• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.302-307
• /
• 1999

We have grown a high quality ZnSe(100) epilayer on the GaAs(100) substrate by hot-wall epitaxy method. The FWHM value from double-crystal x-ray diffraction rocking curve and growth rate of the ZnSe epilayer grown under the optimal growth conditions were 195 arcsec and 0.03 $\mu \textrm m$/min, respectively. The $I_2^U$ and $I_2^L$ peaks, which split by strain due to lattice mismatch between substrate and epilayer, were measured from the photoluminescence experiment. And we found that the residual impurities in ZnSe epilayer were concerned with Al or CI elements from the calculated binding energy of donor impurity.

• Earthquakes and Structures
• /
• v.19 no.2
• /
• pp.103-117
• /
• 2020

The effect of the foundation size on the efficiency of seismic base isolation using a layer of stone pebbles is experimentally investigated. Four scaled models of buildings with different stiffnesses (from very stiff to soft) were tested, each with the so-called small and large foundation, and exposed to four different accelerograms (different predominant periods and durations). Tests were conducted so that the strains in the model remained elastic and afterwards the models were tested until collapse. Each model was tested for the case of the foundation being supported on a rigid base and on an aseismic layer. Compared to the smaller foundation, the larger foundation results in a reduced rocking effect, higher earthquake forces and lower bearing capacity of the tested models, with respectable efficiency (reduced strain/stress, displacement and increase of the ultimate bearing capacity of the model) for the considered seismic base isolation compared to the foundation on a rigid base.

• Electrical & Electronic Materials
• /
• v.8 no.4
• /
• pp.464-471
• /
• 1995

메그네트론 스퍼터링으로 제작한 고밀도 다층박막($Co_75{{Pt_12}{Cr_13}}$합금) 디스크를 투과전자현미경을 이용해 단면 및 평면의 미세조직의 조사 혹은 미소부위 성분분석을 할 경우, 선행되어야하는 시편준비 경로와 각 단계별 구체적방법 및 그 효과를 연구하였다. Ion밀링시간이 증가함에 따라 시료가 얇게 되는과정에서 스퍼터링된 물질이 관찰될 시편부위의 다른 표면에 증착되므로써 미세조직의 선명도를 해칠 수 있고, 이로인한 해석상의 오류가능성이 시사되었다. 또한, 자기박막 디스크와 같이 다층으로 구성된 단면분석용 시료에서는 서로 맞붙인 실리콘 단결정 접착면을 따라 밀링속도가 선택적으로 커서 우선축이 생김으로써 양질의 시편을 얻기 어려운 문제점이 제기되었다. 이같은 문제를 포함한 전자현미경 시료준비과정에서 생길 수 있는 문제를 해결할 수 있는 실마리와 이를 이용해 수행한 전자현미경 분석결과 및 효과적인 시편준비방법이 본 논문에서 언급되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.224-227
• /
• 2001

ZnO buffer layers were used to grow ZnO films on c-plane sapphire substrates. The role of ZnO buffer layers in the growth of ZnO thin films on sapphire substrates was investigated by scanning electron microscopy, X-ray diffraction, and Photolumminescence(PL) measurements. At the optimized ZnO buffer layer thickness of 100 $\AA$, FWHM of $\theta$ -rocking curve of ZnO thin films was minimized to 0.73 degrees and room temperature PL spectra showed that deep level emission was not hardly seen. The optimization of the ZnO buffer layer thickness resulted in improvements of the surface morphology and crystalline quality of ZnO thin films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.70-73
• /
• 1997

The purpose of this study is to research and develop poly(p-phenylene)(PPP)-based carbon obtained by pyrolyzing electrochemically prepared PPP as a anode of rocking chair batteries. Disordered carbon materials were obtains by heat-treating of PPP films in a nitrogen atmosphere at 4$0^{\circ}C$ to 110$0^{\circ}C$ for 1 hour. The carbon prepared by heat treatment showed a broad x-ray diffraction peak having characteristics of disordered carbon. Carbon electrodes were charged and discharged at a current density of 0.1㎃/$\textrm{cm}^2$. First discharge capacity of 267㎃h/g and 34% of charge/discharge efficiency were observed from PPP-based carbon prepared at $700^{\circ}C$.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.470-475
• /
• 1999

ZnS and ZnTe epilayers were grown on GaAs(100) GaP(100) substrates by hot-wall eitaxy. X-ray diffraction revealed that the epilayers have zinc-blende structure and were grown in (100) direction. The small values of the full width at half maximum (FWHM) of double crystal rocking curve (DCRC) showed high quality of the epilayers. From the thickness dependence of the FWHM of DCRC, the strain remaining in films is found to be due to the thermal expansion difference as well as due to the lattice mismatch.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.71-74
• /
• 1998

$Er^{3+}$ doped $NdF_{3}$ single crystalline thin films with smooth, microcrack-free, and high-crystalline quality were grown on $CaF_{2}(111)$ substrate at $500^{\circ}C$by molecular beem epitaxy(MBE). The relation-ship between subcell and supercell showing the reconstructed $3^{1/2} \times 3^{1/2}$ structure was studied by reflection high-energy electron diffraction(RHEED) investigation. The film surface and the growth mode were examined in studied by RHEED patterns and atomic force microscope(AFM) images ex situ. The crystallinity of film and the lattice mismatch between $NdF_{3}Er}^{3+}(0002)$ film and $CaF_{2}(111)$ substrate depending in the $Er^{3+}$ concentration were investigated by X-ray rocking curve analysis.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.04a
• /
• pp.312-319
• /
• 2001

The purpose of this study is to evaluate the strength of piers subjected to earthquake ground motion. In particular, the piers of an unreinforced masonry wall under in-plane seismic loading are considered with emphasis. For this purpose, several pier strength equations in seismic rehailitation provisions such as UCBC, FEMA 178, FEMA 273, and FEMA 306 are compared. This strength equations in different provision are applied for calculating the strength of a pier in building. According to the results of this study, it is shown that the assessment procedure based on FEMA 178 overestimated pier strengths comparing to other provisions when all piers are in Rocking-controlled mode.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.10a
• /
• pp.202-209
• /
• 1996

In this paper, two dimensional vertical and comer infinite elements which can include multiple wave components to model underlying half space are developed. These elements are natural and economical to model underlying stiff half space or rock. To verify the behavior of these infinite elements, vertical, horizontal, and rocking compliances of a rigid strip foundation on a viscoelastic soil profile are analyzed and compared with those of Tzong and Penzien who used the boundary solution method. Good agreements are noticed between the two methods. The influence of material properties like Poisson's ratio, material damping, and stiffness ratio of layers as well as the influence of geometrical properties such as layer thicknesses and depth of foundation embedment are studied. Example analysis is carried out for the shaking table which is located in KIMM(Korea Institute of Machinery and Materials), and the vertical and horizontal displacements of the analysis are compared with the measured, and show good results and demonstrate the efficiency of the proposed method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.46-49
• /
• 2006

In general, the shear behavior mode of URM wall expresses four types of modes such as rocking failure, sliding shear failure, toe crushing failure, and diagonal tension failure. From the comparison of each equation according to the shear behavior modes, the failure modes based on the aspect ratio and vertical axial stress can be expected. The objectives of this study is to find out the shear behavior of URM wall with different aspect ratio. The test results show that the aspect ratio is understood as an important variable.