• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.159-164
• /
• 1995

Driving maneuver in car following are affected by not only the factors related to road structure and traffic condition, but also the factors related to driver's cognition to them. So the aim of this research this to model the relation of driver's cognition for car-following distance considering driver's fuzziness for imformation cognition, As a result, driver's cognition of car-following distance model with fuzzy number is proposed. The 'width', which characterizes the fuzzy number can introduce car-following informtion into the model.

• 한국지열·수열에너지학회논문집
• /
• 제19권3호
• /
• pp.1-13
• /
• 2023

Hydronic heated road pavement (HHP) systems have been well established and documented to provide road safety in winter season over the past two decades. However, most of the systems run on asphalt, only a few are tested with concrete, and there rarely is a comparison between those two common road materials in their performance. The aim of this study is to investigate the thermal performance of the concrete HHP systems, including surface temperature variations of experimental pavements in winter season. For preliminary study a small-scale experimental system was installed to evaluate the heat transfer characteristics of the concrete HHP in the test field. The system consists of 3 concrete slabs made of 1 m in width, 1 m in length, and 0.25 m in height. In these slabs, circulating water piping was embedded with different pipe depths of 0.08 m (Case A), 0.12 m (Case B), and 0.20 m (Case C) and same horizontal space of 0.16 m. Heating performance in winter season was tested with different inlet temperatures of 25℃, 30℃, 35℃ and 40℃ during the entire measurement period. Overall, the surface temperature of the concrete HHPs remained above 3℃ in all experimental conditions applied in this study. The results of the surface temperature measurement with respect to the pipe depth showed that Case B was the highest among the three cases. However, the closer the circulating water pipe was to the pavement surface, the greater the heat exchange rate. This results is considered that the heat is continuously accumulated inside the pavements and then the temperature inside the pavements increases, while the amount of heat dissipation decreases as the temperature difference between the inlet and outlet of circulating water decreases. In this preliminary test the applicability of the concrete HHP on road deicing was confirmed. Finally, the results can be used as a basis for studying the effects of various variables on road pavements through numerical analysis and for conducting large-scale empirical experiments.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.95-104
• /
• 2014

PURPOSES : The purpose of this study is to evaluate the degree of restraint (DOR) of longitudinal steel at continuously reinforced concrete pavement (CRCP) against environmental loadings. METHODS : To measure the longitudinal steel strain, 3-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10 min. intervals during 259 days. In order to properly analyze the steel strains first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into 12 phases with different events such as before paving, during concrete hardening, and after first cracking, etc. RESULTS : Thermal strain rate (TSR) concept is defined as the linear strain variations with temperature changes and restraints rate of longitudinal steel against environmental loadings (especially thermal loading) with different cases is defined as degree of restraint(DOR). New concept of DOR could be indirect indicator of crack width behaviors of CRCP. CONCLUSIONS : Before paving, DOR of longitudinal steel is almost same at the coefficient of thermal expansion of steel ($12.44m/m/^{\circ}C$) because of no restraint boundary condition. After concrete pouring, DOR is gradually changed into -1 due to concrete stiffness developing with hydration. After first cracking at crack induced area, values of DOR are around -3~-5. The negative DOR stands for the crack width behavior instead of steel strain behavior. During winter season, DOR reached to -5.77 as the highest, but spring this values gradually reduced as -1.7 as the lowest. Based on this observation, we can presume crack width decreased over time within the time frame of this study. This finding is not consistent with the current theory on crack width variations over time, so further study is necessary to identify the causes of crack width reducing. One of the reasons could be related to concrete stress re-distribution and stress relaxation.

• 한국수자원학회논문집
• /
• 제36권3호
• /
• pp.465-480
• /
• 2003

본 연구에서는 도로의 측구 부분을 수리모형으로 제작하여 빗물받이의 차집능력을 검토하였다. 측구의 유량은 도로의 차선(2-4차선) 및 빗물받이 간격(10-30m)을 고려하여 4-15l/sec의 유량을 사용하였고, 도로의 종방향 경사는 0, 2, 5, 7%를 선택하였으며, 측구의 횡경사는 4, 7, 10%를 사용하였다. 유입부의 규모는 $30\times40cm,\;40\times50cm,\;40\times100cm,\;40\times150cm$의 4종류를 사용하였으며, 총 실험 횟수는 240회이다. 측구의 횡경사가 클수록 전체적인 빗물받이의 차집유량은 증가하였다. 차집효율은 흐름폭과 유량이 작을 수록 증가하였고, 종방향 경사가 급할 수록 감소함을 알 수 있었다. 실험의 결과로부터 유입부 규모에 따른 차집유량을 계산할 수 있는 경험식을 제시하였다. 도로의 차선별, 종경사별, 측구의 횡경사별, 유입부 규모별로 적정 빗물받이 간격을 제시할 수 있어서 도로의 빗물받이 설계에 기초자료를 제공하였다.

