• 제목/요약/키워드: Rock Mass Strength

검색결과 287건 처리시간 0.02초

암석의 온도의존성을 고려한 열-수리-역학적 상호작용의 수치해석적 연구 (Numerical Study on Thermo-Hydro-Mechanical Coupling in Rock with Variable Properties by Temperature)

  • 안형준;이희근
    • 터널과지하공간
    • /
    • 제7권1호
    • /
    • pp.13-19
    • /
    • 1997
  • It is necessary to study on thermo-hydro-mechanical effect at rock mass performing project such as radiowaste disposal in deep rock mass. In this study, thermo-hydro-mechanical coupling analysis which is considered interaction and the variation of rock properties induced by temperature increase was performed for the circular shaft when appling temperature of 20$0^{\circ}C$ at the shaft wall. The shaft is diameter of 2 m and under hydrostatic stress of 5 MPa. In the cases, thermal expansion by temperature increase progress from the wall to outward and thermal expansion could induce tensile stress over the tensile strength of rock mass at the wall. When rock properties were given as a function of temperature, thermal expansion increased, tensile stress zone expanded. Lately, water flow is activated by increase of permeability and decrease of viscosity.

  • PDF

동결융해 심도를 고려한 암반사면의 안정성 해석에 관한 연구 (Stability Analysis of Rock Slope with Consideration of Freezing-Thawing Depth)

  • 백용
    • 지질공학
    • /
    • 제11권1호
    • /
    • pp.13-23
    • /
    • 2001
  • 도로나 철도 변에 나타나는 암반사면은 외부 기온에 영향을 받아 동절기부터 이른봄에 걸쳐 동결융해작용을 반복해서 받는다. 본 연구의 목적은 불연속성 암반이 동결융해작용을 반복하여 받을 경우 열화현상을 겪게 되고 이에 따른 암반의 안정성이 어떻게 변화되는가를 해석한다. 해석방법으로는 균질화법을 이용하여 불연속성 암반의 강도특성을 밝히고 파괴기준으로는 드러커-플래커 기준을 이용한다. 또한 실제 암석의 열화특성은 응회암을 채취하여 실내 동결융해실험에 의하여 열화특성을 정량화 하여 암반의 안정성 해석의 기초 자료로 이용한다. 현장사면에서 동결융해에 의한 열화의 깊이를 추정하기 위하여 일차원 열전도 방정식을 이용하여 온도에 영향을 받는 깊이를 구한다. 모델 사면의 동결융해 깊이를 결정한 후 모델 암반사면에서 암반의 강도 값의 변화양상을 해석한다. 암반의 작용하는 외력은 자중에 의한 중력만이 작용한다고 가정하고 안전율 해석을 실시한다. 그 결과 암반의 안정성 변화양상을 정량적으로 분석한다. 대상으로 하는 두 도시의 경우 동결융해 영향을 받는 깊이는 1.0m 내외 였으며 10년 경과 후에는 암반의 붕괴 조짐을 나타나는 것을 추측할 수 있다.

  • PDF

합성암반체 접근법에 대한 고찰 (Review of the Synthetic Rock Mass Approach)

  • 박철환;신중호;박의섭
    • 터널과지하공간
    • /
    • 제17권6호
    • /
    • pp.438-447
    • /
    • 2007
  • 본 기술보고서는 Lisbon에서 개최된 2007 ISRM Congress에서 발표된 논문을 소개한 것이다. 이는 SRM(합성암반체)에 관한 연구결과이며, 이의 중요성과 향후 잠재력을 강조하고 있는 Fairhurst 교수가 직접 발표한 논문이다. 절리 암반의 특성을 규명하는 SRM 접근법은 현존하는 경험적 접근법이나 절리 암반의 거동에 대한 현재의 이해정도와 관련지어 재검토된다. 이 재검토 논문에서 절리 암반의 역학적 거동에 영향을 미치는 주요 요소들이 어떻게 고려되는가를 기술하며, 또 SRM 접근법이 상당히 발전되어 현장에 적용된 사례를 보여준다. PFC-3D에서 BP 모델링과 DFN 모사법 등의 두개의 잘 정립된 방법에 기초를 두고 있는 이 기법은 새로운 미끄러지는 절리모델을 사용한다. 이 모델은 모든 응력경로에 의하여 힘을 받고 있는 수천개의 기존 절리를 포함하는 대규모 암반체를 모사할 수 있게 하는 것이다. 암반의 강도 및 취성도, 완전 순응 행렬의 전개, 그리고 초기의 파쇄 등이 SRM 시험에서 얻어지는 결과이다.

