• 한국지반공학회지:지반
• /
• 제12권6호
• /
• pp.37-50
• /
• 1996

본 연구는 국내 고속도로의 암반사면의 현장조사를 실시하여 암반사면의 붕괴형상 및 특징을 암종 및 지질구조에 따라 분류하였으며 사면의 암종에 따른 붕괴규모, 붕괴시기 등을 분류하고 불안정한 사면에 영향을 주는 주요 지질구조에 대해 분석하였다. 연구결과, 붕괴 빈도가 높은 사면은 한반도의 남동측에 나타나는 중생대 백악기 퇴적암층과 경기일원 및 강원도 일원의 비교적 넓게 분포하고 있는 선캠브리아기의 편마암, 편암지대에 분포하는 것으로 나타났다. 암종에 따른 붕괴유형은 화성암이 낙석, 평면파괴, 토층유실, 원호파괴의 붕괴유형을 보이나 붕괴빈도가 비교적 낮고 퇴적암에서는 평면파괴가 우세하게 나타났으며 계일층의 차별적인 풍화에 의해 붕락형의 붕괴유형을 보이기도 하였다. 그리고 변성암에서는 암질불량으로 인한 원형파괴, 단층구조 및 엽리 등으로 인한 쐐기파괴, 평면파괴양상을 보였다. 지질구조에 따른 붕괴는 퇴적암에서는 주로 층리에 의해서는 붕괴가 발생되었으며 화성암에서는 절리, 그리고 변성암에서는 단층과 암질불량에 의한 붕괴가 우세한 것으로 나타났다.

• 한국지형학회지
• /
• 제23권1호
• /
• pp.1-16
• /
• 2016

This study estimates relationships between physical and chemical weathering indices of various rock types and topographical relief. Physical weathering properties such as rock strength and joint and chemical weathering indices such as the $SiO_2/Al2O_3$, CIA and WPI were analyzed from 18 rock outcrops in mountain and valley areas consisting of 9 rock types. The results indicate that the elevation and relief of topography increase physical strength of rock increases. It can be suggested that the total r(rock-mass strength rating) and R(rock rebound strength by Schmidt Hammer) are most useful indices as a quantitative weathering property factor to explain formative causes of topographical relief. The results also suggest that rock types such as sandstone, granite, gneiss and schist are most suitable to explain meaningful difference in topographical relief with the physical and chemical weathering indices.

• 터널과지하공간
• /
• 제34권1호
• /
• pp.28-53
• /
• 2024

원자력발전에 따라 필수적으로 발생하는 고준위방사성폐기물은 원자력발전이 시행된 나라 내 처분이 원칙이다. 고준위방사성폐기물의 심층처분을 위한 처분 지역과 모암의 결정은 과학적 방법뿐만 아니라 정치, 경제, 사회적으로 중요한 이슈이다. 현재까지 전 세계적으로 처분 모암으로 고려되는 암종은 결정질암, 퇴적암인 이암, 화산암인 응회암, 암염 등이 있다. 그러나 국내의 경우 지질학적으로 암염을 제외한 다양한 암종이 복잡하게 분포하고 있다. 본 논문에서는 고준위방사성페기물처분장의 처분 모암에 대한 다양한 암종 연구의 예비결과와 함께 전국규모의 지질학적, 암석역학적 특성을 분석하였을 뿐만 아니라, 후보 암종에 대한 심부 시추조사 사례들을 통하여 특성을 검토하고 처분 모암으로서 다양한 암종들의 가능성을 제시하고자 하였다. 또한 전국규모의 광역적 특성 분석, 문헌 조사, 상세 사례분석 등을 통하여 고준위방사성폐기물 심층처분을 위한 후보 암종으로 결정질암인 쥐라기 화강암과 백악기 퇴적암 중진주층과 진동층을 도출하였다. 그러나 본 논문에서 도출된 후보 암종들에 대해 연구된 자료의 양이 적기 때문에 처분심도, 지역적 특성, 다학제적인 검토 등에 대한 추가적이고 상세한 분석이 수행된 후 신중히 처분 암종이 결정되어야 할 것으로 사료된다.

