• Journal of Yeungnam Medical Science
• /
• v.41 no.1
• /
• pp.48-52
• /
• 2024

While simultaneous bilateral partial nephrectomy with a conventional multiport robot has been consistently reported since the 2010s, the introduction of the DaVinci SP system (Intuitive Surgical, Sunnyvale, CA, USA) could provide a novel way to perform surgery on bilateral kidneys while innovatively reducing the number of incisions. In our first report worldwide, the patient with bilateral small renal mass (2.0 cm for the left and 1.5 cm for the right side) and preoperative normal renal function was placed in the lateral decubitus position on an inverted bed. After tilting the bed to be as horizontal as possible, a 4-cm incision was made in the lower part of the umbilicus for the floating trocar technique. The partial nephrectomy was performed reliably as with the conventional transperitoneal approach, and then the patient could be repositioned to the contralateral side for the same procedure, maintaining all trocars. Total operation time (skin to skin), total console time, and the left- and right-side warm ischemic times were 260, 164, 27, and 23 minutes, respectively, without applying the early declamping technique. The estimated blood loss was 200 mL. The serum creatinine right after the operation, on the first day, 3 days, and 90 days after surgery were 0.92, 0.77, 0.79, and 0.81 mg/dL, respectively. For 90 days after the procedure, no complications or radiologic recurrence were observed. Further clinical studies will reveal the advantages of using the DaVinci SP device for this procedure over traditional multiport surgery, maximizing the benefit of a single port-based approach.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.47-54
• /
• 2010

Old archived film shows two major defects: line scratch and blobs. In this paper, we present a design and implementation of an automatic video restoration system for line scratches observed in archived film. We use autoregressive (AR) image model because we can make stochastic and specifically autoregressive image generation process with our PAST-PRESENT model and Sampling Pattern. We designed locality maximizing scanning pattern, which can generate nearly stationary time-like series of pixels, which is a strong requirement for a stochastic series to be autoregressive. The sampled pixel series undergoes filtering and model fitting using Durbin-Levinson algorithm before interpolation process. We designed three-stage film restoration system, which includes (1) film acquisition from VHS tapes, (2) simple line scratch detection and restoration, and (3) manual blob identification and sophisticated inpainting scheme. We implemented film acquisition and simple inpainting scheme on Texas Instruments DSP board TMS320DM642 EVM, and implemented our AR inpainting scheme on PC for sophisticated restoration. We experimented our scheme with two old Korean films: "Viva Freedom" and "Robot Tae-Kwon-V", and the experimental results show that our scheme improves Bertalmio's scheme for subjective quality (MOS), objective quality (PSNR), and especially restoration ratio (RR), which reflects how much similar to the manual inpainting results.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.45-55
• /
• 2013

Purpose - The development and implementation of OSS (Open Source Software) led to a dramatic change in corporate IT infrastructure, from system server to smart phone, because the performance, reliability, and security functions of OSS are comparable to those of commercial software. Today, OSS has become an indispensable tool to cope with the competitive business environment and the constantly-evolving IT environment. However, the use of OSS is insufficient in small and medium-sized companies and software houses. This study examines the need for OSS Intermediaries in the Software Distribution Channel. It is expected that the role of the OSS Intermediary will be reduced with the improvement of the distribution process. The purpose of this research is to prove that OSS Intermediaries increase the efficiency of the software distribution market. Research design, Data, and Methodology - This study presents the analysis of data gathered online to determine the extent of the impact of the intermediaries on the OSS market. Data was collected using an online survey, conducted by building a personal search robot (web crawler). The survey period lasted 9 days during which a total of 233,021 data points were gathered from sourceforge.net and Apple's App store, the two most popular software intermediaries in the world. The data collected was analyzed using Google's Motion Chart. Results - The study found that, beginning 2006, the production of OSS in the Sourceforge.net increased rapidly across the board, but in the second half of 2009, it dropped sharply. There are many events that can explain this causality; however, we found an appropriate event to explain the effect. It was seen that during the same period of time, the monthly production of OSS in the App store was increasing quickly. The App store showed a contrasting trend to software production. Our follow-up analysis suggests that appropriate intermediaries like App store can enlarge the OSS market. The increase was caused by the appearance of B2C software intermediaries like App store. The results imply that OSS intermediaries can accelerate OSS software distribution, while development of a better online market is critical for corporate users. Conclusion - In this study, we analyzed 233,021 data points on the online software marketplace at Sourceforge.net. It indicates that OSS Intermediaries are needed in the software distribution market for its vitality. It is also critical that OSS intermediaries should satisfy certain qualifications to play a key role as market makers. This study has several interesting implications. One implication of this research is that the OSS intermediary should make an effort to create a complementary relationship between OSS and Proprietary Software. The second implication is that the OSS intermediary must possess a business model that shares the benefits with all the participants (developer, intermediary, and users).The third implication is that the intermediary provides an OSS of high quality like proprietary software with a high level of complexity. Thus, it is worthwhile to examine this study, which proves that the open source software intermediaries are essential in the software distribution channel.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.04a
• /
• pp.307-316
• /
• 2000

