• Asian Journal of Atmospheric Environment
• /
• v.9 no.1
• /
• pp.22-30
• /
• 2015

This study evaluated road shape and roadside barrier impact on near-road air pollution dispersion using FLUENT computational fluid dynamics (CFD) model. Simulated road shapes are three types, namely at-grade, depressed, and filled road. The realizable k-${\varepsilon}$ model in FLUENT CFD code was used to simulate the flow and dispersion around road. The selected concentration profile results were compared with the wind tunnel experiments. The overall concentration profile results show good agreement with the wind tunnel results. The results showed that noise barriers, which positioned around the at-grade road, decrease the horizontal impact distance (In this study, the impact distance was defined as the distance from road surface origin coordinate to the position whose mass fraction is 0.1.) lower 0.33~0.65 times and change the vertical air pollution impact distance larger 2.0~2.27 times than those of no barrier case. In case of filled road, noise barriers decrease the horizontal impact distance lower 0.24~0.65 times and change the vertical air pollution impact distance larger 3.33~3.55 times than those of no barrier case. The depressed road increase 1.53~1.68 times the vertical air pollution impact distance. It contributes the decrease of horizontal air pollution impact distance 0.32~0.60 times compare with no barrier case.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.888-908
• /
• 2011

The increasing demand from passengers in vehicles to improve safety, traffic efficiency, and comfort has lead to the growing interest of Wi-Fi based vehicle-to-infrastructure (V2I) communications. Although the V2I system provides fast and cost-effective Internet connectivity to vehicles via roadside Wi-Fi access points (APs), it suffers from frequent handoffs due to the high mobility of vehicles and the limited coverage of Wi-Fi APs. Recently, the Mobile AP (MAP) platform has emerged as a promising solution that overcomes the problem in the V2I systems. The main advantage is that MAPs may yield longer service duration to the nearby vehicles that have similar mobility patterns, yet they provide smaller link capacities than the roadside APs. In this paper, we present a new association control technique that harnesses available connection duration as well as achievable link bandwidth in high-speed vehicular network environments. We also analyze the tradeoff between two association metrics, namely, available connection duration and achievable link bandwidth. Extensive simulation studies based on real traces demonstrate that our scheme significantly outperforms the previous methods.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.159-165
• /
• 2012

PURPOSES : The lack of details of guidelines on how to install the Chicane for traffic calming leads the practical difference across the calming areas, so the benefits expected from these facilities are not hardly observed. In this context, this study analysed the relationship between the geometric design alternatives of Chicane with the dynamic behaviour of vehicles in terms of speed and trajectory. METHODS : The study analysed vehicle dynamic behaviour using dynamic analysis program Auto-Turn under various geometric conditions of Chicane. RESULTS : This study suggested the design alternatives of Chicane using terms such as "longitudinal displacement value", "lateral displacement value", etc. which are defined in the study. The suggested combination set is fulfilling the desired or target speed of vehicles and clearance between vehicle and roadside at the same time. CONCLUSIONS : The results from this study can be applied to install Chicane corresponding to the local condition where target speed is 30km/h. The study showed the design alternatives of chicane corresponding to the given road cross-sectional design and clearance to roadside for passenger cars and light truck respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.390-397
• /
• 2011

In this study, bending test was conducted as beam members in timber roadside safety barrier. The flexural properties of pitch pine round timber according to the diameters were evaluated. And then grading based on the growth characteristics applied to choosing the pitch pine round timbers which is met the criteria of guideline (Japan, 2008). MOR of round timber 160 mm is higher than other specimens from 100 mm to 140 mm. Because of lower juvenile wood ratio and higher density. The MOE of round timber is decreased according to the increment of diameter. Only 32% of the specimens has passed the limitations. Performance of pitch pine round timbers has confirmed to suitability roadside safety beam members according to the guideline (Japan, 2008).

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1988

This study was carried out to measure the contents of soluble sulfur and heavy metals in the leaves of roadside tree at 34 sampling sites of Seoul area from the Sep. 1 to Sep. 30 during 1985 and 1986. The results were as follows; 1. Average contents of soluble sulfur at all sampling sites were; Plantanus orientalis 0.474%, Ginkgobioloba 0.562%, and Salix pseudolasiogyne 0.566%. 2. Correlation between sulfur dioxide concentration in the air and soluble sulfur in the leaves by area were; Green belt area R = 0.985, Residential area R = 0.856, Commercial area R = 0.668, Industrial area R = 0.886. Correlation by species were ; Platanus orientalis R = 0.817, Ginkgobiloba R = 0.771, Salix pseudo-lasiogyne R = 0.824. 3. Correlation between $SO_X$ concentration in the air and sulfur contents in the leaves showed positive significance. 4. Contents of soluble sulfur in the heavy traffic area were higher than that of light traffic area. 5. Heavy metal contents of 1986 were higher than that of 1985; Fe> Mn > Zn > Pb > Cu > Cd > Cr. 6. Lead contents in the leaves of 1986 were; Platanus orientalis 16, 701 ppm, Gingobiloba 21,729ppm, Salix Pseudo-lasiogyne 12.418 ppm.

