• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.463-466
• /
• 2007

In this study, 3D building reconstruction and road design were performed using LiDAR data, digital map and airborne digital image. Information for tourism was extracted from digital maps (scale: 1/5,000) of Jeju Island, and then route of the road was determined for road design. Reconstructed buildings, aerial image and designed road were overlayed with tourism information for 3D simulation. In addition, landscape analysis was performed and result of the road design was visualized.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1324-1326
• /
• 2002

This paper concerns the development of distributed interactive simulation of a road traffic system. The simulation involved models of multiple and distributed road vehicles running on different locations. The simulation system represented a traffic system as if the distributed simulation models were in the same environment. The development of the distributed road traffic simulation was based on High Level Architecture (HLA), a state-of-the-art IEEE standard for the distributed and real-time simulation. Other work concerned modeling and simulating the road vehicles and building the map database for the virtual distributed shared environment. The information used in the simulation system was only in X-axis and Y-axis as the insignificant data in the Z-axis was omitted to simplify the simulation. However, the traffic system has visualized a 3-D coordinate system. The road vehicle models were able to avoid collision. The next direction of a vehicle can be chosen from the provided choices of further paths.

• 한국측량학회지
• /
• 제20권3호
• /
• pp.235-242
• /
• 2002

고해상도의 IKONOS 위성 영상데이터로부터 도로 정보를 판독.추출하고 그 정확도를 분석하고자 하였다. RFM을 이용하여 기하보정영상을 생성한 후, 이 영상으로부터 도로를 판독하고 스크린디지타이징 하였다. 도로 판독 및 추출 정확도를 평가하기 위하여 도로 경계선의 위치와 도로 폭을 수치지도와 비교한 결과, 도로 경계선은 $\pm$3.4m, 도로의 폭은 $\pm$1.1m의 정확도로 추출되었다.

• 한국측량학회지
• /
• 제25권2호
• /
• pp.99-105
• /
• 2007

본 연구는 항공사진을 이용 3차원 도로설계 시뮬레이션을 적용하는데 그 목적이 있다. 기존의 수치지도를 이용한 도로설계 방법대신 수치지도에서 정확히 나타나지 않는 지형과 지물을 수치항공사진을 이용하여 3차원 도로설계에 적용하였다. 먼저 항공사진을 이용해서 정사사진을 만들고 DEM을 추출하여 수치표고모델을 생성하였다. 그리고 실제 평면 설계에 쓰이는 좌표값을 3차원설계에 적용함으로서, 도로 노선 및 경관분석에 많은 도움이 될 것으로 보인다. 또한 Virtual GIS를 이용하므로 도시계획, 식물, 토양, 수로 또는 도로형태, 홍수계획 등 많은 인자들이 평가에 사용되며 이러한 노선설계기준에 따라서 3차원 시뮬레이션을 적용하여 그 효과를 검토하고자 한다. 본 논문에서는 구조물 3차원 설계에 관한 기초적인 연구를 시행하였으며, 3차원설계를 통해 의사결정시 효율적인 판단을 할 수 있었다. 향후, 환경 친화적 시공 및 설계에 대한 연구가 이루어져야 될 것으로 판단된다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.391-396
• /
• 2003

The digital map expresses natural topography and artificial things with 3D position coordinates in the computer such as the road, railway, building, river, mountain, paddy and dryland. Therefore, those should contribute to the information-oriented society by maintaining information and providing it to users quickly. However it is difficult to maintain the most recent topographic information all the time because of restricted budget and time. The purpose of this study is to investigate and analyze the updating area of the digital map using remotely sensed data, and to furnish the useful information reducing cost and time. To predict updating area of the digital map, we applied the urban changes analysis method to Landsat TM images from produced date of the digital map to up-to-date. Classification method for urban change analysis applied single band process algorithm. This study presents that updating area of the digital map is predicted by only the rate of 40% on total research area.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.63-68
• /
• 2015