MP3(MPEG 1 layer 3) 파일 형식(file format)은 최근 높은 압축율과 뛰어난 음질 복원 능력으로 주목을 받고 있다. 실제로 MP3의 압축율은 CD의 약 50분의 1 정도이고 음질은 CD 음질을 동일한 수준으로 유지할 수 있다.한편, 이러한 MP3의 장점 때문에 web을 통해 MP3 파일을 찾으려는 수요는 폭발적으로 증가하고 있지만 기존의 검색 엔진들이 가지고 있는 프로세스는 급속하게 update되고 있는 MP3 컨텐츠에 효과적으로 대응하지 못하고 있는 실정이다. 특히, 기존의 검색 엔진들은 미디어 파일을 위한 검색이 아닌 문자 기반의 검색 기능을 위해 개발되어 MP3 검색에는 부적절하거나, 파일 중심이 아닌 사이트 중심의 링크 변동에 대하여 수동적인 업데이트만을 수행하여 빠른 변화에 능동적으로 대응하기 어려운 경우가 많다.현재 미디어 파일을 위한 검색 엔진들은 여럿 서비스 중이지만, 텍스트 중심의 탐색 방법을 사용하고, 정기적인 DB update 방법에 관해서도 문자 기반의 검색 엔진과 동일한 방법을 사용하고 있다. 또한, 국내에서는 web 서비스를 위한 미디어 파일 탐색 알고리즘과 지능형 탐색 방법에 등에 관한 연구 역시 거의 전무한 상태이다.본 논문은 MP3 파일 전문 검색을 위한 지능형 프로세스를 설계와 구현 결과에 관한 것으로, 기존의 미디어 검색 엔진들이 가지는 문제점을 지적하고 보다 효율적이고 능동적인 미디어 파일 탐색을 위한 방법을 제시한다. 특히, MP3 파일에 대한 미디어 파일 검증 알고리즘과 verification method을 제안하고, 이러한 메커니즘에 따라 구현된 지능형 robot과 spider 등으로 구성된, 신뢰성 있고 지능적인 MP3 검색 엔진 지원 시스템의 설계와 구현 결과 그리고 성능 등을 종합적으로 요약한다.실어증 환자들은 화시적 대명사를 조응적 대명사보다 더 잘 처리하는 동일한 결과를 보였다. 이러한 실험 결과들은 실어증 환자들이 뇌손상으로 인해 문법적 언어처리에는 어려움을 보이지만 비언어적인, 세상 지식과 관련된 화시적 대명사의 처리는 가능할 것이라는 가설을 뒷받침 해준다. 또한 이러한 실험 결과를 통해 대명사의 기능적인 측면에서 화시와 조응의 처리가 구분되어 있음을 보여준다.l mechanism is concentrate on only the reaction zone. As strain rate and CO2 quantity increase, NO production is remarkably augmented.our 10%를 대용한 것이 무첨가한 것보다 많이 단단해졌음을 알 수 있었다. 혼합중의 반죽의 조사형 전자현미경 관찰로 amarans flour로 대체한 gluten이 단단해졌음을 알수 있었다. 유화제 stearly 칼슘, 혹은 hemicellulase를 amarans 10% 대체한 밀가루에 첨가하면 확연히 비용적을 증대시킬 수 있다는 사실을 알 수 있었다. quinoa는 명아주과 Chenopodium에 속하고 페루, 볼리비아 등의 고산지에서 재배 되어지는 것을 시료로 사용하였다. quinoa 분말은 중량의 5-20%을 quinoa를 대체하고 더욱이 분말중량에 대하여 0-200ppm의 lipase를 lipid(밀가루의 2-3배)에 대하여 품질개량제로서 이용했다. 그 결과 quinoa 대량 7.5%에서 비용적, gas cell이 가장 긍정적 결과를 산출했고 반죽의 조직구조가 강화되었다. 또 quinoa 대체에 의해 전분-지질 복합제의 흡열량이 증대된 것으로부터 전분-지질복합제의 형성 촉진이 시사되었다.이것으로 인하여 호화억제에 의한 노화 방지효과가 기대되었지만

