• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.71-78
• /
• 2007

There have been continuous efforts to automate welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, and using this, the 3 dimensional geometry of the bead is measured in real time. For the application in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.14-19
• /
• 1998

In this paper, a target approachable force-guided control with adaptive accommodation for the complex assembly is presented. The complex assembly (CA) is defined as a task which deals with complex shaped parts including concavity or whose environment is so complex that unexpected contacts occur frequently during insertion. CA tasks are encountered frequently in the field of the manufacturing automation and various robot applications. To make CA successful, both the bounded wrench condition and the target approachability condition should be satisfied simultaneously during insertion. By applying the convex optimization technique, an optimum target approaching twist can be determined at each instantaneous contact state as a global minimum solution. Incorporated with an admissible perturbation method, a new CA algorithm using only the sensed resultant wrench and the target twist is developed without motion planning nor contact analysis which requires the geometry of the part and the environment. Finally, a VME-bus based real-time control system is built to experiment various CA task. T-insertion task as a planar CA and double-peg assembly task as a spacial assembly were successfully executed by implementing the new force-guided control with adaptive accommodation.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권1호
• /
• pp.66-70
• /
• 2001

This paper describes the design of a two-axis force sensor for robots finger. In detects the x-direction force Fx and y-direction force Fy simultaneously. In order to safely grasp an unknown object using the robots fingers, they should detect the force or gripping direction and the force of gravity direction, and perform the force control using the forces detected. Therefore, the robots hand should be made by the robots finger with tow-axis force sensor that can detect the x-direction force and y-direction force si-multaneously. Thus, in this paper, the two-axis force sensor for robots finger is designed using several parallel-plate beams. The equations to calculate the strain of the beams according to the force in order to design the sensing element of the force sensor are derived and these equations are used to design the aize of two-axis force sensor sensing element. The reliability of the derive equa-tions is verified buy performing a finite element analysis of the sensing element. The strain obtained through this process is compared to that obtained through the theory analysis and a characteristics test of the fabricated sensor. It reveals that the rated strains calculated from the derive equations make a good agreement with the results from the Finite Element Method analysis and from the character-istic test.

• 한국게임학회 논문지
• /
• 제20권3호
• /
• pp.85-94
• /
• 2020

작업자-로봇 간 협업은 다품종 소량생산 기반의 스마트팩토리에서 중요한 요소가 된다. 기존 제조 공장을 스마트화하기 위해 AI 기반의 기술이 도입되고 있지만 이 경우 단기적 생산성 향상에 그친다. 이를 해결하기 위한 협업 지성은 인간의 팀워크, 창의력 등과 AI의 속도, 정확성 등이 결합되어 서로의 단점을 적극적으로 보완 할 수 있다. 그러나 현재 자동화설비는 돌발사태 발생 시 재해강도가 높기 때문에 안전대책이 요구된다. 따라서 본 논문에서는 깊이 영상 카메라를 이용하여 작업자 및 설비를 가상 세계에 구현하고, 시뮬레이션을 통해 작업자의 안전을 판별하는 공장 안전 제어 시스템을 설계하고 구현한다.

• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.60-68
• /
• 1999

본 논문은 미지이거나 변화하는 산업용 로봇 매니퓰레이터의 추종문제를 다룬다. 제시된 방법은 간접적응 제어기 구조를 근거로 퍼지추론에 의한 스위칭 구조를 통해 다중모델 적응제어기를 설계하고자 한다. 매니퓰레이터 한 개의 식별기를 이용한 다중 식별기들은 미지 관성 파라미터와 부하무게의 초기 추정치를 제외하고는 동일하다. 관절 액츄에이터에 가해진 토크입력은 매순간 로봇 동적시스템의 가장 근접한 식별기 모델에 의해 결정된다. 제시된 방법을 이용하여 용접라인 및 부품조립 자동화 설비 등의 적용 예로서 산업용 로봇 매니퓰레이터의 추종성능이 개선됨을 컴퓨터 모의 실험을 통해 보인다.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.3714-3721
• /
• 2015

