• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.952-958
• /
• 2009

This article presents a combined structure of serial and parallel mechanisms for a humanoid robot. The 3 DOF parallel structure is designed and added to the waist of the humanoid robot arm to give flexible bending and rotating motions. Forward and inverse kinematics of a serial and parallel robot have been analyzed to generate motions. Simulation studies of verifying kinematics solutions of the parallel robot have been done. Experimental studies of mimicking shake-hands motion have been conducted to show the feasibility and usability of the combined structure.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.132-138
• /
• 2009

In this paper, control of an omni-directional mobile robot is presented. Relying on encoder measurements to define the azimuth angle yields the dead-reckoned situation which the robot fails in localization. The azimuth angle error due to dead-reckoning is compensated and corrected by the magnetic compass sensor. Noise from the magnetic compass sensor has been filtered out. Kinematics and dynamics of the omni-directional mobile robot are derived based on the global coordinates and used for simulation studies. Experimental studies are also conducted to show the correction by the magnetic compass sensor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.399-402
• /
• 2005

In this paper, we propose fuzzy logic system that compensates position of robot in robot slip. The fuzzy logic system can infer robot slip in its capability. In order to verify the effectiveness of the proposed method, we performed the simulation for position compensation of robot slip. The results showed a good performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.6 s.171
• /
• pp.98-108
• /
• 2005

Conventional robot manipulators actuated by motors with the speed reducer such as the harmonic drive have weakness in the load capacity, since the speed reducer does not have enough strength. To improve this, a new type of robot actuator based on the four-bar-link mechanism driven by the ball screw was constructed. Also, a new type of revolute robot manipulator composed of the developed actuators was developed. But, modelling errors occur due to the off-set from the nominal model since the exact modeling of the complex inertia variation of the four-bar-link actuator is very difficult. To control the proposed robot along the prescribed trajectory, a sliding mode control algorithm was applied with compensation function for the modeling errors. To show performance of the proposed controller, a computer simulation was performed, and its results was presented.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.95-103
• /
• 2011

Robots in various types carry and assemble parts through repeatedly and accurately moving to stored locations by combining linear motions. And, linear systems are used in orthogonal axes of robots and driven via ball screws, such as 2-axis cartesian coordinate robot in this paper. This paper presents the effect of the linear motion guide that is used in $2^{nd}$ axis in 2-axis cartesian coordinate robot. Some simulation results show that the linear motion guide influence greatly in robot performance such as the nominal life of linear guide. When use LM guide that have capacity near in $2^{nd}$ axis, this paper show that the nominal life on LM block of $1^{st}$ axis increases 37.4% and that the specification of $2^{nd}$ axis LM guide influences greatly the nominal life of $1^{st}$ axis LM block.

• Advances in robotics research
• /
• v.2 no.3
• /
• pp.247-257
• /
• 2018

Various studies have been performed to coordinate robots in transporting objects and different artificial intelligence algorithms have been considered in this field. In this paper, we investigate and solve Multi-Robot Transportation problem by using a combined auction algorithm. In this algorithm each robot, as an agent, can perform the auction and allocate tasks. This agent tries to clear the auction by studying different states to increase payoff function. The algorithm presented in this paper has been applied to a multi-robot system where robots are responsible for transporting objects. Using this algorithm, robots are able to improve their actions and decisions. To show the excellence of the proposed algorithm, its performance is compared with three heuristic algorithms by statistical simulation approach.

• The Journal of Korea Robotics Society
• /
• v.16 no.1
• /
• pp.72-78
• /
• 2021

This paper presents a robust impedance control of high-DOF robot based on disturbance observer(DOB). A novel DOB is derived by considering the residual disturbance caused by the difference between actual disturbance and disturbance decoupling input which utilizes the estimated disturbance. It focuses on the elimination of the residual disturbance and improvement of the control performance as well as the good estimation of disturbances. In the control of high-DOF robot, numerical dynamic model, which is conducted by a software based on dynamics, is utilized because the analytical model of high-DOF robot is difficult to be obtained. The simulation of high-DOF robot with numerical dynamic model is provided to verify the performance of the proposed controller.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.351-361
• /
• 2021

This study proposes an intelligent control of manufacturing robot with dual arm based on neural network for smart factory implementation. In the control method of robot system, the perspectron structure of single layer based on neural network is useful for simple computation. However, the limitations of computation are emerging in areas that require complex computations. To overcome limitation of complex parameters computation a new intelligent control technology is proposed in this study. The performance is illustrated by simulation and experiments for manufacturing robot dual arm robot with eight axes.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.2
• /
• pp.223-229
• /
• 1987

This robot programming system is designed for off-line programming of numerical controlled robot manipulator. This system consists of manipulation interpreter, world model manager, graphic simulator and arm controller for simple robot programming language. The system has graphic simulation system as a debugging tool for task programming and it simulates the robot motion graphically on a CRT terminal, which makes the assessment of the possible robot motion.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1126-1130
• /
• 2010

Research on intelligent robot is in active progress as the next generation IT education area. Since intelligent robots are closely related to the real human world, they should provide human behaviors or judging ability as their functions. For this reason, research is recently done not only on diverse hardware of robot education but also on service component architecture which includes various functions. In this paper we propose a study on learning to creative solve problems using RDS(Robotics Developer Studio). RDS is a software tool to control or program intelligence robot as a software module. Using service component framework which considers standardization of the integrated development of intelligent robot, we expect to provide 3-dimensional visual simulation environment, and save time and costs in education the environment for the intelligence robot experiment.