• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권2호
• /
• pp.155-160
• /
• 2006

In the paper a robust indirect adaptive fuzzy controller is proposed for balancing and position control of the inverted pendulum system. Because balancing control rules of the pendulum and position control rules of the cart can be opposite, it is difficult to design an adaptive fuzzy controller that satisfy both objectives. To stabilize the pendulum at a specified position, the proposed fuzzy controller consists of a robust indirect adaptive fuzzy controller for balancing and a supervisory fuzzy controller which emulates heuristic control strategy and arbitrate two control objectives. It is proved that the signals in the overall system are bounded. Simulation results are given to verify the proposed adaptive fuzzy control method.

• Journal of Power Electronics
• /
• 제7권2호
• /
• pp.159-173
• /
• 2007

In this paper, an intelligent sliding-mode position controller (ISMC) for achieving favorable decoupling control and high precision position tracking performance of permanent-magnet synchronous motor (PMSM) servo drives is proposed. The intelligent position controller consists of a sliding-mode position controller (SMC) in the position feed-back loop in addition to an on-line trained fuzzy-neural-network model-following controller (FNNMFC) in the feedforward loop. The intelligent position controller combines the merits of the SMC with robust characteristics and the FNNMFC with on-line learning ability for periodic command tracking of a PMSM servo drive. The theoretical analyses of the sliding-mode position controller are described with a second order switching surface (PID) which is insensitive to parameter uncertainties and external load disturbances. To realize high dynamic performance in disturbance rejection and tracking characteristics, an on-line trained FNNMFC is proposed. The connective weights and membership functions of the FNNMFC are trained on-line according to the model-following error between the outputs of the reference model and the PMSM servo drive system. The FNNMFC generates an adaptive control signal which is added to the SMC output to attain robust model-following characteristics under different operating conditions regardless of parameter uncertainties and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed intelligent sliding mode position controller. The results confirm that the proposed ISMC grants robust performance and precise response to the reference model regardless of load disturbances and PMSM parameter uncertainties.

• 한국지능시스템학회논문지
• /
• 제26권2호
• /
• pp.127-134
• /
• 2016

본 논문에서는 원판의 반작용을 이용하는 역진자의 강인 자세 제어를 위한 강인 제어 기법을 소개한다. 이를 위해 원판 반작용을 이용하여 자세 조정이 가능한 시스템을 설계한다. 설계된 시스템의 수학적 모델을 구하고 그 수학적 모델을 이용하여 제어기를 설계한다. 설계한 강인 제어 기법은 두 부분으로 구성되어 있다. 초기에는 역진자의 swing up을 위한 수동성 기반의 제어기(passivity based control)를 사용하고 역진자의 자세가 수직 위치 근방에 오면 강인 안정화 제어기로 제어기를 변경한다. 강인 안정화 제어기가 필요한 이유는 역진자 시스템에서 관성 모멘트를 불확실성을 다루기 위함이다. 모의 실험과 실제 실험을 통해 제안하는 제어기가 효과적으로 원판 반작용에 기반한 역진자의 자세 제어를 달성함을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.451-456
• /
• 1991

A robust position control scheme for DC Motor is proposed based on Fuzzy Acceleration Control. Proposed control system has the similar structure that Y. Hori proposed. But the PI type acceleration controller of it is replaced by Fuzzy Logic Controller(FLC) which is known to be robust to the operating point and parameter variations. By the simulation study for a real DC Motor, we have slowed the superiority to the continuous PI acceleration controller in the view point of robustness to the operating point and parameter variations.

