• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.29-37
• /
• 1999

In general, the information processing capability of a neural network is determined by its architecture and efficient training patterns. However, there is no systematic method for designing neural network and selecting effective training patterns. Evolutionary Algorithms(EAs) are referred to as the methods of population-based optimization. Therefore, EAs are considered as very efficient methods of optimal system design because they can provide much opportunity for obtaining the global optimal solution. In this paper, we propose a new method for finding the optimal structure of neural networks based on competitive co-evolution, which has two different populations. Each population is called the primary population and the secondary population respectively. The former is composed of the architecture of neural network and the latter is composed of training patterns. These two populations co-evolve competitively each other, that is, the training patterns will evolve to become more difficult for learning of neural networks and the architecture of neural networks will evolve to learn this patterns. This method prevents the system from the limitation of the performance by random design of neural networks and inadequate selection of training patterns. In co-evolutionary method, it is difficult to monitor the progress of co-evolution because the fitness of individuals varies dynamically. So, we also introduce the measurement method. The validity and effectiveness of the proposed method are inspected by applying it to the visual servoing of robot manipulators.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1481-1486
• /
• 2013

The small wind generator with existing mechanical control system has a frequent failure and malfunction, and its maintenance is difficult. In this paper, an electric control method using a boost converter for small wind generator was suggested. The suggested 2-level boost converter control device was manufactured and its experimental operation were conducted on a wind generator with 200 [W] capacity. As a result of experimental device, the control by a boost converter was executed at the point that the output voltage of a wind generator became 36 [V] so it could be identified that the output voltage of a wind generator diminished and then it became 0 [V] after 5 [sec]. Besides, in case of applying the method suggested in this paper to a small wind power generation facility for street lights, it is expected to reduce its maintenance by preventing a frequent failure of a generator and to improve its utilization rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2645-2652
• /
• 2013

For a variety of vision systems such as car omni-directional surveillance systems and robot vision systems, many cameras have been equipped and used. In order to detect corners of grid pattern in AVM(Around View Monitoring) systems, after the non-linear radial distortion image obtained from wide-angle camera is corrected, corners of grids of the distortion corrected image must be detected. Though there are transformations such as Sub-Pixel and Hough transformation as corner detection methods for AVM systems, it is difficult to achieve automatic detection by Sub-Pixel and accuracy by Hough transformation. Therefore, we showed that the automatic detection proposed in this paper, which detects corners accurately from the distortion corrected image could be applied for AVM systems, by designing and implementing it, and evaluating its performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.395-403
• /
• 2012

This is direct bonding many of the metal bumps between FPCB and HPCB substrate. By using an ultrasonic horn mounted on an ultrasonic bonding machine, it is possible to bond gold pads onto the FPCB and HPCB at room temperature without an adhesive like ACA or NCA and high heat and solder. This ultrasonic bonding technology minimizes damage to the material. The process conditions evaluated for obtaining a greater bonding strength than 0.6 kgf, which is commercially required, were 40 kHz of frequency; 0.6MPa of bonding pressure; and 0.5, 1.0, 1.5, and 2.0 s of bonding time. The peel off test was performed for evaluating bonding strength, which was found to be more than 0.80 kgf.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.610-613
• /
• 2010

