• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.313-321
• /
• 2017

Traffic accidents in the country have steadily increased. Although IOT technologies have been applied so as to prevent the primary accident, practical solutions to prevent the secondary accident have not been suggested. A general guideline is simply recommended. In this paper, utilizing existing communication technology, we implement a proposed model and its simulation to prevent the secondary accident. When it is possible for a driver to secure visibility, the secondary accident can be prevented; In areas like tunnel, mountain terrain, and curve road with heavy traffic, where the driver has difficulty in securing the visibility, the secondary accident rates after the primary accident have been increasing. Therefore, we implement an accident prevention system that determines the primary accident utilizing sensor technology and prevents the secondary accident communicating through V2V or V2I. After the simulation, we found that the proposed model and the existing model made no difference with regard to the secondary accident rates when the visibility of the driver is secured; With the application of the proposed model, however, the accident rates decreased for 3-7 percent even though the visibility and communication were not secured.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.136-143
• /
• 2015

Snow-melting system has been applied not only to roads for car traffic but also to pavement for the pedestrians safety reason in some of the developed countries such as USA and Canada based on countermeasures against Natural Disasters Act revised in 2000. Even though this system was introduced in korea in 2006 and has been partly applied to car traffic roads, there is few places that the system has been applied. Therefore, in this research a snow-melting system with a block-type to cover a pavement that efficiently transfers heat form heat rays to the top of a pavement and protects the heat rays. A quality check showed that compression and bending strength was improved approximately 5 times stronger and 7 to 10 times more absorption rate than the KS(Korea Industrial Standard) requirement. Moreover, only 10 minute was required to increase temperature above zero with a block-type snow-melting system whereas approximately 180 minute was spent with the existing system. This research is expected to contribute to environmental issues and reduce accidents on a slippery road.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.58-76
• /
• 2019

As the number of reported injuries has tended to increase over time, large hospitalization expenditure from excessive medical treatments and hospitalization, and insurance frauds associated with moral hazard in minor collisions have caused a global societal problem. Many occupants of rear-ended vehicles involved in rear-end collisions complain of whiplash injury, which is also known as neck injury, without any anatomical and radiological evidence. With only clinical symptoms, stating that a whiplash injury is a type of injury defined by the Abbreviated Injury Scale would be difficult. Therefore, this study focuses on minor rear-end collisions, where the rear-ender vehicle collides with the rear-ended vehicle at rest. The mathematics dynamic model is employed to simulate a total of 100 rear-end collision scenarios based on various weights and collision speeds and identify how the weights and speeds of both vehicles influence the risk of whiplash injury in occupants involved in minor rear-end collisions. The possibility of an injury is very high when the same-weight vehicles are involved in accidents at collision speeds of 15 km/h or higher. The possibilities are 36% and 84% with collision speeds of 15 km/h and 20 km/h, respectively, if weights are disregarded.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.164-181
• /
• 2023

In a low speed limit environment, the speed limit tolerance of automated traffic enforcement devices is very high, which is one of the main factors for the low compliance rate. Therefore, in this study, we aimed to the improve the speed limit tolerance and to present a new standard. The effects of the operator and user errors that can cause speeding by drivers were analyzed. Based on the results of the analysis, an improvement of the tolerance was proposed by applying an error in the enforcement device and GPS speed. In addition, long-term expected safety effects such as the accident rate and severity were estimated from the operator's perspective when improving the tolerance. As a result of the estimation, the speed limit compliance rate, accident rate, and change rate of a number of severe accidents due to speed change, and pedestrian traffic accident mortality rate were all improved in all speed limit environments. The introduction of the proposed improvement is expected to improve road safety significantly.

• Science of Emotion and Sensibility
• /
• v.26 no.2
• /
• pp.129-140
• /
• 2023

Following ISO 20471, in this study, first, two sets of safety clothes and safety vests were made by designing and attaching animal and bird patterns preferred by children to retroreflective films and black fabrics on those fluorescent fabrics and retroreflective materials prescribed by international standards. Second, by mounting a smart photonic device on the safety clothing so that the body can be recognized from a distance even without an ambient light source at night, children can emit three types of light depending on the situation with just one-touch of the button. From a result of comparison with visibility a day and night by dressing a mannequin in the made smart safety clothing, the difference in visibility was evident at night, it was confirmed that we can see the figure of a person even at a distance of approximately 70 m. Therefore, it is expected to contribute to the prevention of traffic and other accidents on the road, as the drivers driving at night or in bad weather can recognize a person from a distance. Third, in case of the energy is exhausted and cannot maintain the stability of the light-emitting function of the optical faber, we can use energy harvesting device, and the light-emitting time will be extended. As a result it comes up to emit light stably for a long time. And this prove that smart photonic safety clothing can also be used for night workers. Therefore, optical fiber safety clothing is expected to be highly wearable not only in real life but also in dark industrial sites due to stable charging by applying the energy harvesting provided by solar cells.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.815-825
• /
• 2017