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.17-21
• /
• 2015

There have been sustained developments of advanced technologies using traffic safety facilities recently and techniques for identifying failure modes and devices which could result in fatal outcomes. The purpose of this research is aimed at improving the driving conditions in advance through analyzing the IT convergence, driving education, researches for vehicles, field of construction and robotics. The researchers evaluate on usability tests of the driving with 26 candidates through focusing on safety, convenience, efficiency, effectiveness. Using specialized LED panel to enhance driving performances of disabled people are for cautious road conditions like foggy weather or heavy rain. As a result, there were improvements in the driving conditions, and candidates reported this system was helpful. It allows them for maintaining proper driving all times and was especially informative for people with low vision or visually impaired. This system plays a pivotal role as a prevention mechanism not only for regular drivers but also for further delict of traffic violations or accident offenders who already have former record on tort.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.390-397
• /
• 2019

A mechanical model of band sawing saw frame was established according to an analysis of a commonly used saw-frame structure diagram to overcome the problems of low service life, substandard cutting precision and efficiency, and high manufacturing cost caused by the unreasonable design of saw frame. Taking a particular type of sawing machine as an example, stress cycle analysis of the saw blade was carried out according to the mechanical model of the saw frame, and the fatigue analysis model of the most dangerous cross-section point that was most prone to fatigue failure of the saw blade was then established. The fatigue analysis result was used as the basis for the improved design of the saw frame, and the improved detailed saw-frame design parameters were obtained. The results suggested that the saw frame system is much more compact and the saw blade force met the fatigue strength requirements through the improved design. In addition, the service life of the saw blade and the cutting precision were increased. The established mechanical model of the saw frame in this paper is used widely and has high practical application values.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.138-147
• /
• 2007

Metabolic pathway is a series of chemical reactions occuning within a cell and can be used for drug development and understanding of life phenomenon. Many biologists are trying to extract metabolic pathway information from huge literatures for their metabolic-circuit regulation study. We propose a text-mining technique based on the keyword and pattern. Proposed technique utilizes a web robot to collect huge papers and stores them into a local database. We use gene ontology to increase compound recognition rate and NCBI Tokenizer library to recognize useful information without compound destruction. Furthermore, we obtain useful sentence patterns representing metabolic pathway from papers and KEGG database. We have extracted 66 patterns in 20,000 documents for Glycosphingolipid species from KEGG, a representative metabolic database. We verify our system for nineteen compounds in Glycosphingolipid species. The result shows that the recall is 95.1%, the precision 96.3%, and the processing time 15 seconds. Proposed text mining system is expected to be used for metabolic pathway reconstruction.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.29-37
• /
• 1999

In general, the information processing capability of a neural network is determined by its architecture and efficient training patterns. However, there is no systematic method for designing neural network and selecting effective training patterns. Evolutionary Algorithms(EAs) are referred to as the methods of population-based optimization. Therefore, EAs are considered as very efficient methods of optimal system design because they can provide much opportunity for obtaining the global optimal solution. In this paper, we propose a new method for finding the optimal structure of neural networks based on competitive co-evolution, which has two different populations. Each population is called the primary population and the secondary population respectively. The former is composed of the architecture of neural network and the latter is composed of training patterns. These two populations co-evolve competitively each other, that is, the training patterns will evolve to become more difficult for learning of neural networks and the architecture of neural networks will evolve to learn this patterns. This method prevents the system from the limitation of the performance by random design of neural networks and inadequate selection of training patterns. In co-evolutionary method, it is difficult to monitor the progress of co-evolution because the fitness of individuals varies dynamically. So, we also introduce the measurement method. The validity and effectiveness of the proposed method are inspected by applying it to the visual servoing of robot manipulators.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.89-96
• /
• 2009

As increasing the number of digital control devices installed on aircrafts and their transmission speed, various digital data buses have been introduced to provide reliable and high-speed characteristics. These characteristics of avionics data bus are highly related on the fault-tolerant performance which can make minimize jitter and loss during data transfer. In this paper, we concerned about a new traffic shaping scheme for increasing the reliability of Avionics Full Duplex Switched Ethernet (AFDX) systems based on ARINC 664 standard. We note that the conventional AFDX with a single regulator per virtual link system may produce aggregated traffics as the number of virtual links increasing. The aggregated traffic results in large jitters among frames. To remedy for the jitter and loss of data, we propose a dual regulator scheme for the AFDX system. The purpose of the additional regulator is to additionally regulate aggregated traffics from a number of per virtual link regulators. Using NS-2 simulator, we show that the proposed scheme provides a better performance than the single regulator one. It is worthwhile note that the proposed AFDX with Dual Regulator scheme can be employed to not only aircraft networks but other QoS sensitive networks for robot and industrial control systems.