본 과제를 통하여 기술적으로는 로봇 개발에 있어 기존 기술을 최대한 활용하고 새로운 기능을 추가하는 형태로 발전해 갈 수 있도록, 각 요소별 기능을 표준화 모듈화 하여 새로운 제품의 개발이 손쉽게 이루어 질 수 있는 기본 platform으로의 역할이 가능해졌다. 구동부 제작 및 설계, 금형 비용 등을 절감하기 위한 다목적 완구로봇 플랫폼을 확보할 수 있었다. 로봇이 복잡한 환경을 인식하고, 자율적으로 작업을 수행하며, 예측하지 못한 문제에 적절한 대처를 할 수 있도록 하기 위한 핵심 기술을 제공하게 될 것으로 생각된다. 로봇 개발에 있어 전문지식이 없는 초보자들이 직접 제작 구동해 볼 수 있는 비주얼한 개발환경을 지원할 뿐만 아니라 GUI 개발환경 및 TEXT Programming 으로 상호 전환이 가능한 코딩 방법을 지원(MSRS와의 차별화를 시도하였다. 기존 하드웨어 지식과 소프트웨어지식이 없는 상태에서도 제작자의 창의력에 따라 다양한 형태의 로봇을 제작 적용이 용의 하며 초보자들에 대한 로봇개발에 흥미를 유발할 수 있도록 하였다. 고급사용자를 위한 별도의 다운로딩 포트를 제공하였다. 로봇공학의 기본지식을 습득(아날로그/디지털 회로를 이해하고, 각종 센서의 이해하며, 스템/서보/DC모터의 제어기술, 펌웨어개발능력, 기본수준의 소프트웨어개발 능력) 활용할 수 있다. 또한, 경제 및 산업적 측면으로는 다음과 같은 장점이 있다. 기존 기술들의 장점을 취합하여 추가적인 기술을 적용할 수 있는 Base형태의 로봇을 개발할 경우 이를 활용한 제품 개발 및 Base자체로도 충분한 시장을 형성 할 수 있을 것으로 기대된다. 인터넷기반 로봇 제어 기술의 확보로 로봇시스템의 생산비용을 낮추고 TTM (Time-to-Market) 제약을 해결시켜 준다. 다른 응용 시스템에 쉽게 적용이 가능하고 지식기반 로봇 서비스의 요소기술 개발은 멀티미디어 콘텐츠분야(교육/게임/오락 등)의 활성화가 가능하기 때문에 타 IT산업에의 파급효과가 예상된다. B2B를 통한 실질적인 판매를 통한 동종기업의 연구 개발비 및 개발 기간의 단축이 예상된다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.34-38
• /
• 2007

There has been skeptical aspects for the robot to be effective in combat fields even though consensus of operational needs and some technological advancements. One of fundamental problems is difficulties in the autonomous technology applicable. This technology is not sufficient to be applied for heavy combat operation, therefore, developer first make open architecture, then, application is implemented on the condition that new functions or technologies will be developed later. It is also required to partition all the functions with common segments which are general to all platforms in order to operate together in the fields and to reduce the load of development to each platform respectively. In addition, common middleware based on the reference architecture is also developed to accommodate new technology evolution. This paper introduces the architecture and middleware applied in XAV(eXperimental Autonomous Vehicle) developed in ADD. In addition, the performance of autonomous navigation and system design characteristics are introduced briefly.

• The Magazine of the IEIE
• /
• v.22 no.8
• /
• pp.33-43
• /
• 1995

생산시스템 분야에서의 다중로봇시스템에 대한 필요성이 증가되고 있기 때문에, 이에 대한 시스템 성능분석이 우선적으로 필요하다. 본 논문에서는 다중로봇시스템의 성능평가를 위한 컴퓨터 시뮬레이션 방법을 제시한다. 먼저 오류회복 기능만을 고려한 다중로봇시스템에 대하여 여러 가지의 모델링 방법 중에서 확장 페트리 네트 모델을 기초로 하여 컴퓨터 시뮬레이션 하는 과정을 제시하고 제시된 시뮬레이션 방법의 유효성을 입증하기 위하여 부가적으로 큐잉모델을 기초로 한 해석적 수식을 유도하여 두 가지의 결과를 비교해 본다. 그 다음, 오류회복 기능에 덧붙여서 충돌회피 기능을 고려한 다중로봇시스템은 해석적 수식을 유도하기 위해서는 강력한 가정들이 필요하며 이러한 가정들 때문에 실제 시스템을 정확히 모델에 반영하기 어려워진다. 따라서, 그 유효성이 입증된 컴퓨터 시뮬레이션을 이용하면 필요한 최적의 운용 변수를 용이하게 선택할 수 있을 것이다. Since there are Increasing demands for multirobot interconnection systems(MRIS) in Industrial manufacturing system, the performance evaluation of the MRIS is first needed. This thesis presents a computer simulation technique for the performance evaluation of the MRIS. First, we consider a error recoverable MRIS. We adopt the extended Petri net model as a computer simulation model that allows an easy evaluation of the performance. To verify the significance of the proposed computer simulation method, mathematical analysis, which is based on the given queueing model, is carried out with some design issues for the MRIS. In addition to this, it is required to analyze the MRIS considering collision avoidance as well as error recovery. In this case, methematial analysis needs hard assumptions which are the constraints for the precise description of real environment. Thus, we present a computer simulation model and its results suggest an optimal operational strategy for the MRIS under given conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.8
• /
• pp.505-510
• /
• 2017

