• Journal of Microbiology
• /
• 제41권4호
• /
• pp.345-348
• /
• 2003

The bio-mediated production of calcite crystals by calcinogenic bacteria has great applicable value for the restoration of deteriorated calcareous monuments, because of its high purity and coherency. An investigation of the conditions for calcite production by an alkalophilic Bacillus amyloliquefaciens CMB01 strain was made. Optimal calcite precipitation occurred when the bacterium was cultured at pH 8.0 and 30$^{\circ}C$, and in B4 medium that consisted of 0.4% yeast extract, 0.5% glucose, and 1.5% calcium acetate. Calcium ion of the bacterially induced calcite was analyzed by an inductively coupled plasma (ICP) spectrophotometer. Optical and scanning electron microscopy (SEM) of the calcite revealed a typical rombohedral polycrystalline structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.764-767
• /
• 2004

This study was to measure the minuteness structure, dielectric properties of (0.3-x)PMN - XPSS-0.7PZT+0.5wt%NiO+0.5wt%$MnO_2$(x=0.05, 0.10, 0.15, 0.20, 0.25)ceramics according to sintering temperature and PSS moi percentage after manufacturing the specimens with a general method. the results of this study were gotten such as follows. The crystal structure of ceramic has the rombohedral structure in XRD. it appeared that addition of Ni, Mn additive was helpful to the formation of stable structure. Dielectric constant at $20^{\circ}C$ showed its maximum value 890.001 in specimens sintered at $1000^{\circ}C$, x=0.15mol. and dielectric loss showed its minimum value 6.95[%] in specimens sintered at $1000^{\circ}$, x=0.05mol. The variation rate of dielectric constant according to the change of frequency was decreased by increasing frequency, The variation rate of dielectric constant according to the change of temperature was increased by increasing temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.51-53
• /
• 2005

This study was to measure the minuteness structure, dielectric properties of 0.03PCW-0.07PNN-0.9PZT ceramics according to sintering temperature manufacture the specimens with a general method. The results of this study were gotten such as follows. The crystal structure of ceramic changed the rombohedral structure into teteragonal structure according to rising sintering temperature in XRD. Dielectric constant at $20^{\circ}C$ showed its maximum value 510.599 in specimens sintered at $1100^{\circ}C$ and dielectric loss showed its minimum value 7.43% in specimens sintered at $1100^{\circ}C$. The variation rate of dielectric constant according to the change of frequency showed its minimum value 0.029/kHz at $1100^{\circ}C$. The variation rate of dielectric constant according to the change of temperature showed its minimum value $1.40/^{\circ}C$ at $1500^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.806-808
• /
• 2001

In this thesis, specimens was manufactured in general method annexing PMB-PZT system ceramic, and the following conclusion has been deduced. In XRD, the crystal structure of ceramic has the tetragonal structure which is close to rombohedral structure, and consequently the specimen characterized by MPB was manufactured. According to dopping with xPMB, electromechanical factor(kp) little is changed. kp was maximum value 23.37[%] at xPMB 0.03[mol%]. mechanical quality factor(Qm) was maximum value 237.04 at xPMB 0.03[mo1%].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.578-580
• /
• 2002

In this thesis, specimens was manufactured in general method annexing PMB-PZT system ceramic, and the following conclusion has been deduced. In XRD, the crystal structure of ceramic has the tetragonal structure which is close to rombohedral structure, and consequently the specimen characterized by MPB was manufactured. According to dopping with xPMB, electromechanical factor(kp) little is changed. kp was maximum value 23.37[%] at xPMB 0.03[mol%]. mechanical quality factor(Qm) was maximum value 237,04 at xPMB 0.03[mol%].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1524-1526
• /
• 2001

In this thesis, specimens was manufactured in general method annexing PMB-PZT system ceramic, and the following conclusion has been deduced. In XRD, the crystal structure of ceramic has the tetragonal structure which is close to rombohedral structure, and consequently the specimen characterized by MPB was manufactured. According to dopping with xPMB, the dielectric constant at 20[$^{\circ}C$] reduced on the whole, dielectric constant was maximum value $8.0{\times}10^2$ at xPMB 0.01[mol%]. Dielectric loss was maximum value 4.1[%] at xPMB 0.01[mol%].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.650-652
• /
• 2002

In this paper, specimens was manufactured in general method annexing PAN-PZT+0.8wt%Mn+1wt% Nb ceramics doped by Sr(0.0 ~ 1.2 wt%). and the following conclusion has been deduced. In XRD, the crystal structure of ceramic has the rombohedral structure and consequently the specimen characterized by MPB was manufactured. According to dopping with Sr, electromechanical factor(kp) little is changed. kp was maximum value 31.31[%] at Sr 1.2[wt%]. mechanical quality factor(Qm) was maximum value 371.879 at Sr 0.6[wt%].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1624-1626
• /
• 2004

