• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.11-23
• /
• 2006

This study was carried out to propose low types of green speed expectation models for fast putting green management by changing mowing height($4.0{\sim}2.5$ mm) and timing of rolling, dew removal and dew removal+rolling. Ball roll distance data were taken from the creeping bentgrass(Agrostis palustris Huds. 'Penncross') practice green of east course at the Lakeside C.C. in October 18, 2001 and May 25, 2002. Data were subjected to multi-regression analysis using Statistical Package for the Social Science. Among four types of green speed expectation models, the best multiple-regression equation for fast green management was as follows; $Y_4=4.171-0.225{\cdot}X_1-0.038{\cdot}X_2$ (where, $Y_4$ : green speed(m) after single dew removal+single rolling, $X_1$ : mowing height($4.0{\sim}2.5,\;X_2$ : passage of time ($0{\sim}8$ h.)). The equation[single dew removal by using sponge roller $\rightarrow$ single mowing at 3.0 mm height or less $\rightarrow$ single rolling] explained to provide fast green over 3.2 m (Stimpmeter readings required for USGA championship play) until the end of first round. Therefore, this cultural practice system was believed to provide fast putting green condition for professional golf tournament

• Journal of Drive and Control
• /
• v.12 no.4
• /
• pp.60-70
• /
• 2015

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements for farm work. However, when the tractor carries material using the bucket attached to the FEL on a sloping ground, the materials can spill or roll back over the operator due to the tilted body, thereby requiring the bucket surface to remain level at a constant value regardless of varying slopes. In this study, an active system for controlling the angle of the FEL bucket on a tractor based on the real-time measurement of ground slopes was developed to enable the bucket to constantly remain level. A FEL simulator operated based on an electro hydraulic proportional valve (EHPV) was constructed in the laboratory to develop a proportional-integral-derivative (PID) controller forming a virtual electronic control unit (ECU) on the computer, which could automatically adjust the bucket angles depending on varying input angles while sending SAE-J1939 associated messages via CAN BUS to the EHPV. The different parameter values for the PID controller due to the gravity effect of the bucket were determined using a manual PID tuning method while assuming that the tractor travels on either an ascending slope or a descending slope. The developed PID control-based self-leveling system showed a mean of steady-state errors of within $1^{\circ}$ and a mean of delayed times of ~ 0.8s when the step input of $+20^{\circ}$ was given, implying that the developed system and control algorithm would be effective in maintaining the bucket angle at a certain value. Future studies include the improvement of the control algorithm to reduce such a time delay as well as the application of the developed algorithm to the FEL mounted on a tractor tested at a testing ground.

• Journal of Trauma and Injury
• /
• v.23 no.2
• /
• pp.128-133
• /
• 2010

Purpose: All-terrain vehicle (ATV)-related injuries have increased since the introduction of ATVs to Korea. The purpose of this study is to compare patients with ATV-related injuries (PATV) to patients with motorcycle (MC)-related injuries (PMC). Methods: We retrospectively analyzed the clinical records of PATV and PMC who visited an emergency center in 2008. The cases of PMC were 164, and those of PATV were 52. Results: While PMC are seen evenly in the first half year and the second half year, PATV are seen mainly the first half year (from March to June: 73%). For PMC the most frequent injury mechanism was collision with another vehicle, while for PATV, it was side overturn/roll over. The injury severity score (ISS), the revised trauma score (RTS), the trauma score and the injury severity score (TRISS) were $5.6{\pm}5.6$, $7.7{\pm}0.7$, $5.0{\pm}2.1$ for PMC and $7.1{\pm}7.5$, $7.7{\pm}1.1$, $5.5{\pm}1.5$ for PATV, respectively. The most common injury sites were the lower extremities for PMC and the face for PATV. The rates of admission, surgery and the length of hospital stay were similar between PMC and PATV. Conclusion: This study shows that the risk of ATV accidents is similar to that of MC accidents. We recommend that the same safety standards and regulations that are applied to MCs should be used for ATVs. Safe and enjoyable paths have to be sought for drivers of ATVs.

