겨울철 난방연료가 많이 소모되는 대규모 연동형 온실의 보온성을 향상시키기 위해 터널용 보온자재로 많이 사용되는 다겹보온커튼을 이용하여 기존의 부직포, 알루미늄스크린 등과 보온성을 상대적으로 비교하였다. 또한 다겹보온자재는 보온성이 높으나 두께가 두꺼워 전동모터를 이용한 자동개폐장치를 구성하기 어려운 단점이 있으므로 연동형 온실에 적용할 수 있는 고장이 적고 작동이 원활한 커튼 개폐장치를 개발하여 작물재배 및 난방연료 절감효과를 검토하였다. 다겹보온자재와 부직포, 알루미늄스크린 등의 보온커튼용 자재의 열 관류량을 측정하여 상대적인 보온효과를 비교한 결과 부직포에 비해 알루미늄스크린의 열관류량이 적었고, 알루미늄 및 화학솜의 3겹보온자재와 다겹보온자재는 알루미늄스크린에 비해 열관류량이 각각 23.3%, 43.0% 적게 나타나 다겹보온자재의 보온성이 우수한 것으로 판단되었다. 다겹보온자재는 여러 겹으로 누빈 조합형 보온자재이므로 두께가 두껍고 화학솜, 폴리폼 등 연신되기 쉬운 자재를 이용하므로 장기간 사용시 커튼 개폐장치의 예인선이나 보온자재가 처지게 될 우려가 있으므로 예인식과 권취식 개폐방법을 동시에 적용하여 보온커튼 개페장치를 구성하였다. 시험용 온실 에 다겹보온커튼과 부직포커튼을 설치하고 풋고추를 재배한 결과 다겹보온커튼 설치 온실에서 풋고추의 생육이 유리하였고 초기수량도 27% 정도 증수되었으며, 경유온풍기의 난방연료 소모량은 46%정도 절감되었다.
초고층 복합시설은 수많은 사람들이 이용하고 있는 도심의 핵심시설로서 안전성을 최우선으로 하고 있으며, 화재발생 시 연기와 유독가스는 대형사고를 유발할 수 있다. 본 연구는 초고층 복합시설물에서 화재에 의한 재난이 발생했을 경우, 피난자들이 신속히 안전한 곳으로 피할 수 있는 비상 대피통로용 접이장치에 적용되는 섬유 스크린 소재를 개발하는 데 목적이 있다. 섬유 스크린 소재 개발 방향은 일반적으로 사용되는 철제 소재와 달리 접이장치 내 롤형태로 장기간 보관 시 하중 부담이 적은 경량일 것과 차염/차연 기능이 우수해야 하며 복사열에 의한 피난자의 영향이 적어야 할 것이다. 이에 대해 난연성이 우수한 원단과 후가공을 조건으로 3종의 섬유 스크린 소재를 선정하여 열수축시험, 접촉열시험, 연소성시험, 난연도시험, 인장강도시험, 인열강도시험을 통해 성능평가를 수행하였다. 그 결과 경량의 원단이라도 후가공을 통해 우수한 성능을 발휘할 수 있으며, 실리콘수지 코팅이 섬유 스크린 소재 성능과 복사열에 의한 대피자의 안전을 확보할 수 있는 것으로 나타났다. 이에 따라 무게와 두께가 상이한 유리섬유 2종과 난연 실리콘수지 4종을 대상으로 코팅을 한 후 연소성시험을 수행하여 최적의 후가공조건을 평가하였다.