This study was to measure the minuteness structure, piezoelectric properties of (0.3-x)PMN- xPSS -0.7PZT+0.5[wt%]NiO+0.5(wt%)$MnO_2$ (x=0.05, 0.10, 0.15, 0.20, 0.25)ceramics according to sintering temp- erature and PSS(mol%) after manufacturing the specimens with a general method. the results of this study were gotten such as follows. The crystal structure of ceramic has the rombohedral structure in XRD. It appeared that addition of Ni, Mn additive was helpful to the formation of stable structure. The electrome- chanical coupling coefficient(kp) showed good properites on the whole, showed its maximum value 25.94[%] in specimens sintered at 1100[$^{\circ}C$], x=0.25mol. The mechanical quality coefficient(Qm) showed its maximum value 272.42 in specimens sintered at 1150[$^{\circ}C$], x=0.05mol. and was decreased by increasing PSS[mol%] The temperature coefficient of the resonant frequency(TCFr) showed stable properties in all sintering temperature with x=0.05mol. Especially good stability of 0.0054[%/$^{\circ}C$] showed in specimens sintered at 1100$^{\circ}C$, x=0.05mol.

• 한국자기학회지
• /
• 제12권1호
• /
• pp.14-19
• /
• 2002

CMR 자성물질인 LSMO 페롭스카이트 망간산화물에 $^{57}$ Fe를 미량 치환한 L $a_{0.67}$S $r_{0.33}$M $n_{0.99}$$^{57}$ F $e_{0.01}$ $O_3$물질에 대하여 그 결정학적 및 자기적 특성을 x-선 회절 실험, 진동시료 자화율 측정 실험, 자기저항 실험, Mossbauer 분광 실험을 통하여 연구하였다. 물을 용매로 한 sol-gel법을 이용하여 단일상의 polycrystalline L $a_{0.67}$S $r_{0.33}$M $n_{0.99}$$^{57}$ F $e_{0.01}$ $O_3$분말시료를 합성하였으며, 결정구조는 격자 상수 $a_{0}$ =5.480 $\AA$, $\alpha$=60.259$^{\circ}$를 갖는 rhombohedral구조로 분석되었다. 상온에서의 magnetic moment 값은 60.15 emu/g임을 알 수 있었고 큐리온도( $T_{c}$)는 375 K로 결정하였다. Mossbauer 스펙트럼은 20-400 K 영역에서 측정되었으며, 온도증가에 따라 관측되는 비대칭적 선폭증가는 이방성 초미세자기장 요동 모델로 설명할 수 있었다. 이 때 이방성 초미세 자기장이 + $H_{0}$ 및 - $H_{0}$ 로 진동하는 시간 비율은 $P_{+}$= 0.80 및 $P_{-}$= 0.20으로 분석되었다. 이방성 초미세자기장 요동 진동수로부터 온도변화에 따른 이방성 에너지를 계산하였으며, 150 K에서 124.01 erg/$cm^3$로 최대값을 갖음을 알 수 있었다.다.었다.었다.다.었다.

• 한국자기학회지
• /
• 제14권5호
• /
• pp.169-173
• /
• 2004

$\alpha$-F $e_2$ $O_3$, 나노 입자를 균일한 크기로 제조하여 Morin 전이 온도( $T_{M}$)를 전 후로 스핀의 변화에 관하여 연구하였다. X-선 회절 분석과 입도분포 측정을 통하여 입자는 80nm정도의 매우 군일한 크기 분포를 하고 있음을 확인하였다. Mossbauer 분광기를 통하여 4.2K에서부터 실내온도까지 여러 온도 범위에 걸쳐 측정한 결과 입자의 크기에 따라 $T_{M}$온도가 변화되었고 스핀의 상태 역시 달라졌다. $T_{M}$은 $b_{ulk}$상태에서 265 K의 값을 가지고 있으나 입자의 크기가 작아질수록 낮아지고, 임계 크기 이하에서는 전이가 전혀 일어나지 않는다. 80nm크기의 입자에서, 스핀의 방향은 $T_{M}$ 이상의 온도에서는 정상적으로 hexagonal구조의 c축에 90$^{\circ}$ 이루고 있으나 $T_{M}$ 이하의 온도에서는 c 축에 나란하지 않고 일정한 각(28$^{\circ}$～29$^{\circ}$)을 유지하는데, 이 방향은 rhombohedral구조의 [110]에 해당하는 것으로 지금까지 알려진 0$^{\circ}$와 90$^{\circ}$사이의 스핀 전이와는 다른 모습을 보여주고 있다.