• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.548-552
• /
• 2003

During the last few decades, the frequency and distribution of rockfalls have been increased in Korea due the development of rock slope in mountain areas. Although the scale of, falling block of rockfall was small, there were some casualties of lives and loss of properties. In order to reduce damage from rockfall, analysis on rock slope indanger of rockfall should be carried out. Thus, the simulation softwares for rockfall behavior analysis have been introduced. In this study, geotechnical investigation and input data for rockfall simulation are described with the comparison among four commercially available rockfall simulation softwares. Finally, rockfall simulation works are described by exmining a case of inaccessible rock-slope of potential rockfall in Korea.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.581-584
• /
• 2008

본 연구에서는 형상과 규모에 따른 낙석의 특성별로 그 운동과 영향 요인을 분석하였다. 선정된 대상 사면에 대해 낙석 시뮬레이션 프로그램을 수행하여 낙석 특성별 운동에너지 분포화 낙하속도, 도약높이 등에 대한 분석과 연구를 수행하였다. 또한, 연구대상 절토사면의 대책 방안인 낙석방지울타리의 효율적인 설치를 위해 낙석의 운동에너지와 도약높이 등을 활용하는 방안을 검토하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.719-724
• /
• 2005

It conducted an analysis and the research against kinetic energy distribution, velocity and bounce height according to rockfall characteristics using rockfall simulation program in cut-slope. This study considered kinetic energy and bounce height of rockfall for efficient establishment of rockfall protection fencefence that is countermeasure in cut-slope.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.523-530
• /
• 2002

Recently, while rockfall occurs very frequently, a lot of researches on the rockfall protection fence Is in process. But the rockfall protection fence has been installed unrelated to slope characteristics, rockfall shape and rockfall height. Therefore, in this study we suggested the effective protection fence model considering about rockfall energy and energy absorbing capacity and we verified the model by field test. According to these results, it is more reasonable to evaluate rockfall energy based on the results of simulation program, which can be consider effects of energy decrease, than use the simplified method proposed by Japanese road association. And rockfall energy is affected by the size of supports and wire rope and the space of supports. As the results of comparing rockfall energy with energy absorbing capacity, type$\circled1$(the space of supports is changed to 3.0m)can be available for generally expected rockfall except the rock slope over 30m heights. But rockfall protection fence installed at the field, it should be partially reinforced after consideration of slope particularities and construction conditions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.629-634
• /
• 2000

Rockfall protection fence which is used for mitigation of rockfall hazard, has been constructed without consideration of lithology, height and dip angle of rock slope. However, those factors should be considered for the construction of the protection fence. In addition, the protection fence should be evaluated its performance by in-situ test in order to utilize the fence effectively. This is the first full sized rockfall test in Korea. For this test, the rock cut slope whose height is about 20 m and dip angle is 65 $^{\circ}$ has been chosen. Based on the preliminary simulation procedure, four different concrete balls (0.5 ton, 1.0 ton, 2.0 ton and 5.0 ton) were prepared and four different types of protection fence were constructed. The results of this test will be utilized in the establishment of rockfall protection fence construction manual.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.293-298
• /
• 2003

The rockfall protection fences are installed to reduce rockfall damage in roads side slopes. The energy absorbing capacity of widely used rockfall protection fences is about 50kJ, But in many cases, rockfall protection fences are easily damaged even by a low level of rockfall energy. The objective of this paper is to verify the energy absorbing capacity of rockfall protection fences and investigate the behavior of them by rockfall. The LS-DYNA3D, a finite elements analysis program for dynamic movement of three dimensional objects, is used to perform the numerical simulations. In the result it is shown that rockfall protection fences absorb half of standard absorbing energy or less than it. It is inadquate for the rockfall protection fences to perform the principal function. To improve the performance of the fences, new rockfall proctection fence is proposed and numerical simulation is performed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.461-466
• /
• 2003

The rockfall protection fences are installed to reduce rockfall damage in roads side slopes. The energy absorbing capacity of widely used rockfall protection fences is about 50kJ. But in many cases, rockfall protection fences are easily damaged even by a low level of rockfall energy. The objective of this paper is to verify the energy absorbing capacity of rockfall protection fences and investigate the behavior of them by rockfall. The LS-DYNA3D, a finite elements analysis program for dynamic movement of three dimensional objects, is used to perform the numerical simulations In the result, it is shown that rockfall protection fences absorb half of standard absorbing energy or less than it. It is inadquate for the rockfall protection fences to perform the principal function. To improve the performance of the fences, new rockfall proctection fence is proposed and numerical simulation is performed.