• 한국환경복원기술학회지
• /
• 제7권2호
• /
• pp.12-20
• /
• 2004

This study was carried out from January 1998 to December 1999 to report the revegetation of cutting-rock slopes and a design standard in the highway cut-slopes. The field data was collected from the 67 sites cutting-rock slopes of highways, local roads, and field test. As the result of analyze, cutting-rock slopes revegetation measures were 16 types. There were Vine planting(3 types), Hydroseeding measures with seed-fertilizer-soil materials(5 types), Vegetaion-base spraying measures(5 types), and Stability measures(3 types). The factors affecting the plant coverage rates of cutting-rock slopes were the slope gradient, the slope width and direction. The plant coverage rate decreases in the condition of steep slope and long slope width and length(height). In addition, the plant coverage rates of the westward and southward were lower than that of the northward and eastward. Most dominant species were Zoysia japonica, Lespedeza cyrtobotrya, Lespedeza cuneata, Rubus crataegifolius, Miscanthus sinensis, Arrundinella hirta, Themeda triandra, and Oenothera odorata. Exotic species were Eragrostis curvula(Weeping lovegrass), Dactylis glomerata Orchardgrass), Lolium perenne(Perennial ryegrass), and Festuca arundinacea(Tall fescue). It is recommended to adjust the proposed factor as environment, topsoil, classification of rock, field condition and characteristic related with revegetation measures on slopes for the presentation of revegetation standard.

• 터널과지하공간
• /
• 제14권4호
• /
• pp.261-268
• /
• 2004

The main objectives of this study are to investigate the anisotropic characteristics of rocks and to evaluate the relationships between physical properties. A series of experiments were performed in three mutually perpendicular directions for three rock types, which are granite, granitic gneiss and limestone. The relationships of measured physical properties were evaluated. The results of ultrasonic wave velocity measurement show that granite of three rock types gives the largest directional difference, and that the wave velocity in a plane parallel to a transversely isotropic one is dominantly faster than that in a subvertical or vertical plane. It implies that ultrasonic wave velocity for rock could be used as a useful tool for estimating the degree of anisotropy. The ratio of uniaxial compressive strength to Brazilian tensile strength ranges approximately from 13 to 16 for granite. from 8 to 9 for granite gneiss, and from 9 to 18 for limestone. The directional differences for granite and granitic gneiss are very small, and on the other hand, is relatively large for limestone. It is suggested that strength of rock makes quite difference depending on the rock types and loading directions, especially for the anisotropic rocks such as transversely isotropic or orthotropic rocks. The ratio of uniaxial compressive strength to point load strength index ranges from 18 to 20 for granite, from 17 to 19 for granitic gneiss, and from 21 to 24 for limestone. These results show that point load strength index makes also a difference depending on rock types and directions. Therefore. it should be noted that the ratio of uniaxial compressive strength to point load strength index could be applied to all rock types. Uniaxial compressive strength shows relatively good relationship with point load strength index, Schmidt hammer rebound value, and tensile strength. In particulat, point load strength index is shown to be the best comparative relationship. It is indicated that point load test is the most useful tool to estimate an uniaxial compressive strength indirectly.

• 한국소프트웨어감정평가학회 논문지
• /
• 제15권1호
• /
• pp.63-70
• /
• 2019

최근 딥 러닝(Deep leaning)을 이용한 이미지 인식 분야의 연구가 활발히 진행되고 있다. 본 연구에서는 육안으로 관찰하여 분류하기 어려운 암석을 이미지만으로 분류하기 위해 딥 러닝 오픈 소스 프레임워크인 Tensorflow 기반의 CNN모델을 사용하여 고등학교 교육과정에서 다루는 암석 18종(화성암 6종, 변성암 6종, 퇴적암 6종)의 이미지를 통해 암석을 분류하는 시스템을 제안한다. 암석의 이미지를 학습시켜 암석을 구별하는 분류기를 개발하여 분류 성능을 확인하였으며 최종적으로 구현한 모바일 어플리케이션을 통해 교실 내 학습 또는 현장체험학습 등에서 학생들의 학습 보조도구로서 사용할 수 있다.

