• 터널과지하공간
• /
• 제28권6호
• /
• pp.620-634
• /
• 2018

고속도로면으로 부터 심도는 약 7.5 m로 얕으나 너비가 약 21 m로 넓은 터널의 안정성을 확보하고 도로면의 침하를 최소화하기 위하여 NTR(New Tubular Roof)공법을 보조공법으로 이용하였다. 이 방법에 따라 터널 굴착예정선 둘레에 직경 2.3 m의 강관 13개를 종방향으로 압입하고 강관측벽을 뚫어 서로 연결한 후 강관내부와 연결공간을 콘크리트로 채워 라이닝을 먼저 만들었고 라이닝 내부 지반을 굴착하여 터널을 완성하였다. 여러 개의 강관을 순차적으로 압입함에 따라 이완영역이 서로 연결되면서 폭이 점차 넓어지는 공동으로 거동하여 침하증분이 커졌고 터널 폭이 가장 넓은 곳에 강관을 압입할 때 도로면 침하증분은 약 2.2 mm로 최대였으며 라이닝 시공 때 까지의 총침하는 약 7.7 mm이었다. 그리고 폭이 넓은 라이닝 내부 터널을 굴착하면서 약 4.3 mm의 침하가 추가로 발생하면서 시공종료 후 총침하는 약 11.8 mm가 되었다.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1431-1438
• /
• 2013

A pack-level battery hardware-in-the-loop simulation (B-HILS) platform is implemented. It consists of dynamic vehicle models using PSAT and multiple control interfaces including real-time 3D driving and GPS mode. In real-time 3D driving mode, user can drive a virtual vehicle using actual drive equipment such as steering wheel and accelerator to generate the cycle profile of the battery. In GPS mode, actual road traffic and terrain effects can be simulated using GPS data while the trajectory is displayed on Google map. In the latter part of the paper, several performance tests of an actual lithium-polymer battery pack are carried out utilizing the developed system. All experiments are conducted as parts of actual development process of a commercial battery pack adopting 2nd generation Prius as a target vehicle model. Through the experiments, the low temperature performance and fuel efficiency of the battery are quantitatively investigated in comparison with the original nickel-metal hydride (NiMH) pack of the Prius.

• 제어로봇시스템학회논문지
• /
• 제20권8호
• /
• pp.828-834
• /
• 2014

This paper presents a comparison among three types of approaches to an ARC (Active Roll Control) with an AARB(Active Anti-Roll Bar) for a vehicle system. Lateral acceleration and road profile are considered as disturbance. The ARC is designed with an LQ SOF (Linear Quadratic Static Output Feedback) control, $H_{\infty}$ control and SMC (Sliding Mode Control). These approaches are compared in terms of rollover prevention and ride comfort. For comparison, Bode plot analysis based on linear model and frequency response analysis based on CarSim simulation are performed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.224-229
• /
• 2004

The objective of this work is not only to perform feasibility studies on the CFD (computational fluid dynamics) analysis for the capillary system design but also to provide an enhanced understanding of the autonomous capillary flow. The capillary flow is evaluated by means of the commercial CFD software of FLUENT, which includes the VOF (volume-of-fluid) model for multiphase flow analysis. The effect of wall adhesion at fluid interfaces in contact with rigid boundaries is considered in terms of static contact angle. Feasibility studies are first performed, including mesh-resolution influence on pressure profile, which has a sudden increase at the liquid/gas interface. Then we perform both 2D and 3D simulations and examine the transient nature of the capillary flow. Analytical solutions are also derived for simple cases and compared with numerical results. Through this work, essential information on the capillary system design is brought out. Our efforts and initial success in numerical description of the microfluidic capillary flows enhance the fundamental understanding of the autonomous capillary flow and will eventually pave the road for full-scale, computer-aided design of microfluidic networks.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.82-88
• /
• 2016

This paper proposes a new type of semi-active direct-drive valve(DDV) car suspension system using piezoelectric actuator associated with displacement amplifier. As a first step, controllable piezoelectric DDV damper is designed and governing equation of a quarter-vehicle suspension system consisting of sprung mass, spring, tire and the piezostack DDV damper is constructed. After deriving the equations of the motion, in order to control spool displacement and damping force the skyhook controller is designed and applied. The performance evaluation of the proposed semi-active suspension system is conducted with different displacement of spool. Then, the ride comfort analysis is undertaken in time domain with bump road profile.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.1-10
• /
• 2015