서셉터 히터에서 쉬스 열선을 사용하는 방법이 일반화되어 있지만, 대면적 초고온 조건에서는 서셉터의 온도 균일도 성능 저하의 문제가 있다. 본 연구에서는 온도균일도 성능을 향상시킬 수 있도록 판형 형태의 열선을 기본으로 새로운 서셉터를 설계하여 프로토타입을 개발하였다. 표면 온도 $450^{\circ}C$의 고온에서 1.4% 이내로 온도 균일도가 시제작된 서셉터에서 검증될 수 있었다. 또한 온도 학습 데이터를 이용하여 측정 온도 데이터를 예측할 수 있는 커널 회귀 알고리즘을 개발하고, 이러한 예측 데이터와 측정 데이터의 비교 분석으로 균일도 측정 온도의 신뢰성을 확인할 수 있었다.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.101-110
• /
• 2018

This paper introduces feedback linearization (FL) based adaptive sliding mode control (ASMC) effective against ground effects of the quadrotor UAV. The proposed control has the capability of estimation and effective rejection of those effects by adaptive mechanism, which resulting stable attitude and positioning of the quadrotor. As output variables of quadrotor, x-y-z position and yaw angle are chosen. Dynamic extension of the quadrotor dynamics is obtained for terms of roll and pitch control input to be appeared explicitly in x-y-z dynamics, and then linear feedback control including a ground effect is designed. A sliding mode control (SMC) is designed with a class of FL including higher derivative terms, sliding surfaces for which is designed as a class of integral type of resulting closed loop dynamics. The asymptotic stability of the overall system was assured, based on Lyapunov stability methods. It was evaluated through some simulation that attitude control capability is stable under excessive estimation error for unknown ground effect and initial attitude of roll, pitch, and yaw angle of $30^{\circ}$ in all. Effectiveness of the proposed method was shown for quadrotor system with ground effects.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.315-321
• /
• 2021

In this study, the natural frequency analysis of the fuel pipe and vibration test jig was performed as a basic study to determine the vibration characteristics of the vehicle's fuel pipe and the stability analysis of fatigue failure of the pipe. The natural frequencies of the fuel pipe and the fuel pipe with the test jig were calculated and the results were compared. As a result of the analysis, it was found that the natural frequency of the fuel pipe and the natural frequency of the test jig differed about 7 times, so that the vibration of the test jig did not affect the vibration of the fuel pipe. In addition, as a result of the natural frequency analysis of the fuel pipe itself and the pipe with the test jig attached, the maximum error is less than about 1%. In the future, it was suggested that the analysis of the design changed fuel pipe may be performed without a test jig.

• 로봇학회논문지
• /
• 제17권4호
• /
• pp.417-424
• /
• 2022

In this paper, the developed trunk cargo unloading automation system is introduced, and the RGB-D sensor-based box loading situation recognition method and unloading plan applied to this system are suggested. First of all, it is necessary to recognize the position of the box in a truck. To do this, we first apply CNN-based YOLO, which can recognize objects in RGB images in real-time. Then, the normal vector of the center of the box is obtained using the depth image to reduce misrecognition in parts other than the box, and the inner wall of the truck in an image is removed. And a method of classifying the layers of the boxes according to the distance using the recognized depth information of the boxes is suggested. Given the coordinates of the boxes on the nearest layer, a method of generating the optimal path to take out the boxes the fastest using this information is introduced. In addition, kinematic analysis is performed to move the conveyor to the position of the box to be taken out of the truck, and kinematic analysis is also performed to control the robot arm that takes out the boxes. Finally, the effectiveness of the developed system and algorithm through a test bed is proved.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.156-166
• /
• 1995

This paper presents a bin picking method using a slit beam laser in which a robot recognizes all of the unoccluded objects from the top of jumbled objects, and picks them up one by one. Once those unoccluded objects are removed, newly developed unoccluded objects underneath are recognized and the same process is continued until the bin gets empty. To recognize unoccluded objects, a new algotithm to link edges on slices which are generated by the orthogonally mounted laser on the xy table is proposed. The edges on slices are partitioned and classified using convex and concave function with a distance parameter. The edge types on the neighborhood slices are compared, then the hamming distances among identical kinds of edges are extracted as the features of fuzzy membership function. The sugeno fuzzy integration about features is used to determine linked edges. Finally, the pick-up sequence based on MaxMin theory is determined to cause minimal disturbance to the pile. This proposed method may provide a solution to the automation of part handling in manufacturing environments such as in punch press operation or part assembly.