• 한국안전학회지
• /
• 제14권4호
• /
• pp.108-113
• /
• 1999

This paper presents a study on fuzzy speed and flux controller used in a vector control of a CRPWM(Current Ragulated PWM) induction motor drive. In this paper, an approach for an easier design of the fuzzy controller is presented in order to obtain the desired value for the response time with minimal overshoot and to improve the steady state performance for speed step commands. The fuzzy controller is constructed only upon the knowledge of the motor behaviour and the desired speed response, and provides fast and robust control by reducing the effects of nonlinearities, parameter changes and load disturbance. The results of applying the fuzzy logic controller to an IM drive system are compared with those obtained by application of a conventional PI controller. The fuzzy controller provided a better response than the PI controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.64.2-64
• /
• 2002

Contents 1. Introduction $\textbullet$ Contents 2. System description $\textbullet$ Contents 3. Desired feedback control and function approximation $\textbullet$ Contents 4. Robust adaptive controller design $\textbullet$ Contents 5. Simulation study $\textbullet$ Contents 6. Conclusion

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.457-460
• /
• 1989

This note considers the problems of finding a pole assignment controller for a plant with parameter perturbations. Based on Kharitonov's theorem and its generalized results, we propose a design method of controller using linear transformations such that it guarantees the desired damping ratio.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.159-162
• /
• 1997

This paper describes robust stabilization of nonlinear single-input uncertain systems without matching conditions. We consider nonlinear systems with a vector of unknown constant parameters perturbed about a known value. The approach utilizes the generalized controller canonical form to lump the unmatched uncertainties recursively into the matched ones. This can be achieved via nonlinear coordinate transformations which depend not only on the states of the nonlinear system but also on the control input. Then the dynamic robust control law is derived and the stability result is also presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1197-1200
• /
• 1996

This paper is concerned with the design of robust state feedback controller for a class of linear time-delay systems with norm-bounded nonlinear uncertainties. Under the proposed delay-independent criterion, asymptotic stability for the system is investigated using the conventional Lyapunov method. Moreover, the robust controller can be obtained by solving the linear matrix inequality which is equivalent to the suggested conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.362-366
• /
• 1986

Using simple linear prediction algorithm a design procedure of robust PI and PID controllers for SISO system, usually called 'PID predictor controllers, is developed. The design procedure is able to properly adjust gain margin and phase margin and control coefficients are selected in frequency domain. The performance of the PID predictor controller is superior to that of the normal PID controller in terms of robustness in design and disturbance rejection.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.64.6-64
• /
• 2002

This paper presents a procedure of implementing a robust controller for a paper-making plant in DCSs. A paper-making process generally has triple problems to automatically tune its output qualities : Long transport delays which are not able to be simply linearized. The transfer matrix of the process is not square. And every plant model has some uncertainty in low and middle frequency region. To tackle these problems, a multi-input / multi-output (MIMO) plant model having some uncertainty was derived by considering some physical and mechanical principles of the process. Then a MIMO robust \ulcornercontroller is designed and implemented in a real DCS as function block type. Som...

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3560-3572
• /
• 1996

This paper presents a new discrete-time fuzzy-sliding mode controller for robust vibration control of a smart structure featuring a piezofilm actuator. A governong equation of motion for the smart beam structure is derived and discrete-time codel with mismatched uncertainties such as parameter variations is constructed ina state space. A discrete-time sliding mode control system consisting of an equivalent controller and a discontinuous controller is formulated. In the design of the equivalent part, so called an equivalent controller separation method is adopted to achieve vzster convergence to a sliding surface without extension of a sliding region, in which the system robustness maynot be guaranteed. On the other hand, the discontinuous part is constructed on the basis of both the sliding and the convergence conditions using a time-varying feedback gain. The sliding moide controller is then incorporated with a fuzzy technique to appropriately determine principal control parameters such as a discountinuous feedback gain. Experimental implementation on the forced and random vibraiton controls is undertaken in order to demonstrate superior control performance of the proposed controller.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.30-39
• /
• 2002

본 논문에서는 전력동요 억제를 위한 TCSC의 강인한 LQG/LTR (Linear Quadratic Gaussian with Loop Transfer Recovery) 제어기 설계에 관한 연구를 하였다. LQG/LTR 제어기를 설계할 때 성능을 극대화하기 위해서는 여러 단계의 파라미터 조정을 하여야 한다. 이에 본 논문에서는 다 변수 LQG/LTR 안정화 제어기 선계를 체계적으로 할 수 있는 방법을 제안하였다. 설계된 제어기를 실제의 비선형 전력시스템에 적용함으로써 전력동요억제 효과를 검증하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.76-83
• /
• 2000

A study on the robust control of a composite beam with a distributed PVDF sensor and piezo-ceramic actuator is presented in this paper. $1^{st}$ and $2^{nd}$ natural frequencies are considered in the modeling, because robust control theory which has robustness to structured uncertainty is adopted to suppress the vibration. If the controllers designed by $H_{\infty}$ theory do not satisfy control performance, it is improved by $\mu$-synthesis method with D-K iteration so that the $\mu$-controller based on the structured singular value satisfies the nominal performance and robust performance. Simulation and experiment were carried out with the designed controller and the verification of the robust control properties was presented by results.