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.126-129
• /
• 2016

The risk of flooding and groundwater depletion is increasing due to the increase of impervious area in an urban area that reduces the volume of infiltration and increases the outflow of rainwater. The objective of this study is to examine the impact of installation of roadside tree protectors with infiltration pipes in terms of the change of the infiltration rate. Through this study, it has been attested that roadside tree protectors with infiltration pipes increased the infiltration rate and decreased water level on the ground, and could be applied in an urban area as the low impact development (LID) facilities.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.7-13
• /
• 2008

본 연구에서 개발한 노변 영상(roadside image) 취득 시스템은 효율적으로 도로 시설물들을 관리하기 위함이다. 복잡하고 긴 구간의 도로에 존재하는 도로 시설물을 인력을 사용하여 조사하기에는 많은 시간과 비용이 소요된다. 도로를 따라 움직이는 차량을 이용하는 경우에는 적은 인원과, 단시간에 노변에 설치된 시설물 등의 현황과 상태를 조사 할 수 있으며 도로 주변의 다양한 정보를 알 수가 있다. 또한, 차량에 장착된 GPS/INS 통합시스템을 사용하여 해당 영상의 정확한 위치 정보를 획득 할 수 있다. 그러나 선명한 영상을 취득하기 위해서 야외의 다양한 조건을 만족시키는 카메라와 렌즈의 선정이 중요하며, 이에 따른 동기화 장치(synchronization device)와 영상 획득 프로그램의 개발이 필요하다. 본 논문에서는 경기도 고양시를 대상으로 시험을 실시하였으며, 현재 시판되고 있는 최신의 다양한 종류의 카메라와 렌즈를 차량에 장착한 후 영상을 취득하여 연구에 적합한 하드웨어를 선정하였다. 또한 동기화 장치를 사용하여 DMI(Distance Measuring Instrument)에서 발생되는 트리거 신호를 입력받아 일정한 거리마다 영상을 취득하는 S/W와 동기화 장치의 성능을 테스트하였다. 취득된 노변 영상의 위치 정확도를 테스트하기 위해 DGPS 방법을 이용하여 후처리 하였으며, 레벨 2수준의 교통주제도에 차량의 이동궤적과 도로의 선형을 중첩하여 육안으로 비교 분석하였다. 취득된 노변 영상을 분석하여 지상 모니터링 분야에서 도로 주변 시설물의 변화 탐지에 이용이 가능한 대상 시설물 목록을 선정하였으며 매우 효율적으로 도로의 유지관리에 활용이 가능할 것으로 기대된다.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.18-26
• /
• 2001

The increase of economic growth has brought out the noise pollutions in city regions. To evaluate these problems, this study was investigated to assessment and analysis of noise pollutions at Cheongju area in winter and summer seasons. The noise levels were measured and analyzed at the general areas the 4 roadside areas (park, residential, commercial, and industrial area). As a result, following facts have been found. The equivalent sound levels(Leq) at general are in winter were 51.3∼78.2 dB(A) at the daytime and 41.1∼63.1 dB(A) at the nighttime And in summer there were 53.5∼77.3 dB(A) at the daytime and 41.9∼64.0 dB(A) at the nighttime, respectively. These values were higher than average value of Korea. At the roadside area, the values of Leq were 51.9∼72.8 dB(A) at the daytime, 44.3∼68.2 dB(a) at the nighttime in winter, and in summer there were 62.5∼73.1 dB(A) at the daytime and 50.4∼68.3 dB(A) at the nighttime, respectively. These values were lower than average value of Korea. The calculated traffic noise index(TNI) were 64.6∼93.6 at the daytime and 26.5∼106.6 at the nighttime in winter, In summer, there were 65.0∼90.7 at the daytime, and 32.3∼91.8 at the nighttime. The TNI values varied wide ranges at the nighttime according to traffic volumes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.550-555
• /
• 2011

The road traffic noise has emerged major noise as the overcrowding of the urban population and the explosion of car storage capacity. There are limits for establishing the measures to meet noise standard because of the increase of high-rise building and insufficient distance between residential areas and road in urban center areas. Therefore, this study analyze the problem of the application of national road noise standard, and present the alternatives to achieve environmental standards in conjunction with the soundproofing measures. To reduce the population ratio exposed to road noise on seoul motorway, we suggest some action plane are as follows: i) Roadside noise standard of nighttime beside daytime is the first noise reduction goals ii) Noise standard of Noise and vibration control act is priority in case of existing area iii) Noise standard of basic environmental policy act is priority in case of new area.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.159-167
• /
• 2013

PURPOSES : In this study, the effects of when median exclusive bus lanes were applied to Daejeon trunk road (Wolpyeng crossway~Seodaejeon crossway, 6.3km) and (Daeduck Bridge 4~Kyeryong 4, 2.6km) by Microscopic Simulation VISSIM (5.0) was studied. The median exclusive bus lanes are one of the measures of transportation system manage techniques that can especially improve the efficiency of public transportation facilities. METHODS : According to the analysis of VISSIM on the Gyerong mainroad and Daedeok mainroad, when the median exclusive bus lanes were applied unlike when the roadside bus-only lanes were applied, the average travel speed of vehicles decreased but the average delay time and travel time increased. This arised from the changes in the geometric structure of the road which occurred the reduction of vehicle lane in the center of the road. RESULTS : In the case of bus, on the other hand, the average travel speed increased but the average delay time and travel time decreased. This is because the problems such as illegal parking and stopping, secondary road in out vehicle, and conflict of intersection right turn that roadside bus-only lanes occurred was solved. CONCLUSIONS : Although the introduction of median exclusive bus lanes will have a negative effect on general traffic flow due to the aggravation of travel, decrease of passenger car usage will lead to decrease of traffic volume. Therefore, smooth vehicle travel is expected.