Bearing capacity of foundation on rock mass depending on footing shape and interface roughness

  • Alencar, Ana S.;Galindo, Ruben A.;Melentijevic, Svetlana
    • Geomechanics and Engineering
    • /
    • 제18권4호
    • /
    • pp.391-406
    • /
    • 2019
  • The aim of this paper was to study the influence of the footing shape and the effect of the roughness of the foundation base on the bearing capacity of shallow foundations on rock masses. For this purpose the finite difference method was used to analyze the bearing capacity of various types and states of rock masses under the assumption of Hoek-Brown failure criterion, for both plane strain and axisymmetric model, and considering smooth and rough interface. The results were analyzed based on a sensitivity study of four varying parameters: foundation width, rock material constant (mo), uniaxial compressive strength and geological strength index. Knowing how each parameter influences the bearing capacity depending on the footing shape (circular vs strip footing) and the footing base interface roughness (smooth vs rough), two correlation factors were developed to estimate the percentage increase of the ultimate bearing capacity as a function of the footing shape and the roughness of the footing base interface.

ROCK TEST HAMMER 측정결과의 활용에 관하여 (A Study on the Application of Measured Results by Rock Test Hammer)

  • 이영남;윤지선;김두영
    • 터널과지하공간
    • /
    • 제3권2호
    • /
    • pp.167-174
    • /
    • 1993
  • Index tests are useful because they are rapid and cheap-and if bias is known the fundamental property can be estimated, as when estimating the compressive strength or the tensile sterngth from the rock test hammer value. Index tests which have proved to be very useful are the rock test hammer, the point load test and sonic velocity test. These can provide index values in their owing right or be used to estimate the compressive strength, the tensile strength and elastic modulus. Because of the heterogeneous and fractured nature of rock, many index tests have been developed for a variety of purposes, e.g.for use in rock mass classification schemes.

  • PDF

암반에 설치된 송전철탑 심형기초의 주면마찰력 평가 (Side Friction of Deep Foundation for Transmission Tower in Rock)

  • 김대홍;이대수;천병식;김병홍
    • 한국지반공학회논문집
    • /
    • 제23권4호
    • /
    • pp.149-160
    • /
    • 2007
  • 본 논문에서는 송전철탑 심형기초의 주면마찰력을 평가하고자 충북 음성지역의 편마암에 대해 총 6회(1/8규모 5회, 1/2규모 1회) 현장시험을 실시하였다. 시험결과 파괴형태는 기초체와 암반의 마찰파괴가 아닌 굴착으로 인한 손상된 주변암반 및 기존암반의 절리상태에 지배되는 것으로 나타났으며, 주면마찰력 평가결과 기존의 송전철탑 심형기초에 적용하고 있는 값보다 약 20$\sim$30% 증가되는 것을 확인할 수 있었다. 또한 기초타설시 사용되는 라이너플레이트의 영향을 살펴보고자 기존 철탑 기초에 대해 시추조사를 4회 실시하였다. 라이너플레이트 배면콘크리트의 압축강도는 타설시 설계강도의 63$\sim$72%였으며, 주면마찰력의 설계기준치를 만족하는 것으로 나타났다.

현장타설말뚝의 암반 근입부 암판정 사례연구 (Study on Rock classification of Rock Socketed Drilled Shaft)

  • 박완서;유재현;이우철;주용선
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.658-663
    • /
    • 2010
  • Recently the most of deep foundation were socketed into weathered rock or soft rock to carry large foundation loads. The end bearing behavior of piles socketed in rock is generally dependent on the rock mass conditions with discontinuities and rock strength. Therefore, it is very important that the estimating rock classification with relation of TCR, RQD and unpredicted rock condition. In this study, the construction failure example of drilled shaft due to mistaking to estimate the rock classification on penetration were analyzed in site, so we hope to discuss problems of determining the rock socketed length of drilled shaft on construction.

