• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.324-327
• /
• 2008

Two stage startup of high thrust liquid rocket engine can reduce the abrupt impulse to the vehicle and engine by changing oxidizer flow rate to the combustion chamber. Also it ensures stable ignition of combustion chamber against hard start and to prevent pump stall by the sudden supply of large mass flow rate. However high discharge pressure of oxidizer pump or temperature rise in gas generator may be a problem in applying the preliminary stage. To solve this problem, we analyzed the effect of the slope of oxidizer pump's head curve and the oxidizer mass flow rate to combustion chamber during preliminary stage using the rocket engine startup analysis code. A moderate slope(${\circleddash}{\sim}$-3) of head curve and 80% mass flow rate during preliminary stage can reduce the oxidizer pump discharge pressure by 15 to 20% comparing with the condition of ${\circleddash}$=-4.37 head curve and 70% mass flow rate. Also it can maintain the turbine inlet temperature rise within 50K from the nominal value.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.574-577
• /
• 2012

Thrust measuring is one of the crucial factor to decide the performance of a liquid rocket engine when the engine development test, especially for the combustion chamber, is implemented. Calculating the thrust from a combustion pressure is used when direct measuring the thrust is impossible, but direct measuring the thrust is necessary and various methods for doing it more precisely should be considered. This paper introduces the preliminary design concept about the new thrust measurement system for the vertical firing test stand, which is introduced domestically for the first time, of a liquid rocket engine combustion chamber.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.437-443
• /
• 2014

Engine is one of the most important parts in a rocket for completing its mission successfully. In this paper, we provide a methodology for estimating reliability and development cost of a liquid rocket engine newly developed. To estimate reliability, a baseline engine is selected considering factors whose effects on reliability are unquantifiable. Then reliability of a baseline engine is adjusted to reflect the effect of factors that can be modeled quantitatively. Using the previous Transcost engine cost expressed in terms of mass and the number of hot firing tests, the engine development cost is reexpressed in reliability and thrust requirements. Finally, a numerical example is given to illustrate the application of the methodology to a turbopump rocket engine using staged combustion cycle with LOX/LH2 propellant.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.196-200
• /
• 2012

To acquire indigenous development abilities of a future space launcher, bi-propellant liquid rocket engines using environmentally clean propellants such as hydrogen peroxide and methane have been developed by Chungnam national university. The necessary development technologies for the future liquid rocket engines were defined and have been acquired step-by-step in advance by sub-scale liquid rocket engines. Core techniques of design/manufacture/experiments to develop a future prototype liquid rocket engine will be obtained by this study.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.66-73
• /
• 2004

As a rocket propellent of hydrocarbon fuels, the characteristics of liquefied natural gas was evaluated with the viewpoint of the constituents and content, the cooling performance as a coolant, and characteristic velocity and specific impulse as parameters of the engine performance. Content of methane was a principal factor to determine the characteristics as a rocket propellant and more than 90% of it was needed as a fuel and coolant in the regenerative cooled liquid rocket engine. Some constituents of the liquefied natural gas can be frozen by the pre-cooling of the pipe lines, therefore they can be a factor disturbing the normal working of engine. In case the content of methane is around 90% in the liquefied natural gas, a normalized stoichiometric O/F mixture ratio of 0.75 is suggested for a nominal operation condition to get the maximum specific impulse and characteristic velocity.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.86-97
• /
• 2010

This paper treats with the history and current trends in the developments of liquid-propellant rocket engine in Russia and Ukraine which are among world leaders in the technology of liquid rocket engine(LRE). In 1960s formerly the Soviet Union accepted the closed cycle engine for increasing the pressure in the combustion chamber and specific impulse to the maximum. However, since financially difficult times after 1990, they have decreased the cost for the development of new rocket engines. It was achieved by using existing units for new developed engines and minimizing the total number of engines and tests through the reasonable planning in the process for the experimental improvement of LRE. In addition, nowadays international cooperation in supplying LRE for commercial rocket and development of next generation LRE, such as 3 components engines and mathane engines, are proceeding.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.311-313
• /
• 2014

High pressure combustion with multiphase--liquid, gas, and supercritical phase--mixtures are widely used technology in the high efficiency liquid propellent rocket engine. This is the typical characteristics differentiate from the combustor of conventional air-breathing engines. Therefore, successful research of high pressure combustion at supercritical condition is essential to develope a high efficiency liquid rocket engine. Numerical studies have been carried out to explore capabilities of numerical method for LOx-CH4 non-premixed flames at high pressure. In this paper, corresponding numerical results are presented and compared with experimental result of MASCOTTE facility.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.111-119
• /
• 2013

Conceptual design of RBCC (Rocket Based Combined Cycle) engine is performed through the thermodynamic cycle analysis. The engine is designed to take off at sea level and accelerate to Mach 8 at 30 km altitude. According to the flight speed, the engine operating modes are categorized into 3 modes : Ejectorjet (~ Mach 3), Ramjet (Mach 3~6), Scramjet (Mach 6~8). As a design result, the engine has a diameter of 1 m and a length of 6.7 m. In the prediction results, its maximum thrust is 16.5 ton. In Ramjet and Scramjet modes, design condition of the engine intake influence the engine thrust according to the flight speed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.162-165
• /
• 2004

A layout of regenerative liquid rocket engine using turbo pump has been designed for development of high performance liquid rocket engine. each components of engine system was placed by considering assembly and characteristic. first stage engine system is controled by one plane of axis gimballing and composed of four engine assembly to cluster with launch vehicle. second stage engine system is controled by two plane of axis gimballing and composed of one engine assembly. assembly and disassembly processes and required program have been developed. various shape of instruments were also developed for carrying out assembly and disassembly process efficiently

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.71-84
• /
• 2007

The review of the liquid propellant rocket engine is presented. The combustion instabilities which were discovered on solid and liquid propellant rocket engines in 1930, have occurred on propulsion devices, such as gas turbine, ramjet, scramjet and rocket, and thus a study on the combustion instability became necessary. However, this problem has not been solved yet. Therefore, we investigated causes and mechanisms of the combustion instability and surveyed the efforts of solving combustion instability in various countries for developing stable liquid propellant rocket engines.