• 한국터널지하공간학회 논문집
• /
• 제15권5호
• /
• pp.497-504
• /
• 2013

본 연구에서는 도로터널 조명설계에 있어서 내부조명의 밝기 수준에 영향을 미치는 갱구부 경관을 L20법 측정을 통하여 수치 해석적으로 고찰하였다. 갱문 형식별로 휘도인자를 추출하고 갱구부 주변시설물의 재료적 특성이 미치는 영향을 평가하기 위해서 동영상 휘도계 HI-LAND ELF SYSTEM과 면휘도계 LMK Mobile advanced로 촬영하여 휘도 분석을 하였다. 국내의 터널은 대부분 산악지대에 분포되어 L20각도 내에서 휘도가 가장 높은 하늘이 점하는 비율이 거의 없으며, 터널 입구주변이나 도로노면에 의한 휘도가 대부분을 차지하고 있다. 그러나, L20각도 내에서 갱문의 면적이 넓게 보이는 면벽식의 경우는 주변이나 노면에 비해 밝은 휘도를 나타냄으로서 터널내 경계부 휘도를 높이는 요인이 되고 있으며, 터널 갱구주변의 도로시설물도 휘도에 영향을 미치고 있음을 파악하였다. 따라서, 휘도기반의 터널조명 설계 시 갱문의 형식 및 갱구부 주변시설물에 대한 면적, 재료, 색상 등이 외부휘도에 영향을 미치고 이로 인해 터널 내부조명의 밝기 레벨 설정에 영향을 주는 요인이 되므로 갱구부 경관설계 시 이에 대한 검토가 반드시 필요한 것으로 나타났다.

• 한국ITS학회 논문지
• /
• 제12권6호
• /
• pp.97-107
• /
• 2013

단횡단보도는 보행자가 도로를 두 번에 나누어 횡단하게 하는 횡단보도로 이는 보행대기 시간을 단축할 수 있고 주방향 녹색시간 비율을 증가시켜 신호주기감소 및 차량지체 감소에 효과적이다. 또한 보행자의 횡단거리 감소와 교통섬을 제공하는 기능으로 보행자의 안전 측면에서도 유용하다. 본 연구에서는 도로 기하구조와 보행자의 행동패턴들을 고려한 보행섬의 폭과 길이 등 단일로 상의 이단횡단보도의 설치 준거를 마련하고, 이단횡단보도와 기본형 횡단보도의 사고율을 비교 분석하여 보행자 교통안전 대책을 제시하였다. 본 연구결과, 이단횡단보도의 1억대 km당 사고율은 18.3으로 기본횡단보도 사고율 28.3에 비해 상대적으로 낮은 것으로 분석되었으며 사고발생위치 및 유형분석을 통해 이단횡단보도의 위험지역이 횡단 시작 지점임을 파악하여 이를 바탕으로 보행자 안전지대(여유공간)설치 준거를 제시하였다. 결론적으로 이단횡단보도의 설치준거는 4차로이상 도로에 설치하며 설치시 보행섬의 폭은 유효 보도폭 2.0m 이상이 되도록 차로폭을 조정하는 것이 필요하다. 또한 보행섬의 최소길이는 횡단 보도폭의 2배 길이, 최대길이는 보행자 대기 시간을 고려하여 설치하는 것이 보행자 안전과 이용측면에서 적절할 것으로 사료된다.

• 대한토목학회논문집
• /
• 제30권2D호
• /
• pp.153-161
• /
• 2010

지방정부의 도시계획은 지속적인 프로세스로 계획의 수립과 함께 끝나는 것이 아니고 의사결정, 검토와 평가단계를 거쳐서 지속적으로 바뀌는 것이다. 도시계획이 바뀌고 확정됨에 따라서 대규모의 도로를 기존에 수행되고 있던 도로와 연계하여 공사를 수행하게 되는 경우도 발생하게 된다. 이러한 경우에 기시공된 도로의 폭과 길의 확장, 추가적인 교량 및 터널의 건설, 그리고 인터체인지의 크기와 위치의 변경 등과 같은 요인들에 의하여 도로설계 및 시공에 많은 변화를 가져오게 된다. 과거에는 제한된 수와 제한된 공종에 한하여 도로 수탁공사가 수행되어 왔으나, 현재는 수행되는 수탁공사의 수도 증가하고 있으며, 대규모 복합공종을 위한 수탁공사가 이루어지고 있다. 그러나 수탁공사 수행을 위한 절차나 수탁공사 계약을 위한 가이드라인이 마련되어 있지 않다. 따라서 효과적인 도로 수탁공사를 수행하는데 어려움이 있다. 본 논문에서는 공사관련 서류들과 전문들의 면담을 통하여 수탁공사 수행을 위한 중요 고려요소를 파악하였고, 이 결과에 근거하여 수탁공사의 표준절차(안)과 수탁공사비 협의를 위한 가이드라인을 제시하였다. 또한 위탁기관이 부담해야 하는 비용에 관한 내용을 제시하였다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.153-160
• /
• 2016