Nano-scale의 게이트 길이를 가지는 MOSFET소자는 접합 깊이가 20∼30㎚정도로 매우 얕은 소스/드레인 확장 영역을 필요로 한다. 본 연구에서는 As₂/sup +/ 이온의 10keV이하의 낮은 에너지 이온 주입과 RTA(rapid thermal annealing)공정을 적용하여 20㎚이하의 얕은 접합 깊이와 1.O㏀/□ 이하의 낮은 면저항 값을 가지는 n/sup +/-p접합을 구현 하였다. 이렇게 형성된 n/sup +/-p 접합을 nano-scale MOSFET소자 제작에 적용 시켜서 70㎚의 게이트 길이를 가지는 NMOSFET을 제작하였다. 소스/드레인 확장 영역을 As₂/sup +/ 5keV의 이온 주입으로 형성한 100㎚의 게이트 길이를 가지는 NMOSFET의 경우, 60mV의 낮은 V/sub T/(문턱 전압감소) 와 87.2㎷의 DIBL (drain induced barrier lowering) 특성을 확인하였다. 10/sup 20/㎝/sup -3/이상의 도핑 농도를 가진 abrupt한 20㎚급의 얕은 접합, 그리고 이러한 접합이 적용된 NMOSFET소자의 전기적 특성들은 As₂/sup +/의 낮은 에너지의 이온 주입 기술이 nano-scale NMOSFET소자 제작에 적용될 수 있다는 것을 제시한다.
한국작물학회 2017년도 9th Asian Crop Science Association conference
/
pp.276-276
/
2017
This study was examined to establish a conditions for producing Tteokbokki using dry-milling rice flour which can save manpower and labor time. Since the cost of producing rice flour milled in a wet condition is 500 to 700 won/kg, which is more than twice as much as that of 300 won wheat flour, it is necessary to directly make rice flour from raw rice. The dry-milling rice flour used in the experiment was produced by Air mill (Nara machinary co. ltd., Tokyo, Japan) from 5 rice cultivars (Samkwang, Dasan-1, Boramchan, Seolgaeng, Hanareum-2), which were cultivated in A-san in 2015 year. Their particle sizes were 50, 100 and $150{\mu}m$ for each cultivar, respectively. A control was a wet-milled rice flour milled with a roll mill after the rice was soaked in water for 4 hours. The moisture content of dry-milling rice flour based on cultivars was 11 ~ 12%, and added water up to 50~55% of dry-milling rice flour weight. The RVA characteristic of peak viscosity was the highest in Dasan-1 and Hanareum-2, the lowest in Seolgaeng. The setback value used as an indicator of aging was the highest in Dasan-1, therefore Dasan-1 was expected to be quick solidification, resulting in the low tendency of sensory evaluation. The damaged starch was high in Dasan-1 and Boramchan (p<0.05) compared to others. The Hunter color L were no significant among cultivars and b value increased in all cultivars of dry-milling rice flour compared with control. The hardness of dry-milling rice flour was higher than that of the control, especially Dasan-1 and Hanareum-2 were the highest. Based on the sensory evaluation, the best cultivars were Boramchan, Hanareum-2 and Samkwang. The overall preference of dry-milling rice flour was good in particle size of 50~100um.
The purpose of this study was to investigate the correlation and characteristics between electromyographic (EMG) activities of lower leg muscles and the posturographic assessment of static balance control in normal adults. Twenty-four young, healthy adults(12 males, 12 females) participated in the study. Center of pressure (COP) parameters were obtained using force platform as total path distance, total sway area, X mean frequency and Y mean frequency for 20 seconds in the following conditions: (1) comfortable standing with eyes opened or closed, (2) uncomfortable standing (feet together) with eyes opened or closed, (3) virtual moving surround delivered using Head mount display (HMD) with four different moving patterns. The virtual moving patterns consisted of close-far, superior-inferior tilting (pitch), right-left tilting (roll), and horizontal rotation (yaw) movements. Surface electromyographic activites were recorded on the tibialis anterior, peroneus longus, medial and lateral heads of gastrocnemius muscles under each condition. Correlation between the posturographic measures and EMG activities were evaluated. Total path distance and total sway area of COP were significantly increased during uncomfortable standing. EMG activity of tibialis anterior was significantly more during uncomfortable standing and virtual moving surround stimulation than during comfortable standing. Total path distance and sway area of COP during comfortable standing with closed eyes showed significant positive correlation with the EMG activities of the lateral head of gastrocnemius muscle. Total path distances and total sway area of COP during muscle. Total path distances and total sway area of COP during presentation of virtual moving surround also had significant positive correlations with EMG activities of the lateral head of gastrocnemius muscle under close-far movement.