• Journal of Biomedical Engineering Research
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2013

Persons with sensorineural hearing impairment have troubles in hearing at noisy environments because of their deteriorated hearing levels and low-spectral resolution of the auditory system and therefore, they use hearing aids to compensate weakened hearing abilities. Various algorithms for hearing loss compensation and environmental noise reduction have been implemented in the hearing aid; however, the performance of these algorithms vary in accordance with external sound situations and therefore, it is important to tune the operation of the hearing aid appropriately in accordance with a wide variety of sound situations. In this study, a sound classification algorithm that can be applied to the hearing aid was suggested. The proposed algorithm can classify the different types of speech situations into four categories: 1) speech-only, 2) noise-only, 3) speech-in-noise, and 4) music-only. The proposed classification algorithm consists of two sub-parts: a feature extractor and a speech situation classifier. The former extracts seven characteristic features - short time energy and zero crossing rate in the time domain; spectral centroid, spectral flux and spectral roll-off in the frequency domain; mel frequency cepstral coefficients and power values of mel bands - from the recent input signals of two microphones, and the latter classifies the current speech situation. The experimental results showed that the proposed algorithm could classify the kinds of speech situations with an accuracy of over 94.4%. Based on these results, we believe that the proposed algorithm can be applied to the hearing aid to improve speech intelligibility in noisy environments.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.67-84
• /
• 2002

A shallow high-resolution seismic reflection survey was carried out at the Mineopo tidal flat on the western coast of Korea. The purpose of the survey was to investigate shallow sedimentary structure of the tidal (fat associated with the recent sea level change. A total of 795 shots were generated at 1 m interval from a 5-kg hammer source and recorded on 48 channels of 100 Hz geophones along two mutually perpendicular profiles. The water-saturated ground condition resulted in suppressed ground rolls by significantly decreasing rigidity. In addition, seismic velocities over 1500 m/s provided easy segregation of reflected arrivals from lower velocity noise. As a consequence, seismic sections were created that are high in resolution and signal to noise ratio as well. The stack sections show that the tidal flat consists of 5 sedimentary sequences above acoustic basement. Although deposition is largely characterized by the transgressive sedimentary facies resulting from sea level rise, erosional surfaces are well-resolved within the sequences.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7329-7334
• /
• 2015

This is to analyze of driver behavioral and the accident characteristics in rollover. The study period was January 2011 to May 2014 and the subject of study was 102 person who were drivers visited the emergency room. Research tool includes a damage information of the vehicle, accident mechanism, damage to the patient clinical information with the injury data from the ROAD Traffic Authority. For data analysis, SPSS 18.0 was used for t-test, ANOVA and Chi-square test. Injury Severity Score average score according to the vehicle type is 6.00 points in the smaller vehicle, at high vehicle 11.78 points, from the other vehicle that showed 14.70 points. Significant differences between the three groups did not show (P=.267). Men did not use a seat belt significantly compared to women(P=.007). Vehicle type and weather, this was no correlation with whether or not use the seat belt(P=.755, P=.793). But showed a tendency to smaller size vehicles drivers do not use a seat belt, the weather could see a little more inclined to use a seat belt rather than a sunny day. Finally, in rollover accidents as in other types of accident it was confirmed that the seat belt has a great influence on the damage.

• Journal of Platform Technology
• /
• v.10 no.2
• /
• pp.10-19
• /
• 2022

Moving assistant devices for people who are difficult to move are becoming electric-powered and automated. These moving assistant devices are not suitable for moving stairs at which the height between floor surfaces is different because these devices are designed and manufactured for flatland moving. An electric-powered and automated moving assistant device should change direction or stop when it approaches stairs in a movement direction. If the user or automatic control system does not change direction or stop in time, a moving assistant device can roll over or collide with stairs. In this paper, we propose a stairs detection method by using oblique distance measured by one sensor tilted to flatland. The method proposed in this paper can detect upward or downward stairs by using a difference between a predicted and measured oblique distance in considering a tilted angle of a sensor for measuring an oblique distance and installation height of the sensor on a moving object. Before the device enters a stairs region, if our proposed method provides information about detected stairs to a device's controller, the controller can do adequate action to avoid the accident.

• Asian Journal of Turfgrass Science
• /
• v.21 no.1
• /
• pp.23-37
• /
• 2007

This study was carried out to investigate the characteristics of root growth in Kentucky bluegrass sod(KBS) and creeping bentgrass sod(BGS) transplanted in summer(August 9) and fall(September 19), respectively. Hydroponic system was also used to observe rooting development in the study. Root development differed in KBS by transplanting time. It reached to more than 5 cm after 100 days In summer and 50 days in fall. However, BGS's root grew over 6cm after 40 days, regardless of the season. There was no significant differences in BGS, regardless of any cutting treatment. In the case of KBS, it was best with sod culled with 0.5cm deep and 1.5cm long. But it grew beyond 5 cm in root growth under any treatment after 40 days in transplanting. In a hydroponic study, BGS produced root over 100cm for 80 days through a summer season. However, the root of KBS did only grow in condition below $20^{\circ}C$. These results indicated that root growth characteristics were variable in BGS and KBS. It was considered that rooting development of BGS might be improved with sufficient irrigation in summer, and KBS grows well in lower temperature of $10{\sim}18^{\circ}C$, as compared with BGS. As to establishing the lawn with a sodding method, it should be careful in transplanting time, especially KBS.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.127-140
• /
• 2010