OBJECTIVES : The objective of this study is to develop a traffic accident model of a roundabout based on the type of land use. METHODS : The traffic accident data from 2010 to 2014 were collected from the "traffic accident analysis system (TAAS)" data set of the Road Traffic Authority. A multiple linear regression model was utilized in this study to analyze the accidents based on the type of land use. Variables such as geometry and traffic volume were used to develop the accident models based on the type of land use. RESULTS : The main results are as follows. First, the null hypothesis that the type of land use does not affect the number of accidents is rejected. Second, four accident models based on the type of land use have been developed, which are statistically significant (high $R^2$ values). Finally, the total entering and circulating volumes, area of the central island, number of speed breakers, mean number of entry lanes, diameter of the inscribed circle, mean width of the entry lane, area of the roundabout, bus stops, and number of circulatory roadways are analyzed to see how they affect the accident for each type of land use. CONCLUSIONS : The development of the accident models based on the type of land use has revealed that the accident factors at a roundabout are different for each case. Thus, more speed breakers in commercial areas and an inscribed circle of proper diameter in commercial and residential areas are determined to be important for reducing the number of accidents. Additionally, expanding the width of the entry lanes, decreasing the area of the roundabouts in residential areas, and reducing the conflict factors such as bus stops in green spaces are determined to be important.

• 한국도로학회논문집
• /
• 제20권2호
• /
• pp.75-85
• /
• 2018

PURPOSES : This study aimed to analyze traffic accidents at circular intersections, and discuss accident reduction strategies based on land use and vehicle type. METHODS : Traffic accident data from 2010 to 2014 were collected from the "traffic accident analysis system" (TAAS) data set of the Road Traffic Authority. To develop the accident rate model, a multiple linear regression model was used. Explanatory variables such as geometry and traffic volume were used to develop the models. RESULTS : The main results of the study are as follows. First, it was found that the null hypotheses that land use and vehicle type do not affect the accident rate should be rejected. Second, 16 accident rate models, which are statistically significant (with high $R^2$ values), were developed. Finally, the area of the central island, number of speed humps, entry lane width, circulatory roadway width, bus stops, and pedestrian crossings were analyzed to determine their effect on accidents according to the type of land use and vehicle. CONCLUSIONS : Through the developed accident rate models, it was revealed that the accident factors at circular intersections changed depending on land use and vehicle type. Thus, selecting the appropriate location of bus stops for trucks, widening entry lanes for cars, and installing splitter islands and optimal lighting for motorcycles were determined to be important for reducing the accident rate. Additionally, the evaluation showed that commercial and mixed land use had a weaker effect on accidents than residential land use.

• 한국환경과학회지
• /
• 제24권11호
• /
• pp.1431-1442
• /
• 2015

This study was carried out to systematically maintain and manage the trails by assessing the physical characteristics, the types of deterioration and impact rating class of trails located in Mt. Nam District of the Gyeongju National Park. The major trails followed 6 routes including Sambulsa-Geumobong(A), Yongjangsaji-Geumobong(B), Yongjanggol-Yiyoungjae-Gowibong(C), Cheonusa-Gowibong(D), Sangseojang-Forest road(E) and Tongiljeon-Forest road(F). The routes length of A was 2.2 km, 2.7 km of B, 3.4 km of C, 1.3 km of D, 2.0 km of E and 1.0 km of F. In the physical characteristics, A was the widest and F was the narrowest in the width and bared width of trail. In depth of erosion, B was the deepest and E was the shallowest. D was the steepest and E was the gentlest in the slope. In the results of analysing the types of deterioration, A were 13 types, 11 types of B, C and D, 10 types of E and 6 types of F. The times of appearance of deterioration types in A were 86 times, 75 times of B, 105 times of C, 48 times of D, 47 times of E and 13 times of F. In case of the impact rating class, trail erosion was II degree, I degree of trail expansion, root exposure, trail divergence and rock exposure.