• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.359-366
• /
• 1990

This study was carried out to investigate rooting rate, plagiotrophic growth and root-promoting effect of IBA in Taxus cuspidata S, et Z. cuttings. The results obtained were summarized as follows ; 1. As the ortet ages of cuttings were increased in 5, 10, to 20 years, the rooting rates were decreased in order of 85.7%, 81.7% and 62.4%, and the number of primary roots were also decreased in 5.3, 3.7 and 2.9, respectively. 2. Rooting rate by cutting types of lateral shoot were higher than those of main shoot type, significant at the 1% level. 3. IBA(l00ppm) treatment promoted the rooting rates and the number of primary roots. 4. As the ortet ages were increased in 5, 10 to 20 years, angles of central shoot of rooted cuttings which mesured cyclophysis were decreased in order of $75.9^{\circ}$, $68.5^{\circ}$ and $59.6^{\circ}$, respectively, significant at the 1% level. 5. Average angles showed $77.0^{\circ}$ for main shoot cutting, $65.9^{\circ}$ for upper lateral shoot and $61.7^{\circ}$ for lower lateral, which was significant at 1% level, and lateral shoot cutting showed more topophysis than main shoot cutting. 6. Shoot length of rooted cuttings from main shoot cutting was longer than that from lateral shoot significant at the 1% level. 7. Relationship between some characteristics showed highly positive correlation.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.219-230
• /
• 2020

This study was conducted to determine the optimum medium and humidification period for the strawberry (Fragaria × ananassa Duch. cv. Maehyang) cutting seedling production. The cuttings were planted in coir (CO), rockwool (RW), phenolic foam (PF), and organic foam medium (OFM) with fogging treatment in 0, 3, 6, 9, or 12 days on February, 2019. And, as the field verification examination research, cuttings were planted in CO, RW, PF, and OFM, with misting treatment in 0, 6, 9, 12, or 15 days on June, 2019. In fogging treatments, rooting and survival rates of seedlings tended to increase with longer fogging periods, and rooting and survival rates were showed significantly higher in CO medium with more than 9 days of fogging periods. In misting treatments, rooting rate was significantly higher in CO and RW medium with more than 9 days of misting periods, and survival rate was significantly higher with more than 12 days of misting periods. There was no significantly difference by growth medium and humidification period in shoot and root growth. Therefore, when considering the rooting and survival rate the CO medium with 9 days of humidification period could be beneficial for the production of the 'Maehyang' strawberry cutting seedlings.

• Journal of Plant Biology
• /
• v.7 no.2
• /
• pp.9-13
• /
• 1964

As to the up-lnd bamboos, I have reported, in my previous works, that Korea has two species in the genus of Pseudosasa, four in Pleioblastus, and other four in Sasa. In the present work, I dealt with Sasamorpha Purpurascens Nakai var. Borealis Nakai which proved the strongest vitality of all up-land bamboo yet found in various up-lands of Korea, and which might be most important from the utility view-point. This report is chiefly on its procreation. Sasamorpha Purpurascens Nakai var. Borealis Nakai can be found almost everywhere throughout the country, and its leaves and stems are much used in farms in various forms of manufacture. It is also welcomed as the feed for livestocks and as cover plants for aforestation, especially as the excellent means of errosion control on devastated hill sides. It is also widely accepted that it will provide, in the immediate future, abundant sources for the up-land bamboo pulp. As the first phase of my research plan on the subject, I undertook to determine the possible best way of its procreation, for which were included the experiments of inducing the growth of subterranean stems, the entire stand cutting, transplanting, reclaimed planting after burning etc. in order to observe the plant elongation, growing conditon, climatical effect etc. What has been fuond out so far given here as follows: 1) Of the various sections of the country, Mt. Odae area gives out the most excellent Sasamorpha Purpurascens Nakai var. Borealis Nakai(the leaf weight of which is 450 gr.) and Taekwanryong area comes the next class. This species can be transplanted anywhere in the South Korea. 2) The elongation of S.P. Nakai var. Borelais begins at around the middle of May and almost completely stops by the 20th of August. 3) The best studied transplanting season is supposed to be Feb. -April, for those transplanted during that period proved 100% of success. The next best transplanting season may be October. Rain fall does not have so much effect on transplanting as the growing season does. 4) In inducing the subterranean stems, the growing season can be ignored. The root expnsion is most animated during the months of April-June, the most active season for water absorption. Those stems induced during the winter proves more rapid growth. 5) The entire stand cutting shows greater growth than the reclaimed planting after burning and that, the growth is most vigorous during May-July, whereas during the hottest months of Aug-Sept. the growth shows only 5 cm. The new shoots grow slower both in the field of entire stand cutting and in the field of reclaimed planting after burning than in the otherwise fields.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.105-115
• /
• 2000