The benefit that a consumer derives from the use of a good often depends on the number of other consumers purchasing the same goods or other compatible items. This property, which is known as network externality, is significant in many IT related industries. Over the past few decades, network externalities have been recognized in the context of physical networks such as the telephone and railroad industries. Today, as many products are provided as a form of system that consists of compatible components, the appreciation of network externality is becoming increasingly important. Network externalities have been extensively studied among economists who have been seeking to explain new phenomena resulting from rapid advancements in ICT (Information and Communication Technology). As a result of these efforts, a new body of theories for 'New Economy' has been proposed. The theoretical bottom-line argument of such theories is that technologies subject to network effects exhibit multiple equilibriums and will finally lock into a monopoly with one standard cornering the entire market. They emphasize that such "tippiness" is a typical characteristic in such networked markets, describing that multiple incompatible technologies rarely coexist and that the switch to a single, leading standard occurs suddenly. Moreover, it is argued that this standardization process is path dependent, and the ultimate outcome is unpredictable. With incomplete information about other actors' preferences, there can be excess inertia, as consumers only moderately favor the change, and hence are themselves insufficiently motivated to start the bandwagon rolling, but would get on it once it did start to roll. This startup problem can prevent the adoption of any standard at all, even if it is preferred by everyone. Conversely, excess momentum is another possible outcome, for example, if a sponsoring firm uses low prices during early periods of diffusion. The aim of this paper is to analyze the dynamics of the adoption process in markets exhibiting network effects by focusing on two factors; switching and agent heterogeneity. Switching is an important factor that should be considered in analyzing the adoption process. An agent's switching invokes switching by other adopters, which brings about a positive feedback process that can significantly complicate the adoption process. Agent heterogeneity also plays a important role in shaping the early development of the adoption process, which has a significant impact on the later development of the process. The effects of these two factors are analyzed by developing an agent-based simulation model. ABM is a computer-based simulation methodology that can offer many advantages over traditional analytical approaches. The model is designed such that agents have diverse preferences regarding technology and are allowed to switch their previous choice. The simulation results showed that the adoption processes in a market exhibiting networks effects are significantly affected by the distribution of agents and the occurrence of switching. In particular, it is found that both weak heterogeneity and strong network effects cause agents to start to switch early and this plays a role of expediting the emergence of 'lock-in.' When network effects are strong, agents are easily affected by changes in early market shares. This causes agents to switch earlier and in turn speeds up the market's tipping. The same effect is found in the case of highly homogeneous agents. When agents are highly homogeneous, the market starts to tip toward one technology rapidly, and its choice is not always consistent with the populations' initial inclination. Increased volatility and faster lock-in increase the possibility that the market will reach an unexpected outcome. The primary contribution of this study is the elucidation of the role of parameters characterizing the market in the development of the lock-in process, and identification of conditions where such unexpected outcomes happen.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.4 s.42
• /
• pp.127-141
• /
• 2006

The purpose of this study was to investigate the actual conditions of the use of them and the moves to strengthen home economics resources for school lifelong education for parents and local residents. This study conducted a systematic random sampling. Questionnaires were distributed to home economics teachers from 285 middle schools, 123 high schools, and 130 of them were sampled as the subjects of this study. The results of this study were as follows. First, home economics teachers were active participating school lifelong educational program. But according to the result of research on the actual condition, the proportion of taking part in it was low. More than half of home economics teachers who took part in program's lecturer were in charge of computer courses. So they didn't show their ability as expert. Also they were in charge of several works than roll of lecturers. It was mentioned too great a burden. There is little in-service training for meeting specialization for school lifelong education. They wanted to take part of lecturers of program and preferred hours of being over class. More than half of them had intended to obtain a lifelong educator's license. The part of elective courses for obtaining a lifelong educator's license is similar to home economics educational contents. So, they have an advantage of obtaining it. Second, one-fifth of school that gave school life education carried out program of related home economics. Mostly they had mothers of students-oriented programs on artistic and leisure. But this is that home economics teachers mentioned less important teaching at society in the future. They importantly mentioned program on children's education in now and the future. Parents of students and local residents also extremely wanted it. For differentiated school life education, quality of programs is important greatly. Third, the actual condition of practical room relating home economics is only practice to cook mostly. So they are reluctant to be open it because of being responsible for the results from using there. It is necessary to ameliorate there's facilities and to increase there's area. Fourth, home economics teachers want to improve their specialization through in-service training, to develop and diffuse programs of superior quality, and to get extra pay for overtime from the government.