• 터널과지하공간
• /
• 제24권4호
• /
• pp.275-281
• /
• 2014

국내 국도에 분포하는 160개 비탈면에서의 발생한 낙석에너지의 특성을 고려하여 신뢰도지수를 산정하고 낙석방지울타리의 요구성능을 고찰하였다. 몬테카를로 시뮬레이션을 통해 낙석에너지를 결정하는 변수의 통계적 특성을 고찰한 결과 비탈면 경사는 정규분포형태이며, 낙석중량과 발생높이는 대수정규분포형태인 것으로 나타났다. 낙석에너지는 대수정규분포형태인 것으로 나타났으며 이는 낙석중량에 영향을 받은 결과로 판단된다. 낙석방지울타리의 신뢰성지수는 0.678이며 파괴확률은 24.9%로 매우 높은 것으로 나타났다. 국내의 낙석에너지 규모를 고려하여 제시된 낙석방지울타리의 요구성능은 최대 500kJ 수준이며 신뢰성지수의 범위는 1.028~1.956으로 분석되었다. 제시된 신뢰도지수를 통해 비탈면의 낙석에너지가 고려된 요구성능을 적용할 경우 낙석방지울타리의 파괴확률은 14.8~2.5% 수준인 것으로 분석되었다.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.67-76
• /
• 2007

낙석에 영향을 주는 요소로는 기울기, 높이, 표면 거칠기 등의 비탈면 형태, 식생, 퇴적물질 등의 사면 구성재료 및 낙석 형상, 무게 등이 있다. 이들 영향요소 중 낙석의 크기 즉, 무게는 낙석시뮬레이션 결과에 큰 영향을 미침에도 불구하고 낙석무게에 대한 연구는 많이 이루어지고 있지 않다. 또한, 낙석의 크기는 현장의 절리간격에 의해서 영향을 많이 받으며, 현장의 발생 가능한 낙석무게분포는 절리간격을 이용하여 산정할 수 있다. 따라서 본 연구에서는 절리간격을 이용하는 체적절리개수(volumetric Joint count, $J_{\nu}$) 및 $RQD-J_{\nu}$ 관계를 이용하여 낙석무게분포를 산정하였으며, 이는 연구부지에 대한 직접적인 현장낙석 조사결과 및 기존 문헌자료를 이용하여 비교 검증을 수행하였다. 낙석무게 추정결과 분석방법에 따라서 유사한 결과를 보이는 것으로 분석되었으며, 200kg 이하는 $75.3{\sim}76.7%,\;200{\sim}400kg$은 $15.0{\sim}16.6%$, 400kg 이상은 $6.7{\sim}9.7%$의 분포를 보이는 것으로 나타났다. 또한, 현장의 낙석무게분포와 비교한 결과 유사한 분포를 보이는 것으로 나타났다. 따라서 본 연구에서 제시한 방법으로 산정한 낙석무게분포는 낙석시뮬레이션의 입력 자료로 사용할 수 있을 것으로 판단되며, 그 추정 결과를 본 현장사면의 낙석 검토시 사용할 경우 경제적인 검토결과를 보이는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.103-116
• /
• 2003

Rockfall Protection fence is one of the most common rockfall Protection methods in Korea. If rockfall protection fences are required along the road or railway, their location, height and capacity, in terms of the maximum kinetic energy that they can absorb, should be specified. Within this paper, the best practice of rockfall barrier is introduced. Modern rockfall simulations as a means to define risks, protection requirements, dynamic loading and height of potential structures and selection of appropriate placement is presented. Technical possibilities of rockfall barriers and their actual limits are presented. Safety concepts based on probabilistic approaches are proposed. Recent studies peformed in other countries show that Flexible Barriers are also a feasible system to stop and retain debris flows. Finally an outlook onto further development is given.