PURPOSES : A study on the efforts to minimize the road traffic noise has been underway. An attempt has been made to measure the noise level using a noise map; however, the attempt is limited to certain areas only. In general, a noise barrier is employed to prevent road traffic noise; however, unplanned noise barriers developed without considering the surrounding environment, including excessively high walls, cause problems such as infringement on prospect right. Noise ceiling at daytime in Korea is 68 dB(A), which is relatively higher than in other countries. METHODS: The noise barrier used mainly for road noise reduction was analyzed to estimate the optimal height. Related variables such as road width, the height of the upper part, distance to the building, and angle (for instance, $30^{\circ}$). RESULTS : A formula to calculate the optical height of the noise barrier, considering the road environment (i.e., parameters such as road width and distance to building), was developed in this study in an attempt to mitigate the noise generated from the road. CONCLUSIONS : The formula to calculate the noise barrier is expected to lead to cost saving, accurate installation of barriers, and protection of the right of prospect.

• 환경영향평가
• /
• 제23권2호
• /
• pp.112-118
• /
• 2014

The application of a 3-d noise prediction model is increasing as a tool for performing actual noise assessment in order to investigate the noise impact of the residential facility around a development region. However, because the appropriate plans of applying a 3-d noise prediction model is insufficient, it is important to secure the reliability of the noise prediction results generated by a 3-d noise prediction model. Therefore, this study is focused on examining a 3-d noise prediction model, and a prediction equation and input data in it. For this, the 3-d noise prediction models such as SoundPLAN, Cadna-A, IMMI is applied in road noise. After the contents of road noise equations, input data of road noise source, and input data of road noise barrier are understood, the road noise prediction results are compared and examined according to the variation of 3-d noise prediction model, road noise equation, and input data of road noise source and road noise barrier.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.234-237
• /
• 2007

Road networks are important geospatial databases for various GIS (Geographic Information System) applications. Road digital maps may contain geometric spatial errors due to human and scanning errors, but manually updating roads information is time consuming. In this paper, we developed a new road features updating methodology using from multispectral high-resolution satellite image and pre-existing vector map. The approach is based on initial seed point generation using line segment matching and a modified double snake algorithm. Firstly, we conducted line segment matching between the road vector data and the edges of image obtained by Canny operator. Then, the translated road data was used to initialize the seed points of the double snake model in order to refine the updating of road features. The double snake algorithm is composed of two open snake models which are evolving jointly to keep a parallel between them. In the proposed algorithm, a new energy term was added which behaved as a constraint. It forced the snake nodes not to be out of potential road pixels in multispectral image. The experiment was accomplished using a QuickBird pan-sharpened multispectral image and 1:5,000 digital road maps of Daejeon. We showed the feasibility of the approach by presenting results in this urban area.

• 대한공간정보학회지
• /
• 제20권3호
• /
• pp.101-108
• /
• 2012

수치지도는 국가에서 시행하고 있는 도로명주소를 포함 하지 못하고 있으며, 타 기관에서 직접 활용하기에는 문제점이 있어 연계 구축이 필요하나, 기 구축된 수치지도와 도로명 주소의 양이 방대하여 매칭을 수작업으로 진행할 경우 많은 예산 및 시간이 필요한 실정이다. 본 연구는 공간매칭을 이용하여 수치지도와 도로명주소의 자료 연계를 통하여 속성정보를 생성 하는 시스템을 개발하고, 이에 대한 매칭률을 분석하고자 한다. 대상지역에 대한 매칭율을 분석한 결과 수원시는 1:1000수치지도에서 건물이 84%, 도로가 67%로 좋은 매칭율을 나타냈고, 서귀포시는 건물 18%, 도로 21%로 나타났다.

• 한국소음진동공학회논문집
• /
• 제22권2호
• /
• pp.156-162
• /
• 2012

This paper presents differences of road traffic noise maps were generated by using the draft map and two digital maps with different versions. As a first step, the calculation of the areas of excessive noise exposure was made for the draft map and each digital map version. Subsequently, the areas of excessive noise exposure were compared so as to determine how different from each other. Then, comparison of the populations exposed to excessive noise was also conducted in the same way. It was found that the most accurate noise map was obtained when using the combination of the draft map containing all attribute information and the digital map Ver 2.0. This result indicates that more information on the height and the number of floors of the individual building is required in order to obtain more accurate population exposed to excessive noise, thus creating a more accurate noise map.