• 한국지반환경공학회 논문집
• /
• 제16권2호
• /
• pp.33-43
• /
• 2015

This paper investigated the magnitude and distribution of earth pressure on the support system in jointed rock mass by considering different earth pressure coefficients, rock types and joint inclination angles. The study mainly focused on the effect of the earth pressure coefficients on the earth pressure. Based on a physical model test (Son & Park, 2014), extended studies were conducted considering rock-structure interactions based on the discrete element method, which can consider the joints characteristics of rock mass. The results showed that the earth pressure was highly influenced by the earth pressure coefficients as well as the rock type and joint inclination angles. The effects of the earth pressure coefficients increased when the rock suffered more weathering and has no joint slide. The test results were also compared with Peck's earth pressure for soil ground, and clearly showed that the earth pressure in jointed rock mass can be greatly different from that in soil ground. This study indicated the earth pressure coefficients considering the rock types and joint inclination angles are important parameters influencing the magnitude and distribution of earth pressure, which should be considered when designing the support systems in jointed rock mass.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.239-248
• /
• 2018

TBM penetration rate is a function of intact rock properties, rock mass conditions and TBM operational parameters. Machine rate of penetrationcan be predicted by knowledge of the ground conditions and its effects on machine performance. The variation of TBM operational parameters such as penetration rate and thrust plays an important role in its performance. This study presents the results of the analysis on the TBM penetration rates in schistose rock types present along the alignment of Golab tunnel based on the analysis of a TBM performance database established for every stroke through different schistose rock types. The results of the analysis are compared to the results of some empirical and theoretical predictive models such as NTH and QTBM. Additional analysis was performed to find the optimum thrust and revolution per minute values for different schistose rock types.

• 한국콘텐츠학회논문지
• /
• 제16권11호
• /
• pp.549-559
• /
• 2016

본 논문은 록 뮤지컬이라는 용어가 지나치게 무분별하게 사용되고 있는 현 시점에, 이 용어에 대한 학문적 정의와 양식적 특성의 규명을 위해 쓰여졌다. 이를 위해 본 논문은 록 음악 및 록 뮤지컬의 역사적 맥록에 대한 이해와 더불어, 록 뮤지컬의 음악 및 극의 특성에 대한 이해를 시도한다. 아울러 본 논문은 60년대 대두된 정통 록 뮤지컬의 음악 및 정신을 계승한 뮤지컬 <렌트>에 사용된 노래들에 대한 유형화 ( 1) 정통 록뮤지컬, 2) 다른 음악 유형의 록적 변형, 3) 록 음악과 다른 음악의 혼합) 를 통해 새로운 록 뮤지컬을 창작하기 위해서는 텍스트에 부합하는 록 음악의 적절한 활용과 혼용이 필요함을 논의해 본다.

• 한국지형학회지
• /
• 제28권1호
• /
• pp.1-12
• /
• 2021

This study tried to reveal relative surface denudation resistance and ranking by geologic types in the Southern Korean Peninsula using an 1:250,000 digital geologic map and ASTER GDEM. Among rock types such as igneous, sedimentary and metamorphic rocks, metamorphic rock showed the greatest resistance to surface denudation. The most resistant rock to surface denudation by geologic periods (e.g., the Precambrian, Paleozoic, Mesozoic and Cenozoic) was found from the Precambrian. Among the major tectonic settings in the Southern Korean Peninsula such as the Gyeonggi massif, Okcheon belt, Yeongnam massif, Gyeongsang basin and Pohang basin, the Okcheon belt indicated the greatest resistance. The most and least resistant rocks from the representative nine rocks in the Southern Korean Peninsula were Paleozoic limestone, and Cretaceous sedimentary rock and Cenozoic sedimentary rock, respectively. This study suggests that Paleozoic limestone, Cretaceous volcanic rock, Paleozoic sedimentary rock and Precambrian gneiss can be regarded as hard rocks with high elevation, steep slope and complicated relief, while soft rocks with low elevation, gentle slope and simple relief are Jurassic granite, Cretaceous sedimentary rock and Cenozoic sedimentary rock.