• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.322-326
• /
• 1990

The solution of problems in the automation of mold manufacturing process are high speed and resolution. To catch two problems at once, digital servo system will be essential replacing the analog servo system. In this paper, we tried some hardware/software approach including, designing basic structure, modeling of servo actuator, and designing & simulating of velocity & position controller. Finally, we constructed the hardware for 1 axis digital servo controller of NC system. As a result we obtained the design technics of digital servo systems for high speed NC system.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.281-292
• /
• 2006

The design and implementation of Generalized Minimum Variance control laws for nonlinear multivariable systems that can include severe nonlinearities is considered. The quadratic cost index minimised involves dynamically weighted error and nonlinear control signal costing terms. The aim here is to show the controller obtained is simple to design and implement. The features of the control law are explored. The controller obtained includes an internal model of the process and in one form is a nonlinear version of the Smith Predictor.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.673-676
• /
• 2003

This paper deals with the problem of moving object detection and location in computer vision. We describe a new object-dependent motion analysis method for tracking target in an image sequence taken from a moving platform. We tackle these tasks with three steps. First, we make an active contour model of a target in order to build some of low-energy points, which are called kernels. Then we detect interest points in two windows called tracking windows around a kernel respectively. At the third step, we decide the correspondence of those detected interest points between tracking windows by the probabilistic relaxation method In this algorithm, the detecting process is iterative and begins with the detection of all potential correspondence pair in consecutive image. Each pair of corresponding points is then iteratively recomputed to get a globally optimum set of pairwise correspondences.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1123-1126
• /
• 2005

This paper introduces the key features of NCS (Network based Control System), which is quite a new concept in the industrial automation market. Two control systems "DCS" and "PLC" have been recognized as control systems used for process and factory automation during the past decades. However, the market requires more complex functionality, such as monitoring and operation, alarm handling and notification from remote locations using the Web or e-mail. Besides enhancing functionality, interoperability between each device and system is highly required since network and engineering tools provided by many vendors do not cooperate with each others, so that lots of conversion, reconfiguration and reprogramming are required when expanding systems. NCS can meet this requirement, installing leading-edged IT technology using international standards for network and engineering environment. NCS, which is a harmony of web functionality, networkability and a reliable control function, enables information integration and responding to the market's requirements with agility and high reliability.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1836-1839
• /
• 2005

We have developed Ethernet based real-time communication systems called "Vnet/IP" for DCS which is the control system for process automation. This paper describes the features and the technologies of the ASIC which is utilized in the communication interface hardware for Vnet/IP. Vnet/IP has been developed for mission-critical communications. Hence it has real-time feature, high reliability and precise time synchronization capability. At the same time, it is able to deal with standard protocols without influence on mission-critical communications. The communication interface hardware has a host interface and dual redundant network interfaces. The host interface can be chosen PCI-bus or R-bus which is the proprietary internal bus developed for the high reliable redundant controller. Each network interface is a RJ45 connection with 1Gbps maximum in compliance with IEEE802.3.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.968-973
• /
• 1991

Seven axis modular type pneumatic manipulator is composed of electro-pneumatic automation system which contributes to factory automation by performing loading & unloading process successively which is simple routine work of dealing item of machine tool, catapult, assembly machine, welding machine and so on. In this study, we obtained soft and quick movement in a large space and good reliability motion of various function by combining several actuators which perform rotation movement as well as linear movement at the same time. Gripper which apply to rotary sensor transmitted a structure to demanded position. This development item of 5kgf load prevent stick-slip phenomena of stroke end by designing high cushion internal. We develope flexible manipulator which conforms to demand of user by applying multiple sequence program.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.116-116
• /
• 2000

This paper describes an experimental embedded tiny web server system that monitors the processing of manufacture using the Internet. The object of this study is developing of an embedded tiny web server that connects the stand-alone machines in factory to the Internet. Using the World Wide Web (WWW), we proffer user-friendly environments to users. Anyone with a web browser may easily access the processing of manufacture in the factory. Through connecting different network system, our web server extends the private networks to the Internet, the global networks. Our embedded tiny web server is ideal for process control, building and facility management system, factory automation and even home automation.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.49-57
• /
• 2011

In many industries, the accurate and quick checking of goods in storage is of great importance. Most today's inventory checking is based on bar code scanning, but the relative position between a bar code and an optical scanner should be maintained in close distance and proper angle for the successful scanning. This requirement makes it difficult to fully automate the inventory information/control systems. The use of RFID technology can be a solution for overcoming this problem. The mobile robot presented in this paper is equipped with an RFID tag scanning system, that automates the otherwise manual or semi-automatic inventory checking process. We designed the robot system in a quite practical approach, and the developed system is close to the commercialization stage. In our experiments, the robot could collect information of goods stacked on shelves autonomously without any failure and maintain corresponding database while it navigated predefined paths between the shelves using vision.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.943-954
• /
• 2000

Fieldbus is the lowest level industrial network in the communication hierarchy of factory automation and distributed process control systems. Data generated from field devices are largely divided into three categories : time-critical, periodic and time-available data. Because these data share one fieldbus medium, it needs a method that allocates these data to the bandwidth-limited fieldbus medium. This paper introduces an implementation method of bandwidth allocation scheme on PROFIBUS. In order to implement bandwidth allocation scheme on PROFIBUS, the following functions need to be supplemented on the FDL(Fieldbus Datalink Layer) protocol: (i) separation of medium bandwidth into periodic and non-periodic intervals, (ii) synchronization of node timers over a local link. In order to examine the validity of bandwidth allocation scheme on PROFIBUS, this paper develops an experimental model of a network system. The results obtained from the experimental model show that the bandwidth allocation scheme satisfies the performance requirement of time-critical, periodic and time-available data.