This study was conducted to test a hypothesis that sensitivity of trees to ozone exposure was related to their growth rates. Two cultivars of Populus alba ${\times}$ P. glandulosa with different genetic growth potential were used for the comparison. Two clones(72-30, 72-16) of cultivar No. 4 with fast growing potential and three clones(71-28, 72-27, 72-19) of cultivar No. 2 with slow growing potential were propagated in early spring by cutting in $2-{\ell}$ plastic pots. They were grown outdoor for 5 months and exposed in late August for 30 days to 70 and 130ppb ozone in a open-top chambers(2.5m in diameter and 2m in height). Ozone concentration in a control chamber was maintained below 30ppb by filtering with activated charcoal. Each treatment was replicated twenty times. In a control chamber, cultivar No. 4 grew 73%, 64%, and 38% faster than cultivar No. 2 in leaf weight, root weight, and total dry weight, respectively. Visible injury was observed only in cultivar No. 4 in 130ppb treatment. Ozone treatment at both 70 and 130ppb decreased height growth, dry weight of leaf, root, and entire plants in all five clones. Particularly root growth was reduced by 39.7% and 13.8% in cultivar No. 4 and No. 2, respectively, in 70ppb treatment. Consequently, shoot/root ratio of cultivar No.4 was increased by 63.4%, while that of cultivar No.2 was increased by 22.1%. Stomatal conductance decreased more in cultivar No.4 than in cultivar No.2. Net photosynthesis of cultivar No.4 at 130ppb ozone decreased by 69.5%, while that of cultivar No.2 decreased by 31.5%. Above mentioned physiological responses of two cultivars to ozone strongly suggested that fast growing cultivar No.4 was more sensitive to ozone than slow growing cultivar No.2. It was concluded that sensitivity of trees to ozone exposure was closely related to their growth rates.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.74-79
• /
• 2012

It depends on the joint configuration, dimensions and constraints of the joint whether the residual stress at the root of single-sided butt weld is tensile or not. Therefore, recommendation is generally made that high R ratio should be used in the fatigue test of welded joint in order to prevent excessively long life caused by compressive residual stress. In this research, the residual stress profile in butt weld joint was obtained through compliance method, using successive extension of a slot and measurement of the variation of strain during the slot extension. The residual stress profile was firstly assumed to be the linear summation of Legendre polynomials up to 9th order excluding 0th and 1st order. Strain variation on the surface was measured while the slot was being extended by cutting to find out the 8 unknown coefficients of each polynomial term. The cut was made by the electric discharge machine. It was concluded that the residual stress near the surface is positive valued, however, it turned into the negative value as soon as it passed through 2 or 3 mm of the depth.

• Preventive Nutrition and Food Science
• /
• v.2 no.4
• /
• pp.328-332
• /
• 1997

The ripe fruit of Hass avocado contains one of the highest elvels of cytochrome P-450 protein found in the plant kingdom. To determine whether wounded roots of avocado contain P-450 protein, the roots of avocado were wounded by slicing, and then allowed to incubate in sealed plastic bags, in 0.4M mannitol, and in the solution to make protoplast preparation containing cellulysin and macerase during the specified times. The microsomal proteins were extracted from the samples, separated by SDS-PAGE, and then subjected to Western blot analysis using polyclonal antibodies which are generated against the CYP71A1 protein. wounded roots in sealed bags produced CYP71A1 within 6 hours after cutting, and those in 0.4M mannitol did not produce CYP71A1 even after 72 hours, but those in the protoplast preparation by cellulysin and macerase induced and produced CYP71A was induced in only 24 hours. These results indicate that CYP 71A1 plays a role for wound healing for root tissue o avocado, and would-inducible P-450 protein was not detected in the mannitol solution by preventing a synthesis of ethylene in a liquid state, but the softening of tissues by cellulysin and macerase to make protoplast preparation was involved in an activation of CYP 71A1 even in the liquid state.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.719-725
• /
• 2004