Purpose: This study aimed to explore the relations between class distracting factors and class satisfaction of the dental technology students and then provide a primary data to help further related studies and develop educational programs with which instructors can efficiently manage their classroom. Methods: For this study we have conducted a survey started from the beginning of May 2017 to the end of June. The subjects of the survey were Dental Technology students of D-city, K-city, W-city, selected by random sampling method. The questionnaire was self-administrated and 437 valid results were chosen for our analysis among 450 distributed questionnaires. Results: The results of the research was as follows. Firstly, The overall average point of class distracting factors was 2.5 point. The environmental factors were the highest point as 2.59 and as for the subcategories tiredness and drowsiness was the highest point as 2.76. Secondly, The overall average point of class satisfaction turned out 3,88 point and compliance with class and attitude factors gained the highest point as 4.06. Of the subcategories strict roll checking was the highest point as 4.17. Thirdly, As for class distracting factors from general characteristics a statistical significance was shown as follows; 'instructor factor'(p<.01), 'learner factor'(p<.05), 'total class distracting factor'(p<.05) in the area of gender, 'environmental factor'(p<.001), 'total class distracting factor'(p<.01), 'learner factor'(p<.05), 'instructor factor'(p<.05) in the area of gender 'learner factor'(p<.001), 'instructor factor'(p<.001), 'environmental factor'(p<.001), 'total class distracting factor'(p<.01) in the area of class grade, 'environmental factor'(p<.05) in GPA. Fourthly, A statistical significance, a negative correlation (p<.01) were shown between class distracting factors and class satisfaction. Class distracting factor that especially affects the class satisfaction was instructor factor(p<.001) and the explanatory power of the model turned out 14.7%, which was statistically meaningful (p<.001). Conclusion : Results of this study reveal that instructor factor is the key to class satisfaction of the students. So it is crucial that the instructor faithfully prepare for the class to reinforce the students' learning. Additionally further studies should be followed with more subjects and newer perspectives to develop innovative teaching methodology.
이중게이트 MOSFET는 스케일링 이론을 확장하고 단채널효과를 제어 할 수 있는 소자로서 각광을 받고 있다. 단 채널효과를 제어하기 위하여 저도핑 초박막 채널폭을 가진 이중게이트 MOSFET의 경우, 20nm이하까지 스케일링이 가능한 것으로 알려지고 있다. 이 논문에서 는 20m이하까지 스켈링된 이중게이트 MOSFET소자에 대한 분석학석 전송모델을 제시하고자 한다. 이 모델을 이용하여 서브문턱스윙(Subthreshold swing), 문턱전압변화(Threshold voltage rolloff) 드레인유기장벽저하(Drain induced barrier lowering)와 같은 단채널효과를 분석하고자 한다. 제안된 모델은 열방출 및 터널링에 의한 전송효과를 포함하고 있으며 이차원 포아슨방정식의 근사해를 이용하여 포텐셜 분포를 구하였다. 또한 터널링 효과는 Wentzel-Kramers-Brillouin 근사를 이 용하였다. 이 모델을 사용하여 초박막 게이트산화막 및 채널폭을 가진 5-20nm 채널길이의 이중게이트 MOSFET에 대한 서브문턱영역의 전송특성을 해석하였다. 또한 이 모델의 결과값을 이차원 수치해석학적 모델값과 비교하였으며 게이트길이, 채널두께 및 게이트산화막 두께에 대한 관계를 구하기 위하여 사용하였다.
