• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.155-165
• /
• 1996

Growth of $LiNbO_3$ single crystal by Czochralski method was carried out to study the piezoelectric effects. Piezoelectric coefficients and elastic compliances of the $LiNbO_3$ single crystal were determined by the resonance method of length-extentional mode of bar resonator from the room temperature up to $100^{\circ}C$. Two dielectric constants of $LiNbO_3$ were also determined by measuring the capacitance of the plate specimen. Measured constants were piezoelectric coefficients $d_{15},d_{22},d_{31},d_{33}$ elastic compliances $s^E_{11},s^E_{33},2s^E_{13}+2s^E_{44},s^E_{14}$ and dielectric constants $K^T_{11},K^T_{33}$. As temperature increased, elastic compliances changed very slowly while piezoelectric coeffiecients and dielectric constant $K^T_{33}$ changed very rapidly. Electromechanical coupling constant of zyw ($45^{\circ}C$)-bar was as high as 0.51 in room temperature and nearly constant up to $1000^{\circ}C$. The increase of piezoelectric coefficients was mainly due to the increase of dielectric permittivity.

• Journal of Power System Engineering
• /
• v.2 no.3
• /
• pp.27-33
• /
• 1998

The room temperature and air conditioning load in the underground space have been investigated numerically by the unsteady heat conduction equation. The model room has 3 m in height and 10 m in width, and it's position in the underground depth are 0.5 m to 5 m. When the room was located around surface, the room temperatures were strongly influenced by the atmosphere. But the underground depth is more than 2 m, the yearly temperature amplitude was small and the temperature phase was delayed. Up to 5 m of the depth, the cooling and heating load was decreased rapidly, but over 10 m of the depth, the air conditioning load was constant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.399-402
• /
• 2000

For improvement of B constant in $CaMnO_3$-$CaTiO_3$ perovskite type thermistors, effect of $Cr_2$$O_3$ addition ranged from 0.0wt% to 5.0wt% on electrical properties were investigated with contents and sintering temperatures in the view of crystal and microstructures. The solubility limit of Cr$_2$O$_3$was up to 0.5wt% judging from the result of lattice parameter. The grain size was decreased and the resistance at room temperature and B constant were increased with the addition of $Cr_2$$O_3$.On particular, B constant of$CaMnO_{3-x}$$Cr_2$$O_3$ system was increased greatly from 1574k to 2598k at 0.5wt% $Cr_2$$O_3$addition. Further addition of $Cr_2$$O_3$, however, resulted in the decrease of the resistance and B constant due to the $Cr_2$$O_3$ precipitation on the grain boundary. As the$CaTiO_3$contents increased in the $CaMnO_3$-$CaTiO_3$ system, the resistance at room temperature and B constant were highly changed.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.329-337
• /
• 1991

The Ni-MgO composites were prepared by coprecipitation of NiO-MgO solid solutions and their selective reduction in a hydrogen atmosphere. We report on the measurements of both ac conductivity $\sigma$ ($\omega$, f) and dielectric constant $textsc{k}$'($\omega$, f) for the Ni-MgO composites in the frequency range from 10 Hz to 10 MHz at room temperature. The frequency exponents of conductivity and dielectric constant, x and y, are found to be x=0.98$\pm$0.05 and y=0.05$\pm$0.01. These results are in good agreement with a general scaling relation $\chi$-y=1, although these values are different from the theoretical predications. The dielectric constant exponent ($textsc{k}$' f-fc -s) is found to be s=0.62$\pm$0.07 with estimated percolation threshold fc=0.20$\pm$0.02.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1249-1255
• /
• 2006

This paper presents a constant power control logic for perfect starting a microtubine in vehicle. Under extremely low temperature, performance of the start-up system is severely dropped than that of room temperature because of increasing of load of mechanical parts including engine core and drop of the lead-acid battery capacity. Unfortunately, performance drop of lead-acid battery makes severe problems that cause a malfunction of fuel and lubrication system and power fail of digital devices. So we propose the new start-up logic by constant output power control of lead-acid battery using PWM inverter controller for preventing above problems and keeping good performance of start-up system for microturbine. Also, we prove usefulness of new start-up logic through experimental results under $-32^{\circ}C$ ambient temperature.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.10
• /
• pp.960-967
• /
• 2010

