• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1508-1516
• /
• 2003

In numerical analysis for hydroforming process, the stress calculation is effected by flow stress which is general obtained by stress-strain relationship from uni-axial tension test, so the result of the analysis, especially in tube hydroforming, has limitation of accuracy, tubes are made in roll-forming process and become work-hardened. Then roll forming process causes material properties between rolling direction and circumstantial direction of the tube to be different. So it is difficult to predict material behavior in the process condition of bi-axial stress state. In this study, the flow stress of the tube is determined by inverse engineering approach and bulge test that is widely used for formability test in the condition of bi-axial stress. And Hill's quadratic yield function and flow rule are used to consider the anisotropy of the tube in the roll forming process.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.39-45
• /
• 1982

A floating rig, which has been used to develop the ocean resources has a common characteristics with the catamaran ship that it is composed of the two simple hulls. So the motion responses of the floating rig can be predicted theoretically with the aid of the strip method as those of the catamaran. And for the strip method, the two-dimensional hydrodynamic coefficients are the most important inputs to predict the results accurately. In this report, a theoretical method is proposed for calculating two-dimensional hydrodynamic forces and moments acting upon arbitrary shaped twin-hull cylinders, which are forced to make a heaving, swaying and rolling oscillation about their mean position on the free surface of a finite depth water. The theoretical results by making use of the singularity distribution method are presented. The accuracy of the coefficients was confirmed to be reasonable by the comparison with the Ohkusu's results for two circular cylinders in an infinite depth water. The depth effects on two-dimensional hydrodynamic coefficients for two circular cylinders are also checked. In some range of wave numbers, large differences in the behavior of hydrodynamic coefficients between for a finite depth and for an infinite depth are shown.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.499-503
• /
• 2009

In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated from an electrical response point of view. To analysis power line disturbance by induced contact loss phenomenon for high speed operation, a hardware Simulator which considered contact loss between contact wire and the pantograph as well as contact wire deviation is developed. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system. One of the most important needs accompanied by increasing the speed of high-speed train is reduced that an arc phenomenon by loss of contact brings out EMI. In case of a high-speed train using electrical power, as comparison with diesel rolling stock, PLD(Power Line Disturbance) such as harmonic, transient voltage and current, EMI, dummy signal injection etc usually occurs. Throughout experiment, it is verified that an arc phenomenon is brought out for simulator operation and consequently conducted noise is flowed in electric circuit by power line disturbance.

• 소성∙가공
• /
• 제30권6호
• /
• pp.301-305
• /
• 2021

The role of Nb addition in the tension and corrosion responses of ferrite-based stainless-steel sheets processed by cold-rolling and annealing treatment at 1173 °K was studied to evaluate the possibility for commercialization. For this purpose, the grain sizes in the samples with and without Nb content were controlled to be reasonably identical by utilizing different heat treatments within the specific range for 60 seconds. The corrosion properties of both samples were evaluated based on the analysis of polarization curves. Room-temperature tension testing showed that the strength of the sample with Nb was much higher than that without Nb whereas the elongation of the sample with Nb was slightly lower than that without Nb. The polarization curves revealed that the addition of Nb contributed to the significant improvement in protective capabilities. We thought that such combinational behavior was mainly due to the formation of niobium carbides found in the ferritic matrix.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.784-789
• /
• 2018

Accurate aerodynamic characterization of projectile is crucial for successful development of munition. The aerodynamic characterization of fin stabilized projectile is more difficult than characterization of traditional symmetric ballistic projectile. Instrumented free flight experiments were conducted to quantify rolling behavior of fin stabilized projectile. The instrumented projectiles were launched from a rifled tube and the onboard sensor data were acquired through a telemetry transmitter. Roll rate was measured for fin stabilized projectile by means of an angular rate sensor. And, roll damping coefficients were estimated from onboard sensor data acquired during gun firing and trajectory analysis of mathematical model.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1413-1420
• /
• 2012

철도차량의 동적 거동 및 안정성 등을 예측하고 물리적인 특성을 이해하기 위하여 철도선진국인 영국, 프랑스, 일본 등에서는 축소모델 제작 및 시험하는 방법과 컴퓨터 시뮬레이션을 통하여 해석적으로 접근하는 방법이 사용되고 있다. 실물 규모의 동특성 시험은 대규모의 시험설비 구축에 따른 많은 비용과 시간의 소요, 그리고 시험 환경 설정의 어려움 등의 문제점이 발생하게 된다. 이러한 단점들을 극복하고자 상사법칙을 적용한 축소대차 모델을 이용하여 동적 시험 및 컴퓨터 시뮬레이션을 통한 해석적 연구를 수행하고 있다. 본 연구에서는 소형탈선시뮬레이터를 이용한 1/5 축소대차의 주행안정성 시험에서 신뢰성이 검증된 해석모델을 이용하여 주행안정성에 미치는 매개변수 중 주행속도, 차체 하중의 2가지 변수에 따른 1/5 축소대차의 주행안정성 해석을 수행하고, 그에 따른 동적특성을 검토하였다.

