of the weld. The buttering region had the lowest strengths. The strengths gradually increased as the F316L stainless steel weld boundary was approached. The variation of the strengths within the upper region of the weld is insignificant. The fracture toughness of the alloy 82/182 weld metal is less than those of both the base metals and both HAZs. Within the alloy 82/182 weld, the center of weld has a slightly lower fracture toughness than the weld boundary and buttering region, and the root region has greater toughness than the upper region of the weld.

• Corrosion Science and Technology
• /
• v.7 no.2
• /
• pp.77-84
• /
• 2008

Based upon the good compatibility to neutron irradiation and high temperature water environment, austenitic stainless steels are widely used for core internal structural materials of light water reactors. But, recently, intergranular cracking was detected in the stainless steels for the core applications in some commercial PWR plants. Authors studied on the root cause of the intergranular cracking and developed the countermeasure including the alternative materials for these core applications. The intergranular cracking in these core applications are defined as an irradiation assisted mechanical cracking and irradiation assisted stress corrosion cracking. In this paper, the root cause of the intergranular cracking and its countermeasure are summarized and discussed.

• The Journal of the Korean dental association
• /
• v.56 no.10
• /
• pp.572-580
• /
• 2018

Adequate access cavity is the key to achieving endodontic success. The aims of the access cavity can be considered as follows: 1) Creation of a smooth unimpeded pathway for instruments to canal orifices 2) Removal of the entire roof of the pulp chamber in order to inspect the pulp floor, 3) Preservation of natural tooth substance consistent with the above. Recently, contracted endodontic cavities based on minimally invasive endodontics has introduced. This has the benefit of preserving the pericervical dentin more than traditional access cavity with achieving long-term success. However, some studies reported controversial results regarding root canal detection, instrumentation efficacy (noninstrumented canal area, hard tissue debris accumulation, canal transportation, and centering ratio) as well as fracture resistance. Therefore, further studies are required for accepting contracted access cavity, and modified form of traditional and contracted access cavity could be considered.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.4
• /
• pp.13-21
• /
• 1987

4-4 품질관리 품질관리에는 세가지의 중요한 스텝이 있다. 첫째는 소요자재의 관리, 두째는 공장에서 조립할때의 관리, 세째는 출고관리이다. 특수 파괴설계방법론을 이 모든 과정들에 적용시켜야 할 것이다. 4-4-1 수입자재의 품질 자재들을 매입 혹은 수입할 경우에 검사하여야 할 여러가지 가 있다. 1 재료를 매입할 때 성질들이 얼마나 균일한가\ulcorner 2 최소 인성치는 얼마로 보증되어 있는가\ulcorner 3 재료들을 선별하여 거절하느나, 수락하느냐를 결정하기 위하여 어떠한 비파괴 검사법을 사용하느나\ulcorner 수입재료들에 대해서 파괴측정 시험을 해보면 실험방법이나 재료종류들에 관련되어서 실험데이타들에 전형적인 산포현상이 나타나게 마련이다. 예를들어보면 항복응력이 1400Mpa인 퀘칭하여 켐퍼링한 강의 공칭 파괴인성치는 $_{4}$는 90Mpa .root. m 일 수도 있고 60Mpa .root. m일 수도 있다. 아래 그림에 이 현상을 예시하였다. 파괴문제가 중요시 되는 부품에 대해서는 특수하게 파괴인성치를 규정하여 재료를 구입하여야 한다.

• 열병합발전
• /
• s.30
• /
• pp.21-25
• /
• 2002

According to recent Korea Electric Power Company report, yearly distribution line brass cramp bolts failure summed up to 4,400 cases emerging as one of main local break-down causes. Naturally, the need for the investigation was proposed To determine the root cause of the cramp bolt failures, mechanical and metallurgical investigation were performed for 90 samples which collected from various sites. For the understanding of the geometric characteristics, stress distribution was evaluated by CAE program and proof load of each bolts was tested. The SEM&EDS was used for metallurgical investigation. Through the investigation, the root causes of failures were confirmed. All damaged bolts showed intergrannular fracture mode and the all fractured bolt showed ß phase morphology contrast to the a&ß mixture morphology of the non-damaged samples. Additionally, EDS analysis confirmed the existence of lead rich layer on grain boundaries.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.45-50
• /
• 2010

Most of joining processes for machine and steel structure are performed by butt and fillet welding. The mechanical properties and fatigue strength of their welding zone can be effected largely by the differential of generated heat and changes of grain size according to thickness of material and number of passes in welding process. In this study, it was investigated about characteristics of fatigue failure according to thickness of material and number of passes in cruciform fillet weld zone as the basic study for safe and economic design of welding structures. Fracture modes in cruciform fillet weld zone are classified into toe failure and root failure according to non-penetrated depth. It can be accomplished economic design of welding structures considering fatigue strength when the penetrated depth in fillet weld zone is controled properly.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.601-601
• /
• 1989

The behavior of fatigue was studied by using low carbon steel bar with microhole(artificial small defect) under the condition of rotary bending stress which is made artificially at smooth surface and round notch root. The results obtained can be summerized; The behavior of non-propagating cracks which are produced at both tips of small defect occurred to dissymmetry, and it is found to be double size of small defect. For the range of l>lc, threshold stress intensity is constant. However, for the range of l

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.101-107
• /
• 1989

The behavior of fatigue was studied by using low carbon steel bar with microhole(artificial small defect) under the condition of rotary bending stress which is made artificially at smooth surface and round notch root. The results obtained can be summerized; The behavior of non-propagating cracks which are produced at both tips of small defect occurred to dissymmetry, and it is found to be double size of small defect. For the range of l>lc, threshold stress intensity is constant. However, for the range of l

• The Journal of the Korean dental association
• /
• v.20 no.11 s.162
• /
• pp.929-932
• /
• 1982

Calcium Hydoxide는 치수복(pulp capping), 생활치수절단술(vital pulpotomy)등에서 bactericidal effect 때문에 많은 사용을 하고 있으며, 최근에는 무수치(pulpless teeth)와 관련된 치근단병소가 있는 경우, 미완성치근단인 경우, 치근흡수, 횡주치근파절(Transverse root fracture)등의 경우에서도 Ca(OH)₂paste를 사용하여 성공적인 근관치료를 할 수 있다. 근관의 instrumentation 과 irrigation후 근과 dressing 은 약 1주일간 행하고 Ca(OH)₂paste를 건조된 근관내에 넣는다. 이때 치근단(root apex)으로부터 약 3~5mm 되게 저속으로 아주 가볍고 부드러운 압력을 가하여 Ca(OH)₂paste를 cotton pellet로 밀어넣고 Sealing(가봉)한다. 이 Temporary sealing은 1개월이상 견딜수 있도록 Cement 또는 Amalgam filling 함이 좋다. Ca(OH)₂paste의 제법은 normal irrigating agents 와 minimal filing으로 시행한다.