• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2107-2113
• /
• 2015

This paper proposed a Prior Forecast System of Crossroad Traffic Information that allows vulnerable road users to perceive traffic signal changes beforehand and respond in concentrated traffic areas such as crossroads. Also, it mapped out information linking procedures of the proposed system and it designed a PHY based wireless communication simulator to verify the operational feasibility of wireless communications. Conclusively, by conducting performance analysis according to crossroad channel environments using the simulator designed in this paper, it verified that a Prior Forecast System of Crossroads Traffic Information service for vehicle IT based decision-making support for vulnerable road users is a possibility.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.3
• /
• pp.35-40
• /
• 2022

In this study, the driving performances of elderly who's age is over 65 were evaluated. The driving simulation was conducted using a compact driving simulation (CDS) and the simulation scenarios were developed from actual roads by replicating geometry of skewed intersection and traffic control devices located in Jungnang-gu, Seoul, Korea. 27 elderly drivers and 10 non-elderly drivers were recruited and participated on the virtual turning right and going straight driving experiment of CDS. Virtual driving data of driving time, speed, distance, acceleration and deceleration speeds, brake power, and steering wheel rotation angle were recorded and analyzed. Generally, elderly driver took more times to pass through the skewed intersection road and showed lower approaching speed as much as 40% and 25% in case of turning right and going straight scenarios respectively. The speed deviation at skewed intersection road between elderly and non-elderly driver is expected to cause frequent lane changes and overtaking.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.435-441
• /
• 2014

The V2X cooperative communication system is fusion technology which makes vehicle manuver safer. To evaluate and anticipate effect of these kind of technology, it requires real-car based road construction, implementation of communication devices, hiring inspection specialized personnel. For this reason, many laboratories and universities experience difficulties to test their technology results. Also, the need of implementing reliable testbed for testing vehicle safety applications and V2X communication technology is increasing as V2X device development is being accelerated. In this paper, we implemented a system which synchronizes traffic and network simulators via developing External interface to set simulation based testing environment in order to solve the difficulties.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.391-398
• /
• 1998

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through the road test and the experiment using a engine dynamo, namely, the trial and error process. This approach require very high cost and long time consuming to develop the system. In this study, the simulator which had a speaker in the cylinder head was presented. It was easy to analyze the acoustic characteristic of the intake system in laboratory environment. This study presented a improvement to reduce the level of the intake noise using the Transfer Matrix Method and NIT/SYSNOISE, FE analysis commercial software. It was to select optimum position of a resonator and verified by the simulator. This simulator can be used early in the design stage of development of the intake system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.117-132
• /
• 2021

Due to the terrain in Korea, there are many road sections passing through mountainous areas. During the winter, there is a higher risk of traffic accidents, due to black ice caused by the lack of sunlight. Despite domestic road freezing safety measures, accidents caused by road freezing results in severe traffic accidents. Under these considerations, this study analyzed whether traffic safety signs that change in response to the external temperature help drivers recognize frozen road segments. The study was conducted through analysis of the effect of the signs on a driver's perspective. For the signs under development, out of the signs designed by experts, the sign design which received the highest visibility and effectiveness evaluation ratings from the general public was selected. The sign was implemented through Virtual Reality (VR) and installed on the right side of the road to analyze the effect on gazing and driving behavior. As a result of analyzing the driver's driving behavior, a speed reduction of about 7km/h or more was found in the sign section. Therefore, It was found that the existence of the sign had a strong relationship with the rate of the drivers' speed reduction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.116-127
• /
• 2017

A fog on road is known as a weather factor that affects traffic flow. The method in order to solve the problem, recently, Variable Speed Limit(VSL) which provide reasonable speed limit by road and weather conditions in real time is introduced. However, if drivers do not comply with VSL, the road safety more decrease than without VSL because individual vehicle's speed deviation is larger than without VSL. Therefore, this paper aims to analyze to speed limit compliance and traffic characteristics under foggy conditions with and without VSL. A test using driving simulator divides into normal and foggy condition with visibilities are 200m, 150, 50~100m. The test results showed that 70 subjects's average speed mostly obeyed speed limit, but speed deviation generally declined with VSL. Especially, the speed deviation more reduced under foggy conditions. According to this study, compliance of VSL clearly rose in low visibility and VSL helped improve road safety due to reduction of speed deviation. The results of this study are expected to make use of reasonable speed limit for reference.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.127-134
• /
• 2013