Mesquite or Vilayati babul (Prosopis juliflora) is a drought resistant, evergreen, spiny tree with drooping branches and a deep laterally spreading root system. It grows in semi-arid and arid tracts of tropical and sub-tropical regions of the world and is spreading because the leaves are unpalatable and animals do not digest its seed. The mesquite has become a major nuisance; cutting or pruning its branches to form a canopy would provide shade for travelers, aid harvesting of pods, as well as make available wood for fuel. An average plant starts fruiting by 3-4 years of age and yields annually 10-50 kg pods/ tree, which can be collected from May-June and September-October. Availability of pods worldwide is estimated to be about 2-4 million metric tonnes. Ripe pods are highly palatable; on dry matter basis they contain 12% crude protein, 15% free sugar, a moderate level of digestible crude protein (7% DCP) with a high level of energy (75% TDN). The pods contain low tannin levels below those toxic to animals. Seeds contain 31-37% protein; pods should be finely ground before feeding to facilitate utilization of the seeds. Mesquite pods could replace costlier feed ingredients such as grain and bran contributing 10-50% of the diet. Phosphorus supplements need to be added when mesquite pod, exceeds 20% of animals' diet.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.40-44
• /
• 2004

This study was conducted to solve the problem of spinach harvesting done by manpower at the outdoor field during the cold winter season. Prototype spinach harvester was designed to dig, pick-up, and collect in a continuous operation for harvesting outdoor field-planted crawling type spinach. In the field test, two types of blades (Type A : angle of $150^{\circ}$, Type B : straight) were used for measuring the cutting loads of spinach and chain conveyor with lugs was used for picking up the root cut spinach. Prototype's vibrating blade reduced the digging power of the fixed blade by $46\%$. The loss was also very little ($0.7\%$) with a digging depth of 4 cm, an oscillation frequency of 748 rpm, and an oscillation distance of 33 mm. The working performance of the prototype spinach harvester was 38 hour/ha resulting to $96\%$ labor cost reduction compared to the conventional harvesting.

• Transactions of Materials Processing
• /
• v.26 no.3
• /
• pp.156-161
• /
• 2017

In this study, the reason of die fracture occurring in hot forging of an aluminum fixed scroll was studied, based on experiments and finite element predictions. The material is assumed to be rigid-viscoplastic, and the die is rigid for the finite element predictions. The stress in the tension at the wrap root is known to cause brittle fracture, and the increase in the tensile stress is owing to the unbalanced filling of material into the die cavities between both sides of the warp. Based on the empirical and numerical achievements, the effects of geometrical parameters of the material on the die fracture were examined to find practical measures for elongated die life. It has been shown from the parametric study that the material with the optimized trapezoidal cross-section, which can be easily made during cutting or the optimized cylindrical billet with its eccentric placement in the die cavity, can considerably reduce the magnitude of the tensile stress around the die corner fractured, indicating that economical manufacturing with reduced number of stages and elongated die life can be realized at once using the optimized practical initial material.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.315-323
• /
• 2015

The weld scallop has been used for joining T-bars. There are a lot of weld scallops in shipbuilding. It is difficult to perform scallop welding due to the inconvenient welding position. This results in many problems such as porosity, slag inclusion, etc. In this study, a new method is devised to remove weld scallops by incorporating a Ceramic Backing Material (CBM). The weld scallop is removed by an elongation of the v groove. In order to insert a CBM into the groove without a weld scallop, a wedge-shaped CBM is developed. The top side of the developed CBM is similar to the shape of a general back bead. The bottom surface has a saw-toothed shape for cutting at a suitable length. This can be attached to the root side of a face plate using adhesive tape, just like a general CBM. Welding experiments in normal and abnormal conditions are carried out and the possibility of burn-through is examined. This CBM's applicability to shipbuilding is verified.