• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.157-166
• /
• 2024

The Army TIGER System, which is being deployed to implement a future combat system, is expected to bring innovative changes to the army's combat methods and comabt execution capability such as mobility, networking and intelligence. To this end, the Army will introduce various systems using drones, robots, unmanned vehicles, AI(Artificial Intelligence), etc. and utilize them in combat. The use of various unmanned vehicles and AI is expected to result in the introduction of equipment with new technologies into the army and an increase in various types of transmitted information, i.e. data. However, currently in the military, there is an acceleration in research and combat experimentations on warfigthing options using Army TIGER forces system for specific functions. On the other hand, the current reality is that research on cyber threats measures targeting information systems related to the increasing number of unmanned systems, data production, and transmission from unmanned systems, as well as the establishment of cloud centers and AI command and control center driven by the new force systems, is not being pursued. Accordingly this paper analyzes the structure and characteristics of the Army TIGER force integration system and makes suggestions for necessity of building, available cyber defense solutions and Army TIGER integrated cyber protections system that can respond to cyber threats in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.89-96
• /
• 2009

As increasing the number of digital control devices installed on aircrafts and their transmission speed, various digital data buses have been introduced to provide reliable and high-speed characteristics. These characteristics of avionics data bus are highly related on the fault-tolerant performance which can make minimize jitter and loss during data transfer. In this paper, we concerned about a new traffic shaping scheme for increasing the reliability of Avionics Full Duplex Switched Ethernet (AFDX) systems based on ARINC 664 standard. We note that the conventional AFDX with a single regulator per virtual link system may produce aggregated traffics as the number of virtual links increasing. The aggregated traffic results in large jitters among frames. To remedy for the jitter and loss of data, we propose a dual regulator scheme for the AFDX system. The purpose of the additional regulator is to additionally regulate aggregated traffics from a number of per virtual link regulators. Using NS-2 simulator, we show that the proposed scheme provides a better performance than the single regulator one. It is worthwhile note that the proposed AFDX with Dual Regulator scheme can be employed to not only aircraft networks but other QoS sensitive networks for robot and industrial control systems.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.4
• /
• pp.65-73
• /
• 1997

This paper proposes a new method of the structure pruning of dynamic recurrent neural networks (DRNN) using evolutionary computations. In general, evolutionary computations are population-based search methods, therefore it is very useful when several different properties of neural networks need to be optimized. In order to prune the structure of the DRNN in this paper, we used the evolutionary programming that searches the structure and weight of the DRNN and evolution strategies which train the weight of neuron and pruned the net structure. An addition or elimination of the hidden-layer's node of the DRNN is decided by mutation probability. Its strategy is as follows, the node which has mhnimum sum of input weights is eliminated and a node is added by predesignated probability function. In this case, the weight is connected to the other nodes according to the probability in all cases which can in- 11:ract to the other nodes. The proposed pruning scheme is exemplified on the stabilization and position control of the inverted-pendulum system and visual servoing of a robot manipulator and the effc: ctiveness of the proposed method is demonstrated by numerical simulations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.331-336
• /
• 2011

The three-dimensional complex curvature of the airfoil complicates the manufacture and repair of gas-turbine components. As a result of the developments in computer technology since the early 1990s, CNC-based technologies for machine tools and related programs have been increasingly applied in the gas turbine industry. In particular, fiveaxis simultaneous machines with adaptive functions have proven its excellent flexibility and productivity due to the capability in determining the 3D data from the unknown curvature. A well-organized robot system with eight-axis simultaneous control can lead to powerful standardization and high productivity. We summarize and review CNC technologies and their applications in the gas turbine industry, with a discussion of the manufacture and repair of gas turbine parts.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1864-1865
• /
• 2006

