• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.140-146
• /
• 2007

This paper demonstrates the development of a mobile robot for patrol. We fuse differential GPS, angle sensor and odometry data using the framework of extended Kalman filter to localize a mobile robot in outdoor environments. An important feature of road environment is the existence of curbs. So, we also propose an algorithm to find out the position of curbs from laser range finder data using Hough transform. The mobile robot builds the map of the curbs of roads and the map is used fur tracking and localization. The patrol robot system consists of a mobile robot and a control station. The mobile robot sends the image data from a camera to the control station. The remote control station receives and displays the image data. Also, the patrol robot system can be used in two modes, teleoperated or autonomous. In teleoperated mode, the teleoperator commands the mobile robot based on the image data. On the other hand, in autonomous mode, the mobile robot has to autonomously track the predefined waypoints. So, we have designed a path tracking controller to track the path. We have been able to confirm that the proposed algorithms show proper performances in outdoor environment through experiments in the road.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.1
• /
• pp.48-53
• /
• 2009

In this paper, we propose an efficient method of representing human emotions that are conveyed during conversations. In order to develop a robot that comes close to thinking, acting, and expressing like humans, many researches have been conducted. Among these researches, the proposed method is developed based upon 6 emotion identification systems. The proposed method first analyzes conversations between humans, decides an emotion on the basis of the analysis, and represents the emotion by an action, an image, and a sound. We implemented the proposed method using a hand-sized robot.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.103-106
• /
• 1996

In this paper, we proposed the design and algorithm of force reflection joystick which control mobile robot as a rehabilitation assistance system. The disabled persons are poor at joystick control because of hand vibration and clumsiness in operating it. These problems bring tasks which concerned with operator's safety So there is required technique which prevent collision with wall or obstacles. One of these solution is force reflection joystick which disturb that robot is closed to the wall. To confirm this way, we experimented and simulated with force reflection joystick which attached torque controller.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.4
• /
• pp.233-238
• /
• 2014

In this paper, we developed a finger robot simulating spasticity and contracture which can be used as a testing bed for evaluating performance of hand rehabilitation devices while it can be also used to train clinicians for improving reliability of clinical assessment. The robot is designed for adult finger size and for independent control of Metacarpophalangeal Joint and Proximal Interphalangeal Joint. Algorithm for mimicking spasticity and contracture is implemented. By adjusting the parameters related to contracture and spasticity, the robot can mimic various patterns of responses observed in fingers with spasticity and contracture.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.1
• /
• pp.35-42
• /
• 2020

In this paper, we propose a method to keep the robot at a distance of 30 to 45cm from the user in consideration of each individual's minimum area and inconvenience by using a 2D LiDAR sensor LDS-01 as the secondary sensor along with a QR code. First, the robot determines the brightness of the video and the presence of a QR code. If the light is bright and there is a QR code due to human's presence, the range of the 2D LiDAR sensor is set based on the position of the QR code in the captured image to find and follow the correct target. On the other hand, when the robot does not recognize the QR code due to the low light, the target is followed using a database that stores obstacles and human actions made before the experiment using only the 2D LiDAR sensor. As a result, our robot can follow the target person in four situations based on nine locations with seven types of motion.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2430-2432
• /
• 2002

We made a master hand which can be used as tool for getting grasping data. By using the data from the master hand, we analyzed grasping patterns of human hands. Based on this analyzed results, we developed an grasping algorithm for some particular hand actions. To develop the above algorithm, we programmed a 3D simulation S/W using Visual C++. And we made a slave hand to prove the validity of the proposed algorithm.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.71-80
• /
• 2006

A construction robot has been developed for higher productivity and better safety in various construction fields. Especially, curtain wall is suitable for outer wall material of tall commercial building and apartment complexes. This heavy material is, however, hard to install with a manpower and outdated equipment. For this reason, the prototype of ASCI (Automation System for Curtain wall Installation) was developed. This system has a robot controller(i.e. hand-held remote control unit) for the transfer information signal between human operator and robot system. Although study has been conducted on manual controller of ASCI, hardly any information is known about the operator's opinion. In this study, a questionnaire was completed by operator to get their opinion about aspects which need to design a more comfortable and productive manual controller of construction machinery, robot included. Through the result of study, it is expected that this technical data is contributed to the robot controller design for comfort and productivity of various industrial machinery.

• Journal of Practical Engineering Education
• /
• v.14 no.3
• /
• pp.543-553
• /
• 2022

A collaborative robot(Cobot) is one of the production systems presented in the 4th industrial revolution and are systems that can maximize efficiency by combining the exquisite hand skills of workers and the ability of simple repetitive tasks of robots. Also, research on the development of an efficient interface method between the worker and the robot is continuously progressing along with the solution to the safety problem arising from the sharing of the workspace. In this study, a method for controlling the robot by recognizing the worker's hand signal was presented to enhance the convenience and concentration of the worker, and the safety of the worker was secured by introducing the concept of a safety zone. Various technologies such as robot control, PLC, image processing, machine learning, and ROS were used to implement this. In addition, the roles and interface methods of the proposed technologies were defined and presented for using educational media. Students can build and adjust the educational media system by linking the introduced various technologies. Therefore, there is an excellent advantage in recognizing the necessity of the technology required in the field and inducing in-depth learning about it. In addition, presenting a problem and then seeking a way to solve it on their own can lead to self-directed learning. Through this, students can learn key technologies of the 4th industrial revolution and improve their ability to solve various problems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.590-593
• /
• 2001

In this paper we describe the 6-axes robot's position determination using a stereo vision and an image based control method. When use a stereo vision, it need a additional time to compare with mono vision system. So to reduce the time required, we use the stereo vision not image Jacobian matrix estimation but depth estimation. Image based control is not needed the high-precision of camera calibration by using a image Jacobian. The experiment is executed as devide by two part. The first is depth estimation by stereo vision and the second is robot manipulator's positioning.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.81-92
• /
• 1989

This paper presents a simple identification method of the actual kinematic parameters for the robot with parallel joints. It is known that Denavit-Hartenberg's coordinate system is not useful for nearly parallel joints. In this paper, the coordinate frames are reassigned to model the kinematic parameter between nearly parallel joints by four parameters. The proposed identification method uses a straight ruler about 1m long. A robot hand is placed by using a teaching pendant at the prescribed points on the ruler, and corresponding error function is defined. The identified kinematic parameters which make the error function zero are obtained by iterative least square error method based on the singular value decomposition. In the compensation of joint angles, only the position is considered because the usual applications of robot do not require a precise orientation control.