• Journal of Pharmaceutical Investigation
• /
• 제22권4호
• /
• pp.307-315
• /
• 1992

Dissolution rate of practically insoluble mefenamic acid was improved by roll mixing with sodium lauryl sulfate (SLS) or polyvinylpyrrolidone (PVP). The dissolution rate of the drug roll mixtures with SLS was superior to that of roll mixtures with PVP. The maximal dissolution rate was found in the roll mixtures system with SLS content of 60%. The dissolution rate of mefenamic acid roll mixtures with SLS content of 60% reached to the maximum value after 10 min of roll mixing. The transport of roll mixtures with SLS across rat jejunum was studied by the perfusion method using everted rat jejunum in vitro. The absorption rate of roll mixtures was superior to that of mefanamic acid.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.689-694
• /
• 2008

This paper proposes a roll rate estimation method for spinning vehicles. The carrier phase and frequency variations caused by spinning of vehicles are observed and the roll rate estimator is designed on the observation. The roll rate estimator consists of phase detector and zero crossing counter. The phase detector computes phase variation using in-phase and quadrature value from the correlator. By using zero crossing counter, the roll rate can be estimated since the output of phase detector is changed in proportion to the roll rate. Experiment a results show that estimated roll rate error is smaller than 0.0578Hz.

• 한국항공우주학회지
• /
• 제38권9호
• /
• pp.849-855
• /
• 2010

본 논문은 자유회전 테일핀을 갖는 커나드 유도 미사일에 대해 Falanga의 회전율 계산식을 자유회전 테일핀에 적용하여 자유회전 테일핀의 roll lock-in 현상을 예측하였다. 예측 결과의 정확도를 확인하기 위하여 Blair의 풍동시험 결과와 비교하여 검증하였다. 자유회전 테일핀의 회전율 계산 시에 필요한 테일핀의 롤링 모멘트는 풍동시험 결과를 이용하였고 롤 댐핑 모멘트는 missile DATCOM을 이용하여 계산하였다. 이를 자유회전 테일핀의 회전율 계산식에 대입하여 자유회전 테일핀의 회전율 및 Roll lock-in 현상을 예측하였으며 풍동시험 결과와 비교하였다. 검증결과, 자유회전 테일핀의 회전율 및 Roll lock-in 현상 예측 결과가 풍동시험 결과와 잘 일치하는 것을 확인 할 수 있었다.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.139-145
• /
• 2014

Nowadays, most micro-patterns are manufactured during flow line production. However, a conventional rotary chemical mechanical polishing (CMP) system has a limited throughput for the fabrication of large and flexible electronics. To overcome this problem, we propose a novel linear roll-CMP system for the planarization of large-area electronics. In this paper, we present a statistical analysis on the linear roll-CMP process of copper-clad laminate (CCL) to determine the impacts of process parameters on the material removal rate (MRR) and its non-uniformity (NU). In the linear roll-CMP process, process parameters such as the slurry flow rate, roll speed, table feed rate, and down force affect the MRR and NU. To determine the polishing characteristics of roll-CMP, we use Taguchi's orthogonal array L16 (44) for the experimental design and F-values obtained by the analysis of variance (ANOVA). We investigate the signal-to-noise (S/N) ratio to identify the prominent control parameters. The "higher is better" for the MRR and "lower is better" for the NU were selected for obtaining optimum CMP performance characteristics. The experimental and statistical results indicate that the down force and roll speed mainly affect the MRR and the down force and table feed rate determine the NU in the linear roll-CMP process. However, over 186.3 N of down force deteriorates the NU because of the bending of substrate. Roll speed has little relationship to the NU and the table feed rate does not impact on the MRR. This study provides information on the design parameter of roll-CMP machine and process optimization.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.207-215
• /
• 2000

This study theoretically investigated the roll-off cleanliness operation to eliminate the built-in contaminants which are primarily the result of manufacturing and assembly procedures first. A rigorous analytical examination of the cleaning process associated with hydraulic systems was performed by developing the general filtration process equations. The sloughing process by which built-in contaminant is entrained in the system fluid was examined during the development of a general analytical expression for sloughing rate. This sloughing rate expression in conjunction with the filtration process equations have lead to a relationship rate expression in conjunction with the filtration process equations have lead to a relationship which describes the flushing and clean-up operation for the hydraulic systems. The effects of the primary roll-off cleanliness factors was discussed and illustrated on the figures. Then, the analytical results was shown to be usefully applied into the design of roll-off flushing equipment for the hydraulic system of a tractor.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.95-98
• /
• 2008

