• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권9호
• /
• pp.423-429
• /
• 2001

This paper proposes adaptive impedance control algorithm using fuzzy inference when robot contacts with its environments. The characteristics of the adaptive impedance controller is to adapt with parametric uncertainty and nonlinear conditions. The control algorithm is to join impedance controller with fuzzy inference engine. The proposed control method overcomes the problem of impedance controller using gain-tuning algorithm of fuzzy inference engine. We implemented an experimental set-up consisting of environment-generated one-link robot system and DSP system for controller development. We apply the adaptive fuzzy impedance controller to one-link root system, and it shows the good performance on regulating the interactive force in case of contacting with arbitrary environment.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1125-1131
• /
• 2012

농촌 노동력의 급격한 감소 및 고령화에 따라 저가의 농업로봇의 개발이 시급한 과제가 되어왔다. 본 논문에서는 농업용 방제 로봇의 H/W제어구조 및 S/W 플랫폼 개발에 대하여 기술한다. 개발된 로봇은 2 축의 캐터필러형 구동부와 2축의 방제기구 제어부를 구동부로 갖추고 있다. H/W 제어구조로써, 임베디드 XPE 기반 로봇 제어부, 원격 조종부, 그리고 센서 제어부로 구성된다. SW 플랫폼에서는 태스크 매니저, 원격 영상 및 데이터 통신을 위한 TCP-IP 통신 프로세스, 구동부 제어 프로세스, 위치 및 환경 인식 프로세스, 센서제어부 프로세스 등 5개의 프로세스가 동시에 동작한다. 개발된 농업용 원격 방제로봇을 필드테스트를 통하여 유용성을 시험하였다.

• 한국정보통신학회논문지
• /
• 제16권2호
• /
• pp.228-236
• /
• 2012

본 논문에서는 빠르고 조작이 간편한 이동 수단인 이륜 역진자 로봇을 기존의 방법보다 더욱 안정적으로 밸런싱하기 위한 제어기를 설계하였다. 먼저 이륜 역진자 로봇의 제어기를 퍼지제어 구조로 선택하고, 지정된 3명의 사용자 무게에 따라 적절한 소속함수 요소 값들을 시행착오적으로 구하였다. 임의의 무게에 대한 적절한 퍼지 소속함수 요소 값을 구하기 위해 앞의 3명의 무게에 따른 퍼지 소속함수 요소 값들을 신경회로망으로 튜닝한 뒤 퍼지 제어기에 적용하여 보다 안정적인 제어가 가능하도록 제어기를 설계하였다. 설계된 제어기를 시뮬레이션 하여본 결과, 기존의 퍼지 제어기에 비해서 본 논문에서 제안한 신경회로망으로 튜닝한 퍼지제어기가 보다 안정적인 제어가 가능함을 확인할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제3권4호
• /
• pp.363-372
• /
• 1997

In this paper, the design and the implementation of the adaptive learning rate neural network controller for an articulate robot, which is being developed (or) has been developed in our Automatic Control Laboratory, are mainly discussed. The controller reduces software computational load via distributed processing method using multiple CPU's, and simplifies hardware structures by the time-division control with TMS32OC31 DSP chip. Proposed neural network controller with adaptive learning rate structure using expert's heuristics can improve learning speed. The proposed controller verifies its superiority by comparing response characteristics of conventional controller with those of the proposed controller that are obtained from the experiments for the 5 axis vertical articulated robot. We, also, present the generalization property of proposed controller for unlearned trajectory and the change of load through experimental data.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.969-980
• /
• 2018

This paper aims to design of the neutrosophic fuzzy-PID controller and it has been compared with the conventional fuzzy-PID controller for position tracking control in terms of robustness. In the neutrosophic fuzzy-PID controller, error (e) and change of error (ce) were assessed separately on two fuzzy inference systems (FISs). In this study, the designed method is different from the conventional fuzzy logic controller design, membership degrees of antecedent variables were determined by using the T(true), I(indeterminacy), and F(false) membership functions. These membership functions are grouped on the universe of discourse with the neutrosophic set approach. These methods were tested on three-dimensional (3-D) position-tracking control application of a spherical robot manipulator in the MATLAB Simulink. In all tests, reference trajectory was defined for movements of all axes of the robot manipulator. According to the results of the study, when the moment of inertia of the rotor is changed, less overshoot ratio and less oscillation are obtained in the neutrosophic fuzzy-PID controller. Thus, our suggested method is seen to be more robust than the fuzzy-PID controllers.

• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.148-154
• /
• 2009

In this paper, an embedded Kalman filter for a time-delayed controller is designed on an FPGA to estimate accelerations of the robot arm. When the time-delayed controller is used as a controller, the inertia estimation along with accelerations is needed to form the control law. Although the time-delayed controller is known to be robust to cancel out uncertainties in the nonlinear systems, performances are very much dependent upon estimating the acceleration term ${\ddot{q}}(t-{\lambda})$ along with inertia estimation ${\hat{D}}(t-{\lambda})$. Estimating accelerations using the finite difference method is quite simple, but the accuracy of estimation is poor specially when the robot moves slowly. To estimate accelerations more accurately, various filters such as the least square fit filter and the Kalman filter are introduced and implemented on an FPGA chip. Experimental studies of following the desired trajectory are conducted to show the performance of the controller. Performances of different filters are investigated experimentally and compared.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.809-817
• /
• 2018

The model predictive controller performance of the mobile robot is set to an arbitrary value because it is difficult to select an accurate value with respect to the controller parameter. The general model predictive control uses a quadratic cost function to minimize the difference between the reference tracking error and the predicted trajectory error of the actual robot. In this study, we construct a predictive controller by transforming it into a quadratic programming problem considering velocity and acceleration constraints. The control parameters of the predictive controller, which determines the control performance of the mobile robot, are used a simple weighting matrix Q, R without the reference model matrix $A_r$ by applying a quadratic cost function from which the reference tracking error vector is removed. Therefore, we designed the predictive controller 1 and 2 of the mobile robot considering the constraints, and optimized the controller parameters of the predictive controller using a genetic algorithm with excellent optimization capability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.247-250
• /
• 2003

In this paper, we propose a robust controller for motion control of n-link robot manipulators using visual feedback. The desired joint velocity and acceleration is obtained by the feature-based visual systems and is used in the joint velocity control loop for trajectory control of the robot manipulator. We design a robust controller that compensates for bounded parametric uncertainties of robot dynamics. The stability analysis of robust joint velocity control system is shown by Lyapunov Method. The effectiveness of the proposed method is shown by simulation results on the 5-link robot manipulators with two degree of freedom.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.30-32
• /
• 2005

Mobility of an indoor wheeled robot is affected by adhesion force that is related to various floor conditions. When the adhesion force between driving wheels and floor decreases suddenly, the robot begins slip. In order to overcome this slip problem, optimal slip velocity must be decided for stable movement of wheeled robot. First of all, this paper shows that conventional PI control can not be applied to a wheeled robot of the light weight. Secondly, proposed fuzzy logic is applied to the Takagi-Sugeno model for the configuration of fuzzy sets. For the design of Takagi-Sugeno model and fuzzy rule, proposed algorithm uses FCM(Fuzzy c-mean clustering method) algorithm. The proposed fuzzy logic controller(FLC) is pretty useful with prevention of the slip phenomena for the controller performance in the re-adhesion control strategy.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.374-381
• /
• 2016

The sealing technique is widely used for repairing the cracks on the surface of concrete and preventing their expansion in the future. However, it is difficult to ensure the safety of the workers when sealing large structures in inconvenient working environments. This paper presents the development of a sealing robot system to seal various shapes of concrete surface in rough conditions for a long time. If the robot can maintain the desired contact force, the cracks can be completely sealed. An impedance force tracking controller with slope estimator is proposed to calculate the surface slope in real time using the robot position. It predicts the next point in order to prevent the robot from disengaging from the contact surface owing to quick slope changes. The proposed method has been verified by experimental results.