• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.85-93
• /
• 2006

The trend of miniaturization has been applied to the research of rockets to develop prototypes of micro rockets. In this paper, the development of a web-integrated prototyping system for three-dimensional micro rockets, and the results of combustion tests are discussed. The body of rocket was made of 6061 aluminum cylinder by lathe process. The three-dimensional micro nozzles were fabricated on the same aluminum by using micro endmills with ${\phi}100{\mu}m{sim}{\phi}500{\mu}m$ diameter. Two types of micro nozzle were fabricated and compared for performance. The total mass of the rockets was 7.32 g and that of propellant (gun powder) was 0.65 g. The thrust-to-weight ratio was between 1.58 and 1.74, and the flight test with 45 degree launch angle from the ground resulted in $46\;m{\sim}53\;m$ of horizontal flight distance. In addition, ABS housing for the micro machined rocket was fabricated using Fused Deposition Modeling (FDM). A web-based design, fabrication, and test system for micro nozzles was proposed to integrate the distributed hardware resources. Test data was sent to the designer via the same web server for the faster feedback to the rocket designer.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.124-134
• /
• 2019

As the types of North Korea's provocation are diverse and unexpectable in the costal area, ROK navy needs to develop countermeasures, such as costal defence guided rockets. Recently ROK navy developed the PKX-B which is equipped with the new 130 mm guided rocket. The most popular rockets are LOGIR for short range targets, 130 mm guided rocket for middle range targets and Spike-NLOS for long range targets. As various guided rockets are developed, it is required to develop a guided rocket analysis model and it's analysis methodology. In addition, these guided rockets can be installed on any platforms; ground vehicle, aircraft and warship. The paper proposes systematic methodology to estimate the operational effectiveness of costal defence guided rockets. A case study exploiting the ARENA simulation model is explained to demonstrate the implementation of the proposed methodology.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.76-81
• /
• 1989

This paper represents the preliminary design process and the performance of the sounding rockets. At the design phase of the development, we selected rocket configuration according to results of aerodynamic weight and thrust analysis. And the payload-apogee performance of the rockets are determined with the variation of the launch angle and payload weight. Also the performance trajectory was calculated by a particle trajectory simulation. And the parameters which affect the system performance was analyzed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.550-559
• /
• 2004

Theoretical studies have been carried out to examine the influence of the grain geometry-dependent driving forces, which control the internal flow pattern of solid rockets. Numerical studies have been executed with the help of a two-dimensional code. This code solves standard k-omega turbulence equations using the coupled second order implicit unsteady formulation. It has been concluded that the grain port divergence angles have significant leverage on the formation of recirculation bubbles leading for pressure oscillations, flow separation and reattachment. In solid rockets flow reattachment will favour secondary ignition and that will add to the complexity of the starting transient prediction.

• 한국군사과학기술학회지
• /
• 제23권5호
• /
• pp.494-501
• /
• 2020

When we develop an OpenGL-based coastline map that displays the high resolution data of GSHHG, it takes tens of seconds until the first scene is rendered. That is because it takes time to tessellate polygons with a huge number of vertices. A commonly used solution is that it converts original data to a customized data in advance, and it displays these. But if we should use original data to display a coastline map, we need to find another solution. In this paper we suggest using a polygon splitting technique to minimize tessellation time. In order to prove its effectiveness, we implemented a software applied this technique and measured its performance. The software applied this technique took a few seconds to display the first scene and we confirmed its effectiveness.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.251-254
• /
• 2004

하이브리드 로켓은 고체, 액체 로켓과 비교하여 많은 장점을 가지고 있다. 하이브리드 로켓은 액체 로켓에 비해 구조적으로 단순하고 비용도 저렴하지만 액체 로켓과 유사한 $I_{sp}$를 발휘한다. 또한 고체 로켓에서는 불가능한 엔진 소화$\cdot$재점화가 가능한 장점을 가지고 있다. 하이브리드 로켓의 추력은 산화제의 유량에 비례하여 증가한다. 본 연구에서는 소형 하이브리드 로켓을 설계 제작하여 실험을 수행하였다. 전체 시스템은 하이브리드 로켓 연소기, 점화장치, 유량 조절장치 그리고 데이터 획득 장치로 구성하였다 산화제의 유량을 조절하기 위해 니들 밸브와 스텝 모터를 결합하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.466-475
• /
• 2011

