• 환경영향평가
• /
• 제21권4호
• /
• pp.567-572
• /
• 2012

This paper suggests the set-up plan of the assessment scope in road noise considering road characteristics with the prediction model of road noise. The RLS90 prediction model with some assumptions is used to establish the assessment scope of road noise. The main contents of the applied assumptions are smooth drive of cars, flat region, location of all noise sources in one lane, drive in design speed, and set-up of assessment scope according to traffic volume and car speed. The information of traffic volume to predict road noise is obtained by the distribution of small cars and full-sized cars in road. In this study, the total traffic volume in road is computed by adding the number of small cars to the conversion number of small cars, which means the number of small cars making the same noise as one full-sized car. The prediction result of road noise with the influence factor of traffic volume, car speed, distance between road and receiver is presented. The resultant assessment scope of road noise is obtained by combining road noise prediction data with the set-up standard of road noise assessment scope.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.63-68
• /
• 2015

PURPOSES : A study on the efforts to minimize the road traffic noise has been underway. An attempt has been made to measure the noise level using a noise map; however, the attempt is limited to certain areas only. In general, a noise barrier is employed to prevent road traffic noise; however, unplanned noise barriers developed without considering the surrounding environment, including excessively high walls, cause problems such as infringement on prospect right. Noise ceiling at daytime in Korea is 68 dB(A), which is relatively higher than in other countries. METHODS: The noise barrier used mainly for road noise reduction was analyzed to estimate the optimal height. Related variables such as road width, the height of the upper part, distance to the building, and angle (for instance, $30^{\circ}$). RESULTS : A formula to calculate the optical height of the noise barrier, considering the road environment (i.e., parameters such as road width and distance to building), was developed in this study in an attempt to mitigate the noise generated from the road. CONCLUSIONS : The formula to calculate the noise barrier is expected to lead to cost saving, accurate installation of barriers, and protection of the right of prospect.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.1015-1020
• /
• 2004

The road traffic noise becomes aggravated due to the rapid increase of vehicles. It has a great effect on the dwelling environment. Therefore we investigate the characteristics and sources of the road traffic noise through grasping the status of the road traffic noise. This paper is concerned with the description of the various factors affecting the generation and propagation of outdoor traffic noise. It is particularly concerned with the mathematical interpretation of these processes and the resulting development of prediction techniques which are now broadly used for both the environment impact assessment of road traffic noise and the planning and design of roads and adjoining land use.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.535-541
• /
• 2004

For housing estate of a new administrative capital city, Noise reduction method is a important design factor. As measuring a noise level of traffic noise according to separation from road, it can be created a quite housing estate. Analyzing of merits and demerits in sound barrier walls and tunnels can be proposed environment friendly soundproofing facilities. Number of measurement was performed to know what kind of layout of housing estate is good for noise reduction. Through this measurement, ㄷ shaped layout or parallel layout has the advantage of sound insulation rather than right angled layout. In this case (ㄷ shaped layout or parallel layout) buildings neighboring to the road should be designed to insulate sound. Evergreen trees should be planted between housing estate and road more than 30m (at least 7～8m) in order to reduce noise and have masking effects. If broad-leaved trees are planted more than 30m, approximately 10dB noise is reduced and 2～4dB if 7～8m. Roads in the estate should be designed considering pedestrians first, and special roads for moving and ambulance should be designed as skew road, if possible. The result shows that 15$^{\circ}$-sloped‘S’road reduces 1～2dB noise and 30$^{\circ}$-sloped road reduces 4～7dB. If noise barrier is inevitably installed, it should be designed to go well wit neighboring environment so as to install Environment Friendly Noise Barrier using materials and trees including wood and soil. Through this study the results are used to guideline for construction of environment friendly housing estate

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.711-718
• /
• 2001

The tyre/road noise becomes aggravated due to the rapid increase of motor vehicles. It has a great effect on the dwelling environment. Therefore we investigate the characteristics and sources of the tyre/road noise through grasping the status of the tyre/road noise. Traffic noise results from the collective contribution of the noise produced by individual motor vehicles. The tyre/road noise varies enormously depending upon its type and mode of operation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.512-517
• /
• 2000