• 한국전자통신학회논문지
• /
• 제3권4호
• /
• pp.266-275
• /
• 2008

본 논문에서는 전동기 파라미터와 부하에 강인한 속도 특성을 위해 디지털 IP제어를 이용한 BLDC 전동기의 센서리스 속도제어 방식을 제안한다. 단자 전압을 이용한 BLDC 전동기의 센서리스 구동시 회전자 위치 추정을 위해 아날로그 필터를 사용하기 때문에 부하나 속도에 영향을 받는다. 전동기 파라미터에 둔감하고 부하의 영향에도 강건한 센서리스 속도제어를 하기 위해서는 정확한 회전자 위치 추정과 연동하는 강인한 속도 제어기가 필요하다. 본 논문에서는 디지털 IP제어를 이용하여 부하의 변동에도 강인한 정속제어와 일정 부하로 운전 중 가감속시 임의의 속도변화에 대해 BLDC 전동기의 안정된 센서리스 제어가 가능하도록 구성하였다. 이에 대한 타당성은 실험을 통하여 입증하고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.289-293
• /
• 2004

The sensorless speed control technique for BLDCM using digital IP control is proposed in this paper for advanced speed characteristic which is robust for loads. The sensorless drive of BLDCM using terminal voltages is affected by load or speed because it uses analog filters to estimate the rotor position. For this reason, the robust speed controller with the accurate rotor position estimator is needed for sensorless control which is robust to load and insensitive to motor parameters. The constant speeds robust to load variation and the stable sensorless control of BLDCM robust to the increase or decrease of speed with constant load are implemented using digital IP control in this paper. The validity to these is established with experimentation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.117-123
• /
• 2000

A new control method for precision robust position control of a PMSM (Permanent Magnet Synchronous Motor) using asymptotically stable adaptive load torque observer is presented in the paper. Precision position control is obtained for the PMSM system approximately linearized using the field-orientation method. Recently, many of these drive systems use the PMSM to avoid backlashes. However, the disadvantages of the motor are high cost and complex control because of nonlinear characteristics. Also, the load torque disturbance directly affects the motor shaft. The application of the load torque observer is published in [1] using fixed gain. However, the motor flux linkage is not exactly known for a load torque observer. There is the problem of uncertainty to obtain very high precision position control. Therefore, a model reference adaptive observer is considered to overcome the problem of unknown parameter and torque disturbance in this paper. The system stability analysis is carried out using Lyapunov stability theorem. As a result, asymptotically stable observer gain can be obtained without affecting the overall system response. The load disturbance detected by the asymptotically stable adaptive observer is compensated by feedforwarding the equivalent current which gives fast response. The experimental results are presented in the paper using DSP TMS320c31.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.140-146
• /
• 1995

In case the uncertainty existing in a system is assumed to satisfy the matching condition and to be come-bounded. Y. H. Chen proposed an adaptive robust control algorithm which introduced adaptive sheme for a design parameter into robust deterministic controls. In this paper, the adaptive robust control algorithm is applied to the position tracking control of direct drive robots, and simulation and experimental studies are conducted to evaluate control performance.

• 동력기계공학회지
• /
• 제21권6호
• /
• pp.101-109
• /
• 2017

The pneumatic driving system has advantages such as high output power per weight and low heat generation rate. However, it is difficult to control the position because of its strong non-linearity such as large friction forces compared to driving force, and heat transfer characteristics that change during operation. Therefore, in order to achieve the control objectives, a robust controller should be designed considering modeling error and model uncertainty. In this paper, a sliding mode controller is designed to improve the position control performance of pneumatic cylinder driving system. Experimental results show that the designed controller achieves the designed control objectives even if the model of the cylinder driving system, such as the initial pressure inside the cylinder and the initial position of the piston is changed.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1371-1381
• /
• 1995

A novel hybrid control scheme to actively control the endpoint position of a very flexible single-link manipulator is proposed. The control scheme consists of a motor mounted at the beam hub and a piezofilm actuator bonded to the surface of the flexible link. The control torque of the motor to produce a desired motion is firstly determined by employing the sliding mode control theory on the equation of motion of the rigid link having the same mass as that of the proposed flexible link. The torque is then applied to the flexible manipulator in order to activate the commanded motion. During the motion, undesirable oscillation is actively suppressed by applying a feedback control voltage to the piezofilm actuator. Consequently, the imposed desired position is accomplished. In order to demonstrate high control performances accrued from the proposed method, computer simulations are undertaken by treating both regulating and tracking control problems.