• 한국소음진동공학회논문집
• /
• 제13권11호
• /
• pp.860-867
• /
• 2003

This paper presents a systematic method measuring a velocity disturbance to design the robust seek loop system of optical disk drives. The velocity disturbance caused by the rotation of a disk has a greater influence on the performance of the seek control loop as the rotational speed increases. Thus, it needs to measure the extent of the velocity disturbance and design the seek control loop based on the measured data. The measurement method of the velocity disturbance is a real-time . method using a measurable velocity and a velocity controller output and is a robust method considering actuator uncertainties. The loop gain adjustment algorithm is introduced to compensate for the actuator uncertainties. The proposed method is implemented by an experimental digital system and is evaluated through an experiment.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권1호
• /
• pp.11-16
• /
• 2005

This paper considers a robust observer-based H/sub ∞/ controller design method for singular systems with parameter uncertainties using an LMI condition. The sufficient condition for the existence of controller and the controller design method are presented by a perfect LMI condition in terms of all variables using singular value decomposition, Schur complement, and change of variables. Therefore, one of the main advantages is that a robust observer-based H/sub ∞/ controller can be established by solving one LMI condition compared with existing results. Numerical example is given to illustrate the effectiveness of the proposed controller design method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.227-230
• /
• 1998

In this paper, we propose the design method of fuzzy robust H$\infty$ controller for the uncertain nonlinear discete-time systems with time delay. First, we represent a nonlinear plant with a modified T-S(Takagi-Sugeno) fuzzy model. Then design method utilizing the concept of PDC (parallel distributed compensation) is employed. For the modified T-S fuzzy model with uncertainty and delay, the sufficient condition of the quadratic stabilization with an H$\infty$ norm bound is presented in terms of Lyapunov stability theory and fuzzy robust H$\infty$ controller design method is given by LMI(linear matrix inequality) approach. Also an illustrative example is given to demonstrate the result of the proposed method.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권1호
• /
• pp.39-49
• /
• 2002

This paper presents a robust tracker design method that is specific to the trajectories of target aircraft. This method assumes that representative trajectories of the target aircraft are available. The exact trajectories known to the tracker enables the incorporation of the exact data in the tracker design instead of the measurement data. An estimator is designed to have acceptable performance in tracking a finite number of different target trajectories with a capability to trade off the mean and maximum errors between the exact trajectories and the estimated or predicted trajectories. Constant estimator gains that minimize the cost functions related to the estimation or prediction error are computed off-line from an iterative algorithm. This tracker design method is applied to the longitudinal motion tracking of target aircraft.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.553-559
• /
• 1999

The robust control problem of the linear systems with uncertainty is classified as the robust stability problem guaranteeing the stability and the robust performance problem guaranteeing the disired performance. In this paper, we considered the robust performance analysis problem, which find the upper buund of the quadratic performance of the uncertain linear system, and the robust guaranteed performance controller design problem which design a controller guaranteeing the desired quadratic performance. At first, we treated the analysis problem and presented the two results; one is dependent on the performance of the nominal system and another is independent on this. And we treated the design method guaranteeing the desired performance for the uncertain linear systems, Finally, we show the usefulness of our results by numerical examples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1955-1957
• /
• 2001

This paper propose the design method of robust tracking controller for nonlinear TS fuzzy system with uncertainties. The robust tracking controller design is presented by constraint of robust stability for nonlinear system. A sufficient condition of the robust stability is presented by LMI(Linear Matrix Inequality) soltuion in the sense of Lyapunov for TS fuzzy system with uncertainties. The effectiveness of the proposed robust tracking con design is demonstrated through a numerical simulatio.

• Structural Engineering and Mechanics
• /
• 제76권4호
• /
• pp.529-540
• /
• 2020

Concurrent topology optimization of macrostructure and microstructure has attracted significant interest due to its high structural performance. However, most of the existing works are carried out under deterministic conditions, the obtained design may be vulnerable or even cause catastrophic failure when the load position exists uncertainty. Therefore, it is necessary to take load position uncertainty into consideration in structural design. This paper presents a computational method for robust concurrent topology optimization with consideration of load position uncertainty. The weighted sum of the mean and standard deviation of the structural compliance is defined as the objective function with constraints are imposed to both macro- and micro-scale structure volume fractions. The Bivariate Dimension Reduction method and Gauss-type quadrature (BDRGQ) are used to quantify and propagate load uncertainty to calculate the objective function. The effective properties of microstructure are evaluated by the numerical homogenization method. To release the computation burden, the decoupled sensitivity analysis method is proposed for microscale design variables. The bi-directional evolutionary structural optimization (BESO) method is used to obtain the black-and-white designs. Several 2D and 3D examples are presented to validate the effectiveness of the proposed robust concurrent topology optimization method.

• Journal of Computational Design and Engineering
• /
• 제3권3호
• /
• pp.179-190
• /
• 2016

A kind of modified epoxy resin sheet molding compounds of the impeller has been designed. Through the test, the non-metal impeller has a better environmental aging performance, but must do the waterproof processing design. In order to improve the stability of the impeller vibration design, the influence of uncertainty factors is considered, and a multi-objective robust optimization method is proposed to reduce the weight of the impeller. Firstly, based on the fluid-structure interaction, the analysis model of the impeller vibration is constructed. Secondly, the optimal approximate model of the impeller is constructed by using the Latin hypercube and radial basis function, and the fitting and optimization accuracy of the approximate model is improved by increasing the sample points. Finally, the micro multi-objective genetic algorithm is applied to the robust optimization of approximate model, and the Monte Carlo simulation and Sobol sampling techniques are used for reliability analysis. By comparing the results of the deterministic, different sigma levels and different materials, the multi-objective optimization of the SMC molding impeller can meet the requirements of engineering stability and lightweight. And the effectiveness of the proposed multi-objective robust optimization method is verified by the error analysis. After the SMC molding and the robust optimization of the impeller, the optimized rate reached 42.5%, which greatly improved the economic benefit, and greatly reduce the vibration of the ventilation system.

• 소성∙가공
• /
• 제10권6호
• /
• pp.493-499
• /
• 2001

An optimal robust design methodology has been developed to minimize warpage in injection-molded pats. The response surface methodology was applied to obtain a functional relationship between design variables and warpage value, and the modified complex method was used as an optimization tool to search for an optimal design solution over prescribed design region. To attain robustness against process variations, Taguchi's SN ratio was introduced as the design metric. The proposed optimal design procedure was applied to an actual part, the Guide-ASF model of a fax machine, and the usefulness of the methodology was shown through the CAE simulation using a commercial injection molding software package.

• 산업기술연구
• /
• 제15권
• /
• pp.209-215
• /
• 1995

In this paper, a controller design method for uncertain linear systems by output feedback is proposed. This method utilizes the LQG/LTR procedure for systems with uncertainties described in the time domain. It is assumed that the uncertainties satisfy the matching conditions and their bounds are known. First, a robust state feedback controller design method is introduced. Then, it is asymtotically recovered for the output feedback system by the loop transfer recovery(LTR) method under a certain condition.