The road traffic noise becomes aggravated due to the rapid increase of vehicles. It has a great effect on the dwelling environment. Therefore we investigate the characteristics and sources of the road traffic noise through grasping the status of the road traffic noise. This report is concerned with the description of the various factors affecting the generation and propagation of outdoor traffic noise. It is particularly concerned with the mathematical interpretation of these processes and the resulting development of prediction techniques which are now broadly used for both the environment impact assessment of road traffic noise and the planning and design of roads and adjoining land use.

• 환경영향평가
• /
• 제23권2호
• /
• pp.112-118
• /
• 2014

The application of a 3-d noise prediction model is increasing as a tool for performing actual noise assessment in order to investigate the noise impact of the residential facility around a development region. However, because the appropriate plans of applying a 3-d noise prediction model is insufficient, it is important to secure the reliability of the noise prediction results generated by a 3-d noise prediction model. Therefore, this study is focused on examining a 3-d noise prediction model, and a prediction equation and input data in it. For this, the 3-d noise prediction models such as SoundPLAN, Cadna-A, IMMI is applied in road noise. After the contents of road noise equations, input data of road noise source, and input data of road noise barrier are understood, the road noise prediction results are compared and examined according to the variation of 3-d noise prediction model, road noise equation, and input data of road noise source and road noise barrier.

• KIEAE Journal
• /
• 제4권3호
• /
• pp.95-101
• /
• 2004

As a part of acoustical design, it is often necessary to quantify aspects of an existing environment and to predict the result of adding an acoustical treatment. The most common sources of exterior noise, also termed as environmental noise,(or community noise) are traffic noise, air craft noise, industrial noise, etc. Transportation(air, road, and rail)noise is the dominant and most common source of noise exposure in residential neighborhoods, and the annoyance is its most consequential effect. The road traffic noise becomes aggravated due to the rapid increase of vehicles. It has a great effect on the dwelling environment. Therefore we investigate the characteristics and sources of the road traffic noise through grasping the status of the road traffic noise. In the present study, preceding studies investigated the noise level of urban areas in Seoul were reviewed and the noise level of urban areas in Seoul was measured at first, fifth, tenth, and nineteenth floor for two days of weekdays and two days of weekend.

• 한국환경과학회지
• /
• 제16권7호
• /
• pp.823-830
• /
• 2007

Traffic noise is a kind of noise caused by cars, trains and aircraft. Among them, noise produced by cars is the most important factor in cities. According to the National Institute of Environmental Research(NIER)'s survey, Road traffic noise levels in Susan are the highest of all the cities in Korea. So, appropriate measures for road traffic noise reduction is required. For this purpose, the construction of a noise map in Susan will playa vital role. However, road traffic noise formulas are constructed considering regional characteristics such as each country road's environment and vehicle quality. Therefore, prior to constructing a noise map in Susan, examination processes about each formula constituent status and estimation process are required preferentially. In this research, the basic first stage is to estimate Susan's road traffic noise. First, investigate characteristics of each road traffic noise estimate and using this, a noise map is constructed for road traffic noise in Susan. Then the adaptation of a road traffic noise formula is evaluated.

• 환경영향평가
• /
• 제10권4호
• /
• pp.297-304
• /
• 2001

Recently the road traffic noise has appeared as a significant environmental issue because of dramatic increase of vehicles and expansion of newly constructed road. Therefore, this study proposes the method that improves prediction factors and models through analysis of the existing road traffic noise prediction model. Prediction factors can be improved by establishing guideline for diffraction attenuation and applying daily traffic discharge, peak traffic discharge, and average traveling speed through an analysis of level service. Prediction must be made by periods of one or five years during 20 years. Prediction models also can be improved to include better prediction model through setting the database, establishing functional relation between physical properties and noise levels by acoustic analysis, and developing models for road traffic noise prediction in residential areas.