• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제16권2호
• /
• pp.83-91
• /
• 2017

The Manual on Uniform Traffic Control Devices advises that, "Signs should be placed on the right side of the roadway where they are easily recognized and understood by road users." Guidance is provided on the spacing and prioritization of signs, and in some conditions, additional steps may be needed to ensure that signs are conspicuous. This study proposes a design methodology using ergonomics concepts applied to traffic sign and street name signs. Initially, a literature revision on cognitive ergonomics is performed. Several design methodologies are analyzed and the aspects to be considered in traffic signs are selected.. In this study, problems of traffic signs in Korea were identified through the comparative analysis of domestic and foreign traffic signs and a prototype of ergonomic traffic sign was developed based on the analysis results. And the driver's views on the developed traffic sign were investigated. In addition, based on the results of this study, this study is to provide the necessary foundation for improving traffic signs in order to help the various age groups of drivers to reach their destinations without difficulties when they drive.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제5권2호
• /
• pp.115-134
• /
• 2003

Recently, there are many cases in the roadway design for successive tunnel with small distance between two tunnels. In this case, the degree of interference for successive tunnels is a significant consideration in the design of ventilation systems. Also, Re-inflows of contaminated air in successive tunnel make serious ventilation problems in case of fire accident in the tunnel. In this study, for successive tunnels in Donghae highway project, the concentration of contaminant such as CO, NOx and Smoke were calculated by numerical analysis using 1D and 3D-CFD analysis. And, the rate of re-inflow at the portals of successive tunnel according to the direction of wind were analysed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제17권6호
• /
• pp.50-60
• /
• 2013

Dynamic response of steel plate girder bridges by KL-510 design truck in KHBDC considering the road surface roughness of bridges and bridge-vehicle interaction is investigated. Simply supported steel plate girder bridges with span length of 20m, 30m, and 40m from "Standard Highway Bridge Superstructure" published by the Korean Ministry of Construction are used for a bridge model, and ten sets of the road surface roughness of bridge deck are generated from power spectral density (PSD) function by assuming the roadway as "Average Road". A three dimensionally modeled 5-axle tractor-trailer with its gross weight, which is the same as that of KL-510 design truck, is used for dynamic analysis. For the finite element modeling of superstructure, beam element for the main girder, shell element for the concrete deck, and rigid link between main girder and concrete deck are used. Impact factor and DLA of steel plate girder bridges for different span are calculated by the proposed numerical analysis model and compared with those specified by several bridge codes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제26권1호
• /
• pp.1-9
• /
• 2022

De -icing salts have been used commonly in areas where snow or ice is a seasonal safety hazard for roadway, however, the salts is one of main causes on serious deterioration of road infrastructures in crowded urban city like Seoul. In order to establish maintenance strategy of road infrastructures under de-icing salts laden environment, it is necessary to examine environmental characteristics and its response to the existing facilities. The purpose of this study is to evaluate the deterioration environment of road infrastructures. Additional purpose is to develop a design model and details for durability design of infrastructures under de-icing salts laden environment, considering mainly a build-up rate of surface chlorides. Concentration of external chloride solution and surface chloride content were calculated at the level of average de-icing salts for 5 years, ratio of auxiliary road of 17.5 to 30%, and effective exposure area to snow 50 to 80%. The chloride build-up rate was 0.073 ~ 0.077% / year and the maximum surface chloride content was calculated to be 2.2 ~ 2.31% by concrete wt. This study is expected to be used for establishing integrated strategy of road infrastructures, such as predicting chloride profiles or degree of chemical corrosion to exposure concrete.

• Journal of Korean Society of Transportation
• /
• 제27권4호
• /
• pp.155-166
• /
• 2009

Road design safety assessment by existing tools and methods have normally been examined by expert judgements using design documents and on-site inspections. The existing methods, however, have two main problems such as insufficiency of objectiveness and inability to measure effects of accident countermeasures. This paper studies ways to develop a road safety assessment system through reviewing the IHSDM developed in USA. The crash prediction module of IHSDM calculate accident frequency and rate of roadway segments using accident prediction models and accident modification factors for safety evaluation. The methodology of evaluation and development of accident modification factors somewhat overcome the problems of the existing methods. In spite of these advantages, IHSDM could not relevantly reflect characteristics of domestic rural roadways since it overestimate the number of accidents and rate of korean rural roadways. Especially, IHSDM may not evaluate or consider land use patterns of Korean roadways, and futhermore, original environment on base conditions used to develop IHSDM may not be different from ours. The user requirements being developed for a road safety assessment system for Korean roadways include enhanced flexibility and diversity of data input-output processes.