Visibility of lane marking is impaired at night or in the rain, which thereby threatens traffic safety. Recently, various studies and technologies have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment productivity, improvement of lane marking visibility by applying phosphorescent material mixed paint. Cost-benefit analysis was performed with considering various benefit items that can be expected. About 45% of traffic accidents would be prevented by improving lane marking visibility. Additionally, accident reduction benefit and traffic congestion reduction benefit were calculated as much as 246 billion KRW per year and 12 billion KRW per year, respectively, by reducing repaint cycle due to enhanced durability. 45 billion KRW per year is expected to reduced with improved lane detection performance of autonomous vehicle. Meanwhile, total increased cost when introducing phosphorescent material mixed paint to 91,195km of nationwide road is identified as 1922 billion KRW per year. However, economic feasibility could not be secured with 0.16 of cost-benefit ratio when applied to the road network as a whole. In case of "Accident Hot Spot" analyzing section window (400m), one or more fatality or two or more injured (one or more injured in case of less than 2 lanes per direction) per year were caused by pavement marking related accident, economic feasibility was secured. In detail, 3.91 of cost-benefit ratio is estimated with comparison of the installation cost for 5,697 of accident hot spot and accident reduction benefit. Some limitations and future research agenda have also been discussed.

• Journal of Korea Port Economic Association
• /
• v.33 no.3
• /
• pp.17-34
• /
• 2017

This study aims to analyze the freight transport demand and benefit for the introduction of an automated freight transport system focusing on the Global Industry and Logistics City (GILC) in Busan. In pursuit of this aim, four alternatives were calculated - using the freight volume estimating methods and included, the number of businesses, the number of employees set up, future estimated cargo volume, and switched volume from other transport modes into the GILC. Economic benefits were analyzed against social benefits and costs accordingly. The result of the freight transport demand forecast found, the cargo volume of "Alternative 2-1" to be the most advantageous, applying the number of employee unit method and proportion of employees in Gangseo-gu, Busan. In addition to the conventional analysis of direct benefit items (reduction of transport time, traffic accidents and environmental costs), this study also considered additional benefit items (congestion costs savings, and road maintenance costs in terms of opportunity cost). It also considered advanced value for money research in guidance on rail appraisal of U.K, Federal Transport Infrastructure Plan 2003 of Germany, and RailDec of the United States. The study aims to further contribute to estimating minimum cargo transport demands and assess the economic feasibility of the introduction of new intermodal automated freight transport systems in the future.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.1
• /
• pp.151-200
• /
• 2018

At the Davos Forum in 2016, the Fourth Industrial Revolution, a reference to cloud Schwab, is dramatically changing our lives, and at its height, self-driving cars are emerging as the talk of the day. But there are still many hurdles to overcome before the nation can successfully introduce and establish self-driving cars. In particular, it is necessary to change the paradigm of the legal system centered on human beings to one that includes artificial intelligence. The stable operation of the self-driving car era requires drastic changes to the people-centric legislation system. That is, it is necessary to collect information on the total number of drivers of self-driving cars (what is available), general vehicles on general roads, civil and criminal liability issues in the event of traffic accidents, and collection of insurance problems concerning autonomous driving vehicles. In this study, a separate bill was proposed to address the various legal issues arising from the operation of self-driving cars from a legislative perspective by considering the domestic laws related to road transport, the current state of legislation on foreign soil and legal issues related to self-driving cars.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.939-944
• /
• 2014

Traffic accidents caused by the attention dispersion are increasing and the behavior of the attention dispersion affects the front-observing rate, road keeping ability, and reaction time for a dangerous situation. Many drivers listen to a radio broadcast and they have to change the frequency for continuously listening a radio broadcast of the specific broadcasting station in case of crossing a boundary of the particular area. In this situation, the possibility of a car accident increases, because the attention dispersion of a driver might be occurred. Especially, the risk of a car accident caused by changing the frequency of a radio is more serious in the highway, due to the high speed of a vehicle. In order to reduce the risk of a car accident caused by handling a radio during driving car, in this paper, we propose an automatic frequency conversion algorithm for vehicle radio, which saves normal system frequencies of primary broadcasting stations in a database and determines new frequency of the changed area using the location information obtained from a navigation system in a boundary of the specific area. After determining new frequency, the proposed algorithm selects a frequency with better receiving rate comparing signal-to-noise ratios (SNRs) of two signals corresponding previous and new frequencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7329-7334
• /
• 2015

This is to analyze of driver behavioral and the accident characteristics in rollover. The study period was January 2011 to May 2014 and the subject of study was 102 person who were drivers visited the emergency room. Research tool includes a damage information of the vehicle, accident mechanism, damage to the patient clinical information with the injury data from the ROAD Traffic Authority. For data analysis, SPSS 18.0 was used for t-test, ANOVA and Chi-square test. Injury Severity Score average score according to the vehicle type is 6.00 points in the smaller vehicle, at high vehicle 11.78 points, from the other vehicle that showed 14.70 points. Significant differences between the three groups did not show (P=.267). Men did not use a seat belt significantly compared to women(P=.007). Vehicle type and weather, this was no correlation with whether or not use the seat belt(P=.755, P=.793). But showed a tendency to smaller size vehicles drivers do not use a seat belt, the weather could see a little more inclined to use a seat belt rather than a sunny day. Finally, in rollover accidents as in other types of accident it was confirmed that the seat belt has a great influence on the damage.