논 주변에 서식하는 거미의 종류, 우점종, 월동상태, 증식상황, 이동상황, 년중 밀도변동상황 등을 파악하여 종합적 해충방제체계에 있어서 논거미의 보호 및 활용방안을 모색하고자, 경남 진주와 남해에서 1987년 12월부터 1988년 12월까지 논주변을 논둑, 보리밭, 휴한답, 본답 등으로 나누어 월 2${\sim}$4회 채집하고 종류와, 각 발육태별 밀도를 조사한 결과는 다음과 같다. 1. 거미는 총 10과 31속 34종이 채집되며, 논둑에서 34종, 보리밭에서 16종, 휴한답에서 17종, 본답에서 18종으로 나타나 논둑에서 종 구성이 다양하였다. 2. 진주와 남해의 각 채집장소별 논둑과 보리밭에서는 별늑대거미(Pardosa astrigera L. Koch), 휴한답에서는 황산적거미(Pirata subpiraticus (B. et S.)), 본답에서는 턱거미(Pachygnatha clercki Sunduvall)로 나타났다. 3. 논 주변 거미의 서식장소, 월동태, 거미줄 유무등 생태학적 특성과 과(科)(Family) 또는 속(屬)(Genera) 수준의 분류학적 특징으로 다음과 같은 9개의 거미군(Group)으로 분류할 수 있었다. Group 1 - 부이표늑대거미류(Pirata spp.); Group 2 - 턱거미류(Pachygnatha clercki); Group 3 - 소형정주성거미류(Theridiidae, Erigonidae, Linypiidae); Group 4 - 갈거미류(Tetragnatha spp.); Group 5 - 황닷거미류(Dolomedes surfureus); Group 6 - 긴마디늑대거미류(Pardosa spp.). Group 7 - 깡충거미류(Salticidae); Group 8 - 게거미류(Thomisidae); Group 9 - 염낭거미류(Clubionidae); 4. 9개 거미군 중 1-5군은 호습성 거미류로서 본 답기에 벼해충의 중요한 천적으로 여겨지며, 6-9군은 건조한 곳을 선호하는 거미류로서 논둑에서 월동중인 애멸구와 끝동매미충의 천적으로서 역할이 클 것으로 인식되었다.
Objectives: This study aimed to assess exposure to black carbon(BC) among forklift operators and to identify environmental and occupational factors influencing their BC exposure. Methods: We studied a total of 23 forklift operators from six workplaces manufacturing paper boxes. A daily BC exposure assessment was conducted during working hours from January to April 2017. A micro-aethalometer was used to monitor daily BC exposure, and information on work activities was also obtained through a time-activity diary(TAD) and interviews. BC exposure records were classified into four categories influencing BC exposure level: working environment, workplace, forklift operation, and job characteristics. Analysis of variance(ANOVA) was used to compare average BC exposure levels among the four categories and the relationships between potential factors and BC exposure were analyzed using a multiple linear regression model. Results: The operators' daily exposure was $12.9{\mu}g/m^3$(N=9,148, $GM=7.5{\mu}g/m^3$) with a range: $0.001-811.4{\mu}g/m^3$. The operators were exposed to significantly higher levels when they operate a forklift in a room ${\leq}20,000m^3$($AM=12.3{\mu}g/m^3$), in indoor workplaces($AM=16.3{\mu}g/m^3$), when they operate a forklift manufactured before 2006 ($AM=13.2{\mu}g/m^3$), a forklift with a loading limit of four-tons($AM=27.1{\mu}g/m^3$), with a roll and bale type clamp($AM=17.1{\mu}g/m^3$), and with no particulate filter($AM=15.7{\mu}g/m^3$). Conclusions: Occupational factors including temperature, smoking, season, daytime, room volume($m^3$), location of operating, and manufacturing era and model of forklift influenced the BC exposure of forklift operators. The results of this study can be used to minimize the BC exposure of forklift operators.
본 연구는 건조 연근을 포장방법(PE 필름, PP 필름, 마대, 종이봉투)과 저장온도(-5, 0, 10, $20^{\circ}C$)를 달리하여 품질의 변화를 알아보기 위해서 수분함량, 경도변화, 색도를 조사하였다. 저장기간 동안 수분의 함량은 PE, PP 포장재에서 종이봉투 및 마대 처리구 보다 수분함량이 높았으며, 저장온도가 낮을수록 수분함량이 낮게 나타났다. 한편, 마대와 종이봉투 포장재는 온도에 따 시료간의 수분함량 차이에 있어서 PE와 PP의 포장재와 달리 큰 차이를 나타냈다. 색상은 $-5^{\circ}C$에 저장한 마대 및 종이봉투는 저장 330일까지 h값이 안정적인 경향을 나타내었으나 0, $10^{\circ}C$, $20^{\circ}C$에서 저장한 마대, 종이봉투 포장재는 안정적이지 못한 경향을 나타냈다. 경도는 온도에 의해 약간 차이가 나지만 PE와 PP포장재가 다른 포장재보다 경도 값이 높았으며 또한 부패현상, 갈변반응 억제도 효과적인 결과를 나타냈다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.