무인지능형로봇 시스템에 있어서 자세의 정확도를 향상시키기 위한 많은 연구가 이루어져 왔다. 시스템의 자세 제어는 사용되는 모터의 위치 제어로 대응된다. 이와 같은 시스템은 운용 시에 충격 진동이 발생하게 된다. 이러한 충격 진동 외란을 잘 제거해야 요구되는 위치 정도로 제어를 수행할 수 있다. 로봇 제어 분야에서 불확실한 로봇에 대한 자세 제어 분야는 가장 기본적이면서 중요한 분야중의 하나이다. 이러한 문제를 다루기 위하여 계산 토크 방식에 기초한 선형 제어 기법이나 적응 제어 기법, 강인 제어 기법 등을 이용한 연구 결과들이 발표되고 있다. 그러나 그러한 기법은 일반적으로 로봇의 정확한 동력학식을 알아야 하며, 구현하기 복잡하다. 따라서 본 논문에서는 적응 규칙에 의하여 모델의 불확실성, 시스템의 변화, 외란으로 인해 발생하는 공칭 플랜트와의 오차를 보상하도록 제어 입력을 생성하는 내부 루프 부분과 공칭 플랜트 모델의 명령을 추종하도록 하는 제어 입력을 생성하는 외부 루프 부분으로 구성되는 방법인 외란관측기(Disturbance OBserver : DOB) 제어 알고리즘을 제안한다. 또한 프로세서의 신뢰성과 수치 연산 및 알고리즘의 빠른 처리를 위해 현재 사용 빈도가 높은 TI사의 DSP시리즈 중에서 부동 소수점 연산 기능을 가지면서 모터 제어에 적합한 TMS320C2000계열의 TMS320F2812을 사용하여, 운용 시 발생되는 진동 둥에 대한 외란 제거를 목적으로 한다. 본 논문은 규명된 시스템 모델식을 바탕으로 DOB 제어 시뮬레이션을 수행하고 PMSM 모터모델 시뮬링크 블록을 구성하여 검증된 외란 관측기 제어 알고리즘을 검증한다. 시뮬레이션으로 검증된 DOB 모터 자세 제어 알고리즘을 DSP에 적용하기 위해 코드변환하고 모터 실험 시스템에 실제 적용함으로써 타당성을 검증하여 상용 제어기로 실제 현장에 적용 가능함을 입증한다.

• Journal of Biosystems Engineering
• /
• v.36 no.5
• /
• pp.377-383
• /
• 2011

This study proposed the new method of discerning the assembled parts and presuming the position of central point in a Cowl Cross Bar (CCB) using a Charge-Couple Device (CCD) camera attached to a robot in the auto assembly line. Three control points of an ellipse were decided by three reference points, which were equally distanced. The radii of these reference points were determined by the size of the object, and the repeated presumption secured the precise determination. The comparison of the central point of ellipse presumed by Randomized Hough Transform (RHT) with the part information stored in a database was used for determining the faulty part in an assembly. The method proposed in this study was applied for the real-time inspection of elliptical parts, such as bolt, nut hole and so on, connected to a CCB using a CCD camera. The findings of this study showed that the precise decision on whether the parts are inferior or not can be made irrespective of the lighting condition of industrial site and the noises of the surface of the part. In addition, the defect decision on the individual elliptic parts assembled in a CCB showed more than 98% accuracy within a 500-millisecond period at most.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.165-172
• /
• 1998

The electromechanical energy conversion conditioning and processing implementation in USM direct motion control system is generally divided into two power stages: the two-phase high-frequency ac power inversion stage for driving piezoelectric ceramic PZT transducer array off the USM stator and the mechanical thrust power conversion stage based on the frictional force between the piezo electric stator array and the rotary slider of the USM. However, the dynamic and steady-state mathematical modeling of the USM is extremely default from a theoretical point of view because it contains many complicated an nonlinear characteristics dependant on operation temperature. In +2$0^{\circ}C$~3$0^{\circ}C$, the operating characteristics of the USM has represented normal condition. But the other temperature, it has abnormal condition so that driving frequency, current and motor speed will be down. The recent USM has controller without temperature compensation. This study represents the fuzzy controller for speed compensation according to operating temperature by driving frequency.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2007