  • PDF

RQD의 3차원분포 도시화와 변화특성에 관한 연구 및 현장적용 검토 (A Study on Graphical Determination of RQD variation in 3-D Space and Its Application into Field Survey Data)

  • 최시영;박형동
    • 터널과지하공간
    • /
    • 제11권4호
    • /
    • pp.311-318
    • /
    • 2001
  • RQD는 암반의 파쇄정도를 평가하고 암반분류의 변수로서 중요하나 이방성 및 산정길이에 따른 오차를 내포하고 있다. 따라서 보다 정확하게 토목시공 대상암반의 RQD를 평가하기 위해서는 3차원공간에서치 RQD 변화특성을 파악하는 것이 중요하다. 본 연구에서는 등각평사투영망상에 RQD의 3차원적 분포를 도시하고 산정길이와 절리빈도에 따른 RQD의 오차 정도를 파악하고자 하였으며 이후 설계과정에서의 영향을 검토하고 또한 이를 국내현장에 적용하여 보았다. 이러한 시도는 지질조사 결과를 보다 정확하게 설계 및 시공에 반영하고 이후 시공과정에서의 지질조사에도 적용할 수 있을 것으로 기대된다.

  • PDF

다변량분석을 이용한 터널에서의 효율적인 암반분류에 관한 연구 (A Study of Efficient Rock Mass Rating for Tunnel Using Multivariate Analysis)

  • 위용곤;노상림;윤지선
    • 한국터널지하공간학회 논문집
    • /
    • 제2권2호
    • /
    • pp.41-49
    • /
    • 2000
  • 지하 터널 굴착 등의 암반 공학적 문제에 있어서 암반분류가 널리 적용되고 있다. 하지만, 조사 방법이 체계화되어 있지 않아서 터널 지질 전문가라 할지라도 암반분류에 어려움이 많은 문제점을 가지고 있다. 본 연구에서는 다변량분석을 이용하여 객관적이고 사용하기 간편한 암반분류법을 제시하였다. RMR 요소는 RQD, 절리상태, 지하수, 강도, 보정, 절리간격 순으로 중요도가 결정되었으며, 각각의 단계에서 RMR에 관한 최적의 다중회귀모형식을 제시하였다.

  • PDF

수압에 의한 암반의 물성 저하가 갱도의 안정성에 미치는 영향 (Effect of Degradation of Rock Mass Properties Caused by Water Pressure on the Stability of Mine Gallery)

  • 윤용균;백영준;조영도
    • 터널과지하공간
    • /
    • 제21권2호
    • /
    • pp.138-144
    • /
    • 2011
  • 광산이 폐광을 하는 경우 배수시스템을 정지함으로 인해 갱도는 물로 포화된다. 갱도가 포화되었을 때 갱도 주변의 암석은 완전히 포화되고 갱도 주변 암반에는 수압이 작용한다. 암석의 일축압축강도는 함수율에 따라 달라지며 함수율이 증가함에 따라 감소한다. 수압은 암석 내 균열이나 암반 내 불연속면의 확장을 유발하게 된다. 갱도 내 포화된 수압이 지보압을 발휘할 수도 있지만 지하수에 의해 발생한 암반 물성의 저하는 갱도의 안정성을 감소시킬 것이다. 본 연구에서는 수압에 의해 발생한 갱도 주변 암반의 물성 저하가 갱도의 안정성에 미치는 영향을 평가하기 위하여 2차원 불연속해석과 3차원 연속해석을 실시하였다. 수치해석 결과 수압에 의해 유발된 갱도 주변 암반의 물성 저하는 갱도 주변 암반의 변위 증가에 영향을 미치고, 2차원 해석 결과는 3차원 해석 결과 보다 큰 변위를 나타냈다.