PURPOSES: Speeding is often the primary contributor to fatal crashes. Surprisingly, driving behaviors are indirectly affected by personal factors such as law-abidance, risk sensitivity, and situational adaptability. This research aims to verify the effectiveness of pavement markings at reducing the speeds of high-risk drivers. The purpose of this study is to establish how drivers (including law-abiding or law-breaking, high-risk or low-risk) react to different pavement markings in a driving simulator. METHODS: The five different pavement markings were selected from markings used in other nations. The forty-two drivers were then surveyed, via questionnaires, and placed into the corresponding groups. Finally, statistical analysis was conducted to determine the extent of speed reduction for each pavement marking. RESULTS: Higher speeds were linked to the high-risk drivers. Furthermore, after analysis of the mean difference of average speeds by pavement marking, it was determined that Dragon's Teeth had the greatest speed reducing effect on these drivers. CONCLUSIONS: Perceptual countermeasures are unlikely to strongly affect high-risk drivers' perception of speed on the curves. This statistically demonstrates that Dragon's Teeth have a subtle effect on reducing speeds in the driving simulator. This study's significance lies in the improved understanding of high-risk drivers in terms of road facilities. It approaches the effects of various patterns of pavement markings for high-risk drivers.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.5
• /
• pp.637-646
• /
• 2012

Objective: The aim of this study was to develop the adaptive device for severe physical disabilities using smart device in the driving simulator and its performance evaluation. Development of appropriate driving adaptive device for the people with serious physical limitation could contribute to maintain their community mobility. Background: There is lack of adaptive driving devices for the people with disabilities in Korea. However, if smart device systems like iPod and iPhone are used for driving a car, the people with serious physical limitations can improve their community mobility. Method: Both gyroscope and accelerometer from iPod were used to measure the tilted angle of the smart device for driving. Customized Labview program was also used to control three axis motors for steering wheel, accelerator and brake pedals. Thirteen subjects were involved in the experiment for performance evaluation of smart device in simulator. Five subjects had driver licenses. Another four subjects did not have driver licenses. Others were people with disabilities. Results: Average driving score of the normal group with driver license in the simulator increased 46.6% compared with the normal group without driver license and increased 30.4% compared with the disabled group(p<0.01). There was no significant difference in the average driving score between normal group without driver license and disabled group(p>0.05). Conclusion: The normal group with driver license showed significantly higher driving score than other groups. The normal group without driver license and disabled group could improve their driving skills with training in simulator. Application: If follow-up studies would be continued and applied in adapted vehicle for on road environment, many people with more severe disabilities could drive and improve the quality of life.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.525-530
• /
• 2016

In this paper, we proposed an image shaking index to evaluate the remote controllability of vision based unmanned vehicles. To analyze the usefulness of the proposed image-shaking index, we perform subjective tests using a virtual unmanned vehicle driving simulator. The developed driving simulator consists of a real-time multibody dynamic software of the unmanned vehicle, a motion simulator, and a driver console. We perform dynamic simulations to obtain the motion of the unmanned vehicle running on the various road surfaces such as ISO roughness level A~E roads. The motion of the vehicle body is reflected in the motion simulator. Then, to enable remote control operation, we offer to operators the image data that was measured using the camera sensor on the simulator. We verify the usefulness of the proposed image-shaking index compared with subjective index provided by operators.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.9-16
• /
• 2022

The nodes constituting the vehicle ad hoc network (VANET) are vehicles moving along the road and road side units (RSUs) installed around the road. The vehicle ad hoc network is used to collect the status, speed, and location information of vehicles driving on the road, and to communicate with vehicles, vehicles, and RSUs. Today, as the number of vehicles continues to increase, urban roads are suffering from traffic jams, which cause various problems such as time, fuel, and the environment. In this paper, we propose a method to solve traffic congestion problems on urban roads and demonstrate that the method can be applied to solve traffic congestion problems through performance evaluation using two typical protocols of vehicle ad hoc networks, AODV and GPSR. The performance evaluation used ns-2 simulator, and the average number of traffic jams and the waiting time due to the average traffic congestion were measured. Through this, we demonstrate that the vehicle ad hoc-based traffic congestion management technique proposed in this paper can be applied to urban roads in smart cities.