PURPOSES : A finite difference model considering snow melting process on porous asphalt pavement was derived on the basis of heat transfer and mass transfer theories. The derived model can be applied to predict the region where black-ice develops, as well as to predict temperature profile of pavement systems where a de-icing system is installed. In addition, the model can be used to determined the minimum energy required to melt the ice formed on the pavement. METHODS : The snow on the porous asphalt pavement, whose porosity must be considered in thermal analysis, is divided into several layers such as dry snow layer, saturated snow layer, water+pavement surface, pavement surface, and sublayer. The mass balance and heat balance equations are derived to describe conductive, convective, radiative, and latent transfer of heat and mass in each layer. The finite differential method is used to implement the derived equations, boundary conditions, and the testing method to determine the thermal properties are suggested for each layer. RESULTS: The finite differential equations that describe the icing and deicing on pavements are derived, and we have presented them in our work. The framework to develop a temperature-forecasting model is successfully created. CONCLUSIONS : We conclude by successfully creating framework for the finite difference model based on the heat and mass transfer theories. To complete implementation, laboratory tests required to be performed.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.38-46
• /
• 2012

This paper discusses the energy consumption for a mid-size electric vehicle(EV) under various conditions. In order to analyze which driving style is more efficient in terms of the system of the EV, we develop the electric vehicle model and apply several types of speed profiles such as different steady speeds, acceleration/deceleration, and a real world driving cycle including the elevation profile obtained from a GPS device. The results show that the energy consumption of the EV is affected by the operating efficiency of components when driving at low speed, while it depends on required power at wheels when driving at high speed. Also this paper investigates the effect of the elevation of a road and the rate of electrical braking on the energy consumption as well as the fuel economy of a conventional vehicle model under the same conditions.

• 한국CDE학회논문집
• /
• 제19권1호
• /
• pp.80-90
• /
• 2014

In architecture projects, BIM library has widely been using for prefabrication of products and design process. However, since the shape of structures is different by each project in civil engineering projects and a shape representation system is complicated, it is not easy to develop a standardized BIM library. To solve these issues, this study develops BIM library based on standardized 2D shop drawings for civil structures. The standardized shop drawings, which are the targets of the BIM library model, should be first selected. Besides, in order to define modeling scope with the level of general and shop drawings for each structure, LOD(Level of Detail) and breakdown structure are determined, and development methods of families of 3D object type including 2D profile and rebar through commercial software are established. With these, properties of BIM library are configured, and a utilization model of the BIM libraries is constructed for 3D modeling and a simulation using the BIM library. Therefore, this study can identify properties that are necessary when IFC schema is configured for civil engineering projects. For future, it is expected that easiness of BIM design for the civil engineering projects and generation, management, and analysis system of BIM library for road projects will be secured.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.959-967
• /
• 1988

본 연구에서는 반능동형 감쇠기의 작동기준을 설정하고 그것의 타당성을 조사 하는 것이 주목적이어서 속도에 대한 고려는 제외하였다.이때 반능동형 감쇠계가 고정된 감쇠계수를 갖는 감쇠기로 구성된 계보다 얼마만큼 성능이 향상되며 능동형 감 쇠기(감쇠계수를 제한된 영역내에서 순간순간 조절하여 변화시킬 수 있는 감쇠기)를 갖는 계에 얼마만큼 접근하는가가 비교되어진다.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.13-20
• /
• 2016

교량은 지속적인 규모의 증가와 노후화의 확대로 인해 전산화된 관리 체계가 요구되었다. 국내외 교량관리시스템(Bridge Management System; BMS) 개발 동향 및 기능의 비교, 고찰을 통해 생애주기 관리가 가능한 ICT (Information and Communication Technology) 기반 교량 관리 체계를 제안하였다. BMS는 인터넷과 모바일이 결합된 운영 체계에 GIS 기능과 객체 기반 정보 관리 체계를 바탕으로 개발되었다. BMS는 교량의 생애주기 동안 발생되는 모든 정보의 객체 기반 정보화를 수행하여, 생애주기 성능 변화와 소요 예산의 추정을 바탕으로 중장기 관리 전략과 단기 관리 계획의 수립을 지원한다. 실제 공용중인 교량 약 6천 개소에 대한 생애주기 관리 전략 수립을 통해 의사 결정 지원을 위한 유용한 지식 정보를 도출하였다. 전국의 모든 도로교량에 적용 가능하도록 개발된 BMS는 정확한 이력 관리를 통한 성능 유지, 합리적인 예산 관리를 통한 비용 절감, 현장 정보 수집의 편의성 및 신뢰성 증진을 위해 실제적, 실용적으로 활용될 수 있을 것으로 판단된다.