• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.221-227
• /
• 2005

Aim of this study is to investigate an aerodynamic effect of a drag-reducing device on a heavy-duty truck. The vehicle experiences two different kinds of aerodynamic forces such as drag and uplifting force (or downward force) as it is traveling straight forward at constant speed. The drag force on a vehicle may cause an increase of the rate of fuel consumption and driving instability. The rolling resistance of the vehicle may be increased as result of the negative uplifting or downward force on the vehicle. A device named roof-fairing system has been applied to examine the reduction of aerodynamic drag force on a heavy-duty truck. As for a engineering design information, the drag-reducing system should be studied theoretically and experimentally for the best efficiency of the device. Four different types of roof-fairing model were considered in this study to investigate the aerodynamic effect on a model truck. The drag and downward force generated by vehicle has been obtained from numerical calculation conducted in this study. The forces produced on four fairing models considered in this study has been compared each other to evaluate the best fairing model in terms of aerodynamic performance. The result shows that the roof-fairing mounted truck has bigger negative uplifting or downward force than that of non-mounted truck in all speed ranges, and drag force on roof-fairing mounted truck has smaller than that of non-mounted truck. The drag coefficient $(C_D)$ of the roof-fairing mounted truck (Model-3) is reduced up to $41.3\%$ than that of non-mounted trucks (Model-1). A downward force generated by a roof-fairing mounted on a truck is linearly proportional to the rolling resistance force. Therefore, the negative lifting force on a heavy-duty truck is another important factor in aerodynamic design parameter and should be considered in the design of a drag-reducing device of a tractor-trailer. According to the numerical result obtained from present study, the drag force produced by the model-3 has the smallest of all in all speed ranges and has reasonable downward force. The smaller drag force on model-3 with 2/3h in height may results of smallest thickness of boundary layer generated on the topside of the container and the lowest intensity of turbulent kinetic energy occurs at the rear side of the container.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2016년)
• /
• pp.90-95
• /
• 2016

본 연구에서는 교육 및 연구를 위한 CFD 해석 프로그램인 EDISON_CFD 프로그램을 이용하여 화물 트럭의 후면부 형상변화에 따른 공력특성을 분석해보았다. 먼저 추가적인 부착물을 장착하지 않은 기본적인 형상의 화물트럭의 공력특성을 확인 후, 후면부에 여러 형상의 Boat tail(보트 테일)과 전면부에 Cap-roof fairing(캡루프 페어링)이 부착된 형상을 해석하여 트럭이 받는 항력 감소를 통해 최적형상을 찾아가는 연구를 수행하였다. Cap-roof fairing이 부착된 형상에서 $15^{\circ}$의 특성길이가 0.3인 Boat tail에서 가장 좋은 항력 감소 효과를 얻을 수 있었다. Cap-roof fairing의 경우 6%의 항력 계수 감소를 보였고, Boat tail에서 20%의 항력 계수 감소효과를 관찰할 수 있었다. Boat tail의 각도와 길이를 변수로 하여 여러 해석을 진행한 결과 최적화된 형상을 선정할 수 있었다.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.194-201
• /
• 2006

Roof-fairing and deflector system have been used on heavy-duty trucks to minimize aerodynamic drag force not only for driving stability of the truck but also for energy saving by reducing the required driving power of the vehicle. In this study, a numerical simulation was carried out to see aerodynamic effect of the drag reducing device on the model vehicle. Drag and lift force generated on the five different models of the drag reducing system were calculated and compared them each other to see which type of device is efficient on the reduction of driving power of the vehicles quantitatively. An experiment has been done to see airflow characteristics on the model vehicles. Airflow patterns around the model vehicles were visualized by smoke generation method to compare the complexity of airflow around drag reducing device. From the results, the deflector systems(Model 5,6) were revealed as a better device for reduction of aerodynamic drag than the roof-fairing systems(Model 2,3,4) on the heavy-duty truck and it can be expected that over 10% of brake power of an engine can be saved on a tractor-trailer by the aerodynamic drag reducing device at normal speed range($80km/h{\sim}$).

• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.85-88
• /
• 2012

루프 페어링은 화물차의 주행저항 및 유도항력을 줄이기 위해 설치되는 장치 중 하나이다. 이 장치는 화물차의 지붕 윗부분에 설치하여 화물차가 받는 항력을 줄이는데 사용이 된다. 이번 과제에서는 루프 페어링의 효과에 대해 유체역학적인 증명 및 확인을 위해 루프 페어링의 설치 전-후 트럭의 형상에 따른 유동의 변화와 항력계수의 값을 EDISON CFD를 사용하여 구한 후 각각 비교 하였다. 이를 위해 EDISON CFD의 압력 contour와 stream line, 정압계수(Cp)그래프를 통해 트럭의 주행 중 발생하는 박리현상을 가시적으로 확인하였고, 항력계수(Cd)값을 비교하는 것을 통해 루프 페어링을 설치한 경우가 미설치된 경우보다 주행 시 더욱 유리하다는 것으로 결론을 내렸다.

• 한국가시화정보학회지
• /
• 제13권1호
• /
• pp.9-14
• /
• 2015

There have been many attempts to reduce the cost of transportation. Especially, drag reduction of heavy vehicles has enormous influence on energy saving by reducing the driving power of the vehicles. In this study, the effects of drag-reducing additive devices such as side skirt, boat tail and cab-roof fairing on the drag reduction of a 5 ton truck model were experimentally investigated. The aerodynamic performance of these flow-control devices attached to heavy vehicle was evaluated through wind tunnel test. In addition, flow patterns around the truck model were visualized by using smoke tube method. The drag coefficient is reduced by up to 5.7%, 7.16% and 22.2% by the side skirt, boat tail and cab-roof fairing, respectively. The interactive effect of the side skirt and boat tail was also investigated.

• 항공우주시스템공학회지
• /
• 제16권2호
• /
• pp.25-32
• /
• 2022

캡 루프 페어링은 상용차가 주행 시 전면부에서 발생하는 유동 박리의 저항을 제어하여 상용차 항력 계수를 줄이는 장치이다. 상용차는 구조적으로 후방의 컨테이너를 적재해야 되기 때문에 차량의 주행방향으로부터 공기역학적 저항력을 피할 수 없게 설계되어 있다. 이러한 이유 때문에 유류비, 환경오염물질과 밀접한 연관을 가진다. 본 연구에서는 랭킨 반체 이론을 바탕으로 3D 페어링 형상을 설계하고 공력 해석을 통해 설계 결과를 검증하였다.

• 항공우주시스템공학회지
• /
• 제16권6호
• /
• pp.64-73
• /
• 2022

페어링은 상용차가 주행 시 전면부에서 발생하는 유동박리의 저항을 제어하여 상용차 공기 저항력을 감소시키는 장치이다. 본 연구에서는 랭킨 반체 이론을 적용하여 3D페어링 형상을 설계하고 공력 해석을 통해 설계 결과를 검증하였다. 그리고 페어링의 구조적 안전성을 위해 상용차 과속조건과 돌풍 조건을 함께 고려하여 공력하중을 도출하였다. 이러한 공력 해석 결과를 기반으로 유리섬유/에폭시 복합재료를 적용하여 안전계수 3을 만족하는 페어링 구조 설계를 수행하였다. 최종 본 연구에서 가장 경량화된 페어링의 구조 해석을 수행하여 구조 안전성이 확인되었다.

• 한국가시화정보학회지
• /
• 제21권2호
• /
• pp.8-13
• /
• 2023

The primary challenge in improving fuel efficiency and reducing air pollution for commercial vehicles is reducing their aerodynamic drag. Various flow control devices, such as cab-roof fairing, gap fairing, cab extender, and side skirt have been introduced to reduce drag, however, the drag reduction effect and applicability are different depending on each commercial vehicle model. To evaluate the fuel consumption of heavy vehicles, a comprehensive research approach, including drag force measurement, flow field analysis is required. This study investigated the effect of a cab extender, which installed rear region of cab, on a drag coefficient of commercial vehicle through wind tunnel experiments and CFD. The results showed that the cab extender significantly modified the flow structure around the vehicle, leading to 8.2% reduction in drag coefficient compared to the original vehicle model. These results would provide practical application for enhancing the aerodynamic performance and fuel efficiency of heavy vehicle.