본 논문에서는 관측 장치와 송신기를 탑재하여 발사되는 관측로켓의 국내외 개발 현황에 대해 서술하였다. 국외 연구의 경우, 미국은 NASA에서 가장 활발히 진행되며 탑재량 38~680 kg을 고도 88~1500 km까지 올릴 수 있고, 현재에도 매년 20-30기의 로켓을 발사하고 있다. 유럽은 ESA을 중심으로 연구 중이고 매년 4-5기의 로켓을 발사하고 있다. 국내 연구의 경우, 고체 추진기관 KSR-I,II와 액체 추진기관 KSR-III를 성공적으로 발사하였으나, 우주발사체 개발 기술은 타 산업에 비해 낙후 되어 있는 것이 현실이며 이러한 발사체 개발 분야는 적극적인 지원 및 선진 기술 습득을 통하여 활성화 시켜야할 것이다. 따라서 본 연구를 통하여 한국형 관측로켓 개발에 대한 필요성 및 발전방향을 제시하고자 한다.

• 한국추진공학회지
• /
• 제15권3호
• /
• pp.70-79
• /
• 2011

본 논문에서는 관측 장치와 송신기를 탑재하여 발사되는 관측로켓의 국내외 개발 현황에 대해 서술하였다. 국외의 경우, 미국은 NASA에서 가장 활발히 진행되며 탑재량 38~680 kg을 고도 88~1500 km 까지 올릴 수 있고, 현재에도 매년 20-30기의 로켓을 발사하고 있다. 유럽은 ESA를 중심으로 연구 중이고 매년 4-5기의 로켓을 발사하고 있다. 국내 연구의 경우, 고체 추진기관 KSR-I,II와 액체 추진기관 KSR-III를 성공적으로 발사하였으나, 우주발사체 개발 기술은 타 산업에 비해 낙후 되어 있는 것이 현실이며 이러한 발사체 개발 분야는 적극적인 지원 및 선진 기술 습득을 통하여 활성화 시켜야할 것이다. 따라서 본 연구를 통하여 한국형 관측로켓 개발에 대한 필요성 및 발전방향을 제시하고자 한다.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.36-41
• /
• 2011

Numerical simulation of air-launched rockets from a helicopter was conducted to investigate the aerodynamic interference between air-launched rocket and helicopter. For this purpose, a three-dimensional inviscid flow solver has been developed based on unstructured meshes. An overset mesh technique was used to describe the relative motion between rocket and rocket launcher. The flow solver was coupled with six degree-of-freedom equation to predict the trajectory of free-flight rockets. For the validation, calculations were made for the impinging jet with inclined plate. The rotor downwash of helicopter was calculated and applied to simulation of air-launched rocket. It is shown that the rotor downwash has non-negligible effect on the air-launched rocket and its plume development.

• Advances in concrete construction
• /
• 제15권4호
• /
• pp.229-239
• /
• 2023

Anti-tank weapons are among the infantry weapons used by the armies of many countries. Anti-tank rockets and explosives such as TNT, generally used for armour piercing, are also frequently used in terrorist attacks. These attacks damage the protection facilities built from reinforced concrete. Rockets or similar explosives' rapid speed and burst temperatures pierce reinforced concrete during strikes, resulting in casualties and damage to crucial strategic structures. This study aimed to devise an economic and applicable reinforced concrete plate that could absorb the impact of anti-tank rockets and Trinitrotoluene (TNT) type explosives. Therefore, 5 different samples, produced from C50 reinforced concrete and 150×150 cm in size, were formed by combining plates of different numbers and thicknesses. Also, a sample, which was a single thick plate, was prepared. In destructive testing, Rocket Propelled Grenade (RPG-7) was used as the anti-tank rocket launcher. As a result of this study, the impact damage was reduced with hollow concrete plate geometries, and recommendations were developed for complete prevention.