As fiber reinforced composite materials are widely used in aircraft, space structures and robot arms, the study on non-destructive testing methods has become an important research area for improving their reliability and safety. AE (acoustic emission) can evaluate the defects by detecting the emitting strain energy when elastic waves are generated by the initiation and growth of crack, plastic deformation, fiber breakage, matrix cleavage, or delamination. In the paper, AE signals generated under uniaxial tension were measured and analyzed using the $8{\times}8$ matrix piezo electric sensor. The electronic circuit to control the transmitting distance of AE signals was designed and constructed. The optical data storage system was also designed to store the AE signal of 64channels using LED (light emitting diode) elements. From the tests, it was shown that the source location and propagation path of AE signals in composite materials could be detected effectively by the $8{\times}8$ matrix piezo electric sensor.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.610-613
• /
• 2010

본 과제를 통하여 기술적으로는 로봇 개발에 있어 기존 기술을 최대한 활용하고 새로운 기능을 추가하는 형태로 발전해 갈 수 있도록, 각 요소별 기능을 표준화 모듈화 하여 새로운 제품의 개발이 손쉽게 이루어 질 수 있는 기본 platform으로의 역할이 가능해졌다. 구동부 제작 및 설계, 금형 비용 등을 절감하기 위한 다목적 완구로봇 플랫폼을 확보할 수 있었다. 로봇이 복잡한 환경을 인식하고, 자율적으로 작업을 수행하며, 예측하지 못한 문제에 적절한 대처를 할 수 있도록 하기 위한 핵심 기술을 제공하게 될 것으로 생각된다. 로봇 개발에 있어 전문지식이 없는 초보자들이 직접 제작 구동해 볼 수 있는 비주얼한 개발환경을 지원할 뿐만 아니라 GUI 개발환경 및 TEXT Programming 으로 상호 전환이 가능한 코딩 방법을 지원(MSRS와의 차별화를 시도하였다. 기존 하드웨어 지식과 소프트웨어지식이 없는 상태에서도 제작자의 창의력에 따라 다양한 형태의 로봇을 제작 적용이 용의 하며 초보자들에 대한 로봇개발에 흥미를 유발할 수 있도록 하였다. 고급사용자를 위한 별도의 다운로딩 포트를 제공하였다. 로봇공학의 기본지식을 습득(아날로그/디지털 회로를 이해하고, 각종 센서의 이해하며, 스템/서보/DC모터의 제어기술, 펌웨어개발능력, 기본수준의 소프트웨어개발 능력) 활용할 수 있다. 또한, 경제 및 산업적 측면으로는 다음과 같은 장점이 있다. 기존 기술들의 장점을 취합하여 추가적인 기술을 적용할 수 있는 Base형태의 로봇을 개발할 경우 이를 활용한 제품 개발 및 Base자체로도 충분한 시장을 형성 할 수 있을 것으로 기대된다. 인터넷기반 로봇 제어 기술의 확보로 로봇시스템의 생산비용을 낮추고 TTM (Time-to-Market) 제약을 해결시켜 준다. 다른 응용 시스템에 쉽게 적용이 가능하고 지식기반 로봇 서비스의 요소기술 개발은 멀티미디어 콘텐츠분야(교육/게임/오락 등)의 활성화가 가능하기 때문에 타 IT산업에의 파급효과가 예상된다. B2B를 통한 실질적인 판매를 통한 동종기업의 연구 개발비 및 개발 기간의 단축이 예상된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.731-733
• /
• 2016

The primary goal of the line tracer is to accurately and quickly detect the movement up to the target position given by the sensor juhaengseon. It has been used in applications in various fields such as the current unmanned transport vehicles, laser cutting machine, autonomous mobile robots and unmanned driving is possible, and is held annually at various universities in the competition field with the possibility of great progress, depending on the application. However, there arises a large difference in running performance, depending on the hardware design and control. In this paper, improving the characteristics of the tracer line and characters to design a PID controller is to apply the point on ways of improving the properties of the system.