The sound field can be classified to the direct, diffract and reverberant sound field. If the sound absorption material in a room is not applied sufficiently, the reverberant sound field increases and the sound pressure in a room also increases when the sound source exists in a room. Therefore, the reverberation time should be controled in order to reduce the reverberant sound as well as sound pressure level in a room. Even though the reverberation time is specified and researched widely in architectural engineering, it is rarely performed in a marine engineering. Therefore, in this research, the reverberation time in a navel vessel is researched related to the noise reduction in a cabin.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.23-23
• /
• 2010

The $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMNO)-Bi composite films sandwiched by an $Al_2O_3$ protection layer exhibited a linear increase of a dielectric constant with increasing thickness and the 1000nm-thick BMNO-Bi composite films showed a dielectric constant (~220) higher than that of its bulk material (~210), keeping a low leakage current density of about $0.1{\mu}A/cm^2$. An enhancement of the dielectric constant in the BMNO-Bi composite films was attributed to the hybrid model combined by a space charge polarization, dipolar response, and nano-capacitors. On the other hand, 1000nm-thick BMNO-Bi composite films sandwiched by 40nm-thick BMNO layer exhibited a dielectric constant of about 450 at 100 kHz and a leakage current density of $0.1{\mu}A/cm^2$ at 6V.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.224-227
• /
• 2015

Ferroelectric $Pb_2(Sc,Nb)O_6$ were prepared under two different sintering conditions using the oxide mixing method and the electrical properties were measured. The sintering conditions were $1350^{\circ}C$ for 25 minutes and $1400^{\circ}C$ for 20 minutes. EDX spectroscopy and XRD were used to determine the crystalline characteristic of the $Pb_2(Sc,Nb)O_6$ compositions Pyrochlore phase showed about 2% in all $Pb_2(Sc,Nb)O_6$ specimens. It expands the growth of crystals in samples sintered at $1400^{\circ}C$ than $1350^{\circ}C$, but all samples were the optimal crystallization. The temperature and frequency dependence of the complex dielectric constant and admittance were measured to analyze the electrical properties. The high dielectric constant of the specimens reflects the good stoichiometry and crystallization. The maximum value of the dielectric constant in the two specimens treated with sintering at $1350^{\circ}C$ and $1400^{\circ}C$ were more than 27,000, and the dielectric loss at room temperature is smaller than 0.05. The maximum dielectric constant decreased with increasing frequency, the transition temperature also increased in $Pb_2(Sc,Nb)O_6$ compositions. The admittance and susceptance values reach a peak at all temperatures, and the magnitude of the peak increases with increasing measuring temperature. Strong frequency dependent of maximum admittance, susceptance, dielectric constant and dielectric loss were observed.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.363-366
• /
• 2004

PZT thin films were formed by rf-magnetron sputtering on $Pt/Ti/SiO_2/Si$ substrate. Bulk PZT target containing $5\%$ excess PbO was used. They were formed with in-situ process at $650^{\circ}C$ as total thickness of 175 and 250 nm after the depositing of thin PZT films at room temperature, i. e. 2-step Sputtering. It was found that the ferroelectric perovskite phase is formed at $650^{\circ}C$ by XRD and the interface between room temp.-layer and $650^{\circ}C$ -layer is not existent. In the samples undergoing 2-step sputtering the dielectric constant was 600 or more and the leakage current density was $2{\times}10^{-7}A/cm^2$. So, we found that the room temp.-layer on the bottom electrode stabilize the underlaid layers.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.460-467
• /
• 2010

In housing units constructed recently in Korea, the length of ondol coil is different in each room, so the flow rate of hot water is adjusted by setting valve opening. If the flow rate is not appropriate for heating load, the room temperature seriously deviates from the set temperature range for comfort. In particular, too small valve opening can induce a noise by cavitation. In order to adjust the valve opening, two methods by zone area and a new method by return temperature rise were modelled and simulated using TRNSYS and EES. As a result, heating energy consumption during one week was the same on three methods, but the room temperature of the new method minimally deviated from the range of set temperature with a low possibility of noise.