In the present work, cross-roil rolling was rallied out using a rolling mill in which the roll axes are tilted by $5^{\circ},\;7.5^{\circ},\;10^{\circ}$ towards the transverse direction of the roiled sample. The evolution of strain states during cross-roll rolling was investigated by three-dimensional finite element method (FEM) simulation. Parallel to cross-roll rolling, normal-rolling using a conventional rolling mill was also carried out in the same rolling condition for clarifying the effect of cross-roll rolling. It turned out that three shear rate components were all introduced to the rolled sample by the cross-roll rolling process, while only one shear rate component operated during normal-rolling.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.404-407
• /
• 2008

In the present work, cross-roll rolling was carried out using a rolling mill in which the roll axis is tilted by $7.5^{\circ}$ towards the transverse direction of the rolled sample. The evolution of strain states during cross-roll rolling was investigated by three-dimensional finite element method (FEM) simulation. Parallel to cross-roll rolling, normal-rolling using a conventional rolling mill was also carried out in the same rolling condition for clarifying the effect of cross-roll rolling. It turned out that three shear rate components were all introduced to the rolled sample by the cross-roll rolling process, while only one shear rate component operated during normal-rolling.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.14-25
• /
• 2012

Recently, the application and installation of the pod propeller to the cruise ship is dramatically increased. It is because pod propulsion system allows a lot of flexibility in design of the internal arrangement of a ship. To reflect this trend, many researches have conducted to use the pod propeller for the roll stabilization of a ship. In the paper, a roll stabilization controller is designed by using fins and pod propellers as the control actuators for cruise ships. Two kinds of control algorithms are adopted for the roll control system; LQR (Linear Quadratic Regulator) algorithm and frequency-weighted LQR algorithm. Through the numerical simulation, the effect of the turning rate of the pod propeller on the roll control system is analyzed. Analysis of the simulation results indicated that the turning rate of the pod propellers is one of the important parameters which give the significant effects on the roll stabilization.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.109-118
• /
• 2016

The present paper proposes a method that can estimate a roll rate of spinning vehicles utilizing GPS receivers. The proposed method analyzes a relation between received signal and correlation value and utilizes a phenomenon that received signal power that changes according to a signal incident direction affects a correlation value. That is, a roll-rate estimation method using zero crossing detection method for correlation value, which has sinusoidal periodicity according to rotations of vehicles, is proposed. A correlation value in real environments experiences a jitter so that the proposed method includes a pre-processing filter and detection threshold setting way is also considered to reduce the effect of received signal power. In order to verify the operation of the proposed method and analyze the performance, a signal generator and software-defined receiver (SDR) are designed. The signal generator generates intermediate frequency (IF) signal by taking the rotation of vehicles, antenna gain, and signal power into consideration, and a correlation value is acquired by taking the generated IF signals into consideration. Using the generated correlation value, the operation of the proposed roll rate estimation method is verified and the performance is analyzed.

• 한국항공우주학회지
• /
• 제43권2호
• /
• pp.133-140
• /
• 2015

본 논문에서는 단일 저가형 범용 GPS 수신기와 롤 축 각속도계를 이용하여 롤 회전 비행체의 롤 자세각을 결정하는 기법을 제안한다. 비행체에 부착된 GPS 수신기의 신호 수신강도는 GPS안테나가 향하는 방향과 비행체의 종축이 이루는 평면 내에 GPS위성이 존재할 때 최대가 된다. 비행체의 종축이 속도벡터와 일치한다고 가정하면, 비행체에 대한 GPS위성의 상대위치벡터를 이용하여 GPS 안테나 신호가 최대일 때의 롤 각을 결정할 수 있다. 롤 각 결정의 정밀도를 높이기 위해 롤 축 각속도계를 이용한 칼만필터를 구성하였다. 6-자유도 시뮬레이션을 통해 제안된 방법의 성능을 검증하였다.