This paper presents a low-cost robotic device for shoulder rehabilitation, which is capable of treating various shoulder disabilities. A 3-DOF passive shoulder joint tracking module was designed to allow for translational motion of the shoulder joint center during arm swing, which is essential for natural shoulder movement. The weight of the user's arm and the device were compensated for by springs, to enable gravity-free shoulder motion. In order to reduce the device's cost, only one actuator was used, which can be aligned with the user's shoulder joint in various orientations. The device is capable of implementing five representative shoulder motions, including flexion/extension, abduction/adduction, horizontal abd/adduction, internal/external rotation, and oblique raise. The proposed low-cost shoulder rehabilitation robot is expected to provide effective rehabilitation for patients with various shoulder impairments.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.1-11
• /
• 2005

Several Solid Freeform Fabrication Systems(SFFS) are commercialized in a few companies for rapid prototyping. However, they have many technical problems including the limitation of applicable materials. A new method of agile prototyping is required for the recent manufacturing environments of multi-item and small quantity production. The objectives of this paper include the development of a novel method of SFFS, the CAFL/sup VM/(Computer Aided Fabrication of Lamination for Various Material), and the manufacture of the various material samples for the certification of the proposed system and the creation of new application areas. For these objectives, the technologies for a highly accurate robot path control, the optimization of support structure, CAD modeling, adaptive slicing was implemented. However, there is an important problem with the conventional 2D lamination method. That is the inaccuracy of 3D model surface, which is caused by the stair-type surface generated in virtue of vertical 2D cutting. In this paper, We design the new control algorithm that guarantees the constant speed, precise positioning and tangential cutting on the 5DOF SFFS. We develop the tangential cutting algorithm to be controlled with constant speed and successfully implemented in the 5DOF CAFL/sup VM/ system developed in this paper. Finally, this paper confirms its high-performance through the experimental results from the application into CAFL/sup VM/ system.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.45-55
• /
• 2013

Purpose - The development and implementation of OSS (Open Source Software) led to a dramatic change in corporate IT infrastructure, from system server to smart phone, because the performance, reliability, and security functions of OSS are comparable to those of commercial software. Today, OSS has become an indispensable tool to cope with the competitive business environment and the constantly-evolving IT environment. However, the use of OSS is insufficient in small and medium-sized companies and software houses. This study examines the need for OSS Intermediaries in the Software Distribution Channel. It is expected that the role of the OSS Intermediary will be reduced with the improvement of the distribution process. The purpose of this research is to prove that OSS Intermediaries increase the efficiency of the software distribution market. Research design, Data, and Methodology - This study presents the analysis of data gathered online to determine the extent of the impact of the intermediaries on the OSS market. Data was collected using an online survey, conducted by building a personal search robot (web crawler). The survey period lasted 9 days during which a total of 233,021 data points were gathered from sourceforge.net and Apple's App store, the two most popular software intermediaries in the world. The data collected was analyzed using Google's Motion Chart. Results - The study found that, beginning 2006, the production of OSS in the Sourceforge.net increased rapidly across the board, but in the second half of 2009, it dropped sharply. There are many events that can explain this causality; however, we found an appropriate event to explain the effect. It was seen that during the same period of time, the monthly production of OSS in the App store was increasing quickly. The App store showed a contrasting trend to software production. Our follow-up analysis suggests that appropriate intermediaries like App store can enlarge the OSS market. The increase was caused by the appearance of B2C software intermediaries like App store. The results imply that OSS intermediaries can accelerate OSS software distribution, while development of a better online market is critical for corporate users. Conclusion - In this study, we analyzed 233,021 data points on the online software marketplace at Sourceforge.net. It indicates that OSS Intermediaries are needed in the software distribution market for its vitality. It is also critical that OSS intermediaries should satisfy certain qualifications to play a key role as market makers. This study has several interesting implications. One implication of this research is that the OSS intermediary should make an effort to create a complementary relationship between OSS and Proprietary Software. The second implication is that the OSS intermediary must possess a business model that shares the benefits with all the participants (developer, intermediary, and users).The third implication is that the intermediary provides an OSS of high quality like proprietary software with a high level of complexity. Thus, it is worthwhile to examine this study, which proves that the open source software intermediaries are essential in the software distribution channel.