• Journal of the Korea Concrete Institute
• /
• 제15권5호
• /
• pp.705-714
• /
• 2003

Even though Korean peninsula is located in regions of moderate seismic risks, current seismic design provisions of the roadway bridge design code have adopted the AASHTO code which is based on the requirements for high seismic regions. The objective of this research is to investigate the seismic performance of circular reinforced concrete (RC) bridge piers with limited ductility, which may be desirable in low or moderate seismic regions, such as in Korea. Four test specimens were designed and constructed. The reference specimen was designed with longitudinal steel ratio as 1.01% and the confinement reinforcement ratio as 0.13% without considering earthquake, and three other test specimens were designed in accordance with a limited-ductility concept as 0.3% for the confinement steel ratio. This confinement ratio is 0.32 times of minimum lateral reinforcement specified in current seismic design provisions, and 2.3 times of lateral reinforcement required in nonseismic design provisions. The pseudo-dynamic test was carried out to evaluate the seismic performance of full-scale specimens in size of 1.2m diameter and 4.8m height. Judging from the experiment, the reference specimen was not satisfactory for the demand displacement ductility ${\mu}$=5.0, but three limited-ductility specimens appeared to have the displacement ductility of more than 5.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제13권3호
• /
• pp.47-65
• /
• 2014

VMS(Variable Message Sign) helps drivers to choose their path to destinations on roadways. Some types of VMS often provide traffic information with clearly visible and comprehensible graphical route diagrams. Currently many diagramed types of VMS are installed on urban arterial and highways. This type of VMS surely enhances drivers' ability to comprehend traffic route information while they are driving on the roadway. Nevertheless, some of them are presented with so much information and design elements and they sometimes lead to decline of drivers' comprehensible level for traffic information. Drivers would fail to decide their preferable route in this state of information overflow. The purpose of this paper is to develop a drivers preference model for effective design principle including size and height of displaying font, and the amount of information in the route diagram considering driving speed, sex and age of the driver. This model is developed using structural equation modeling techniques. This model considers driver's emotional factor and, human factor and design component of route diagram. To collect data, we built driving simulator which is able to replicate real driving condition. 72 people who participated in the simulation were selected considering gender and age. The developed model showed that the amount of information, and visibility are more influential factors to the drivers' preference of the route diagram on VMS than design elements such as the shape and the font of the diagram.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제7권6호
• /
• pp.121-132
• /
• 2008

Recently, there is a growing interest in promoting safe and convenient roadway and traffic conditions for elderly drivers. This paper analyzed the driving characteristics, self recognition, and any inconvenience of elderly drivers over age 65 through an extensive survey, and drew some action plans to improve the driving conditions for elderly drivers. Survey results showed that the major trip purposes of the elderly driver were found to be commuting(50%) and business(33%), and this pattern was similar to the general drivers. The elderly drivers are interested in "safety", but "brand recognition" was the more important factor for the general drivers in the process of vehicle selection. The elderly drivers had no technical skill difference in driving as compared to the general drivers, but they fully recognized the physical deterioration such as reaction time and sight distance. In addition, the elderly drivers had a tendency to feel psychological contraction as to high workload driving conditions, thus it was necessary to make safe driving conditions by improving the design elements of traffic control devices on the roadways including visibility.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제35권6호
• /
• pp.1413-1420
• /
• 2015

On the design phase of small size bridge, owing to the lack of related guidelines or standards to determine a superstructure type of bridge, many designers tend to select the type depending on expert's experience and knowledge. Moreover, recently, as types of bridge superstructure become diverse and more conditions need to be considered in the project, the decision makes process become complex. This research covered the selection of a superstructure type of a middle or small size bridge with span length of about 50m, which frequently built for national roadway, selecting type of bridge superstructure more systematic way rather than the existing ways to compare construction methods or to depend on expert's experiences. This study proposes to build a bridge superstructure type selection model using one of the techniques of artificial intelligence techniques SVM by applicability of the model examined through the verification of the actual case.

• Tunnel and Underground Space
• /
• 제13권3호
• /
• pp.196-206
• /
• 2003

In order to investigate the workability of Raise Boring Machine(RBM) such as utilization, penetration rate and advance rate, a vertical shaft of 98 m in length and 3.05 m in diameter was constructed in the layer of conglomerate by using the RBM in this study. In addition, field data from tow different construction sites including water-pump power plant tunnel, roadway tunnel and mining tunnel by RBM were collected and analyzed. The results show that the average weekly bored length is 19.3 m and its average utilization is between 54.3 % and 75.1 % very higher than that of the TBM(Tunnel Boring Machine). It also turns out that the bit force increases linearly with respect to the increase of the RPM(revolution per minute) of RBM. However, the net penetration rate decreases with the increase of bit force, RPM of RBM and depth of shaft. The findings of this study can be used to provide the useful information for the design of shaft and the selection of RBM.