• 치위생과학회지
• /
• 제18권2호
• /
• pp.105-112
• /
• 2018

The purpose of this study was to focus on the number of brushing strokes among the performance factors and identify if the 10 times stroke of the rolling method is rational. Moreover, we evaluated the changes in oral health knowledge, perception, and behavior after our rolling method instruction. The 10-stroke method of toothbrushing has been regarded as an effective method of removal of dental plaque, although there is little evidence to support this claim. We allocated 40 healthy subjects to two intervention groups. During five visits, we measured a score for dental plaque removal and instructed the subjects on a toothbrushing technique with 5 or 10 strokes per section. At the initial and final visits, subjects completed a questionnaire on one designed specifically for this study about oral health knowledge, perceptions, and behaviors. Repeated measures analysis of variance was used to compare the dental plaque removal score between the groups, and the changes in scores within each group over time. We also compared changes in mean scores in oral health knowledge, perceptions and behaviors before and after toothbrushing instruction. We found that the score for dental plaque removal increased with each additional toothbrushing instruction in both groups (p<0.001). However, we found no differences in the dental plaque removal scores between the 5-stroke and 10-stroke groups (p=0.399). The levels of oral health knowledge, perceptions and behaviors increased after the toothbrushing instructions in both groups. Our findings suggest that there is no advantage in emphasizing the 10-stroke method of toothbrushing in an oral health education program.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.617-623
• /
• 2020

다수의 승객을 운송하는 도시철도 전동차는 도시 철도교통시스템의 핵심이다. 따라서 차량의 동적성능이 확보가 차량 안전 확보 및 승객서비스 차원에서 선행되어야 한다. 철도차량의 진동, 승차감과 같은 동적거동은 현가시스템 구조 및 현가요소에 따라 크게 영향을 받는다. 철도차량의 현가시스템은 윤축과 대차간 1차현가시스템, 대차와 차체간 2차현가시스템으로 구성되어 있다. 본 논문에서는 국내에서 운용되고 있는 전동차 현가구조에 따른 전동차의 동적거동에 대하여 분석하고자 한다. 현가구조가 상이한 2종류의 전동차에 대하여 실제 선로에서 동일 주행조건으로 주행시험을 수행하였으며 차량의 진동을 계측하였고 진동과 승차감, 진동감쇠율과 같은 동적거동 특성을 분석하였다. 시험결과, 차체 진동성능은 좌우방향은 B대차가, 상하방향은 A대차가 상대적으로 우수하게 나타났다. 승차감은 전반적으로 A대차가 B대차에 비하여 우수하게 나타났다. 진동감쇠율을 보면, 1차현가시스템은 고무스프링이 적용된 A대차에 비하여 코일스프링이 적용된 B대차의 진동감쇠 성능이 우수하며 2차현가시스템은 코일스프링에 비하여 공기스프링이 적용된 A대차의 진동감쇠 성능이 우수하다. 본 논문의 결과는 향후 철도차량 신차 설계 과정에서 현가구조 설계 및 현가요소 선정 시, 유용한 자료로 활용될 것이라 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.680-689
• /
• 2011

A dynamic analysis procedure is developed to provide a comprehensive estimation of the dynamic response spectrum for locomotive's wheels running over a Pre-Stressed Concrete (PSC) box girder bridge on the Korea high speed railway. The wheel force spectrum with the bridge behavior are analyzed as the dynamic procedure for various running speeds (50~450km/h). The high-speed railway locomotive (KTX) is used as 38-degree of freedom system. Three displacements(vertical, lateral, and longitudinal) and three rotational components (pitching, rolling, and yawing). For one car-body and two bogies as well as five movements except pitching rotation components for four wheel axes forces are considered in the 38-degree of freedom model. Three dimensional frame element is used to model of the PSC box girder bridges, simply supported span length of 40m. The irregulation of rail-way is derived using the exponential spectrum density function under assumption of twelve level tracks conditions based on the normal probability procedure. The dynamic responses of bridge passing through the railway locomotive with high-speed analyzed by Newmark-${\beta}$ method and Runge-Kutta method are compared and contrasted considering the developed models of bridge, track and locomotive comprehensively. The dynamic analyses of wheel forces by Runge-Kutta method which are able to analyze the forces with high frequency running on the bridge and ground rail-way are conducted. Additionally, wheel forces spectrum and three rotational components of vehicle body for three typical running speeds is also presented.

• 한국주조공학회지
• /
• 제36권3호
• /
• pp.81-87
• /
• 2016

In this study, the effect of scrap ratio on the mechanical properties of Zr alloys was studied. Oxygen content in the ingot cake increased rapidly with increasing fraction of scrap, which can be attributed to the surface oxide of scrap including small pieces of turning, chips, etc. Iron content did not increase much with the increasing addition of scrap, suggesting scrap materials was well reserved in the iron-free container. As-cast structure of Zr alloy with the scrap:sponge ratio displayed plate/or needle ${\alpha}$ phase and no appreciable change of the cast structure was observed with change of scrap fraction. The strength increases with increasing fraction of scrap, which can be attributed to the increase of oxygen content. The ductility decreased slightly with increase of scrap fraction. Dislocation-oxygen interaction is known to increase the strength at the expense of ductility. Ingot cake with intentionally added $Fe_2O_3$ exhibited the drastic decrease of the formability, even exhibited the brittle fracture behavior during rolling. The oxidation resistance, however, increased with the increase of scrap fraction because of high oxygen content, which may prevent more penetration and diffusion of oxygen into matrix.