• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.293-301
• /
• 2005

In case of the roads that pass the mountain area, the cut sections or the tunnels are constructed. And In winter season it appears sunshine few in the specific segment, the shade is continued last and the freezing sections occur. So, the attention is necessary in traffic safety. This study was to evaluate the influence of sunshine and surface freezing sections expected in route plans of roads using GIS and makes alternative ideas in road stability security. After selecting 29 km sections of Donghae highway and creating a 3 dimensional terrain surface through the digital conversion of design plan data, it reflects the road alignment data of the same coordinates and a 3 dimensional road modeling is created. It set shadow time of road surface for the solar trace in the winter solstice in 20 minute interval. Shade areas are displayed and inputed in polygon data by manual vertorizing. Graphic and attribute data of this shade section is constructed in geodatabase of ArcCatalog. And it extracted the freezing section using intersect fuction of the GIS spatial analysis. By analyzing the winter meteorological data of temperature, rainfall, snowfall, humidity, and etc. and grasping dangerous freezing section of the road surface effectively, it will be able to make alternative ideas of the preliminary stability evaluation reflected in basic design.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.117-132
• /
• 2022

The purpose of this study is to analyze factors that affect road users' acceptance of fully autonomous vehicles (level 4 or higher). A survey was done with drivers of general cars and pedestrians who share roads with fully autonomous vehicles. Five acceptability factors were selected: trust towards technology, compatibility, policy, perceived safety, and perceived usefulness. The effect on behavioral intention was analyzed using structural equation modeling (SEM). The perceived safety and trust towards technology were found to be very important in the acceptance of fully autonomous vehicles, regardless of the respondent, and policy was not influential. Compatibility and perceived usefulness were particularly influential factors for drivers. In order to improve the acceptance by road users, securing technical completeness of fully autonomous vehicles is important. Certification and evaluation of the safe driving ability of fully autonomous vehicles should be thoroughly performed, and based on the results, it is necessary to improve the perception by road users. It is necessary to positively recognize fully autonomous vehicles through education and publicity for road users and to support their smooth interaction.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.375-382
• /
• 2007

The multi-driver off-road vehicle drive-line consists of many components, with close connections among them. In order to design and analyze the drive-line efficiently, a modular methodology should be taken. The aim of a modular approach to the modeling of complex systems is to support behavior analysis and simulation in an iterative and thus complex engineering process, by using encapsulated submodels of components and of their interfaces. Multi-driver off-road vehicles are comparatively complicated. The driving-line is an important core part to the vehicle, it has a significant contribution to the performance. Multi-driver off-road vehicles have complex driving-lines, so performance is heavily dependent on the driving-line. A typical off-road vehicle's driving-line system consists of a torque converter, transmission, transfer case and driving-axles, which transfers the power generated by the engine and distributes it effectively to the driving wheels according to the road condition. According to its main function, this paper proposes a modularized approach for design and evaluation of the vehicle's driving-line. It can be used to effectively estimate the performance of the driving-line during the concept design stage. Through an appropriate analysis and assessment method, an optimal design can be reached. This method has been applied to practical vehicle design, it can improve the design efficiency and is convenient to assess and validate the performance of a vehicle, especially of multi-driver off-road vehicles.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.249-257
• /
• 2018

The purpose of this study is to construct a virtual reality simulation environment for searching and evaluating evaluation criteria for road safety facilities with new technologies. Virtual reality simulation requires high realism and accurate behavior data extraction. To do this, we used the Unreal Engine to create the environment by dividing it into an external environment and a vehicle environment. After that, a sample simulation for the luminescent road markers and preliminary experiments were conducted. As a result, luminescent road markers showed better 5m interval than 10m interval. It can be confirmed that it can be used in the simulation for searching the evaluation criteria for the new road safety facilities that incorporate the new technology in the future. In the future, it will be possible to simulate various environments by adding modeling and sample components for other road facilities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.841-854
• /
• 2020

The paper explains the method to process, analyze and predict traffic patterns in Los Angeles county using Big Data and Machine Learning. The dataset is used from a popular navigating platform in the USA, which tracks information on the road using connected users' devices and also collects reports shared by the users through the app. The dataset mainly consists of information about traffic jams and traffic incidents reported by users, such as road closure, hazards, accidents. The major contribution of this paper is to give a clear view of how the large-scale road traffic data can be stored and processed using the Big Data system - Hadoop and its ecosystem (Hive). In addition, analysis is explained with the help of visuals using Business Intelligence and prediction with classification machine learning model on the sampled traffic data is presented using Azure ML. The process of modeling, as well as results, are interpreted using metrics: accuracy, precision and recall.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.449-452
• /
• 1998

In this study, the basic image-board and algorithm has been developed to extract a road lane by modeling the driving process. The high speed processing enables an image capture, processing and prompt decision making. In order to high speed processing ASIC like FPGA was designed and integrated in one board system. The algorithm enabling road driving must recognize a straight and bend edge separately. The high speed image processing board using FPGA can be used in real-time decision makeing system for road driving and in the machine vision under bad working environments like a coal mine. And it also can be used in the safety control system in subway and in image input system of CCTV and CATV by designing the board to meet various user's needs.

• Journal of Environmental Impact Assessment
• /
• v.19 no.1
• /
• pp.59-74
• /
• 2010

The trend of the PM10 concentrations in the Seoul Metropolitan Area (SMA) is reviewed and relative contributions of major contributors (paved road emissions and long-range transport from outside the SMA) are discussed. It was shown that the PM10 concentrations in the SMA have generally decreased except Incheon between 1999 and 2005. Further, it was identified that the difference of the PM10 mass concentration between the roadside stations and urban ambient stations has decreased between 2004 and 2008. Based on the emission estimates, it was suggested that the reduction of resuspension of aerosols on the road is the major reason for that. Based on the modeling results, it was identified that outside effects be about 30% of the ambient PM10 concentration in the SMA. Further research and policy issues to identify major sources of PM10 in the SMA are discussed.

• Journal of Power System Engineering
• /
• v.6 no.2
• /
• pp.54-59
• /
• 2002

The principle of the FDM(fused deposition modeling) process is based on the layer by layer manufacturing technology, like other RP(rapid prototyping) process. In the FDM process, each layer may have different shape. Therefore, the built model may have stairs shape on its surface. This stairs shape is one of the serious problems in the FDM process. Thus in this study, cube models and spherical models were fabricated by FDM process to investigate the influence of injection amount on surface roughness. Models with various road width were also built to investigate the influence of road width on surface roughness. Surface roughness of the models was measured and analyzed. The result obtained in this study are expected to help selecting the part build orientation for optimum surface roughness.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.11
• /
• pp.1071-1077
• /
• 2010

The reduction of the vehicle interior noise has been the main interest of noise and vibration harshness(NVH) engineers. A passenger vehicle has various and complicated transmission paths of sound and vibration. In order to identify the mechanism of transfer path, estimation of excitation force and exact modeling of transfer path are required. This paper presents method for estimating the noise source contribution on the road noise of the vehicle in a multiple input system where the input sources may be coherent with each other. And vector synthesis technique is employed to identify the characteristics of road noise and its transmission to vehicle compartment through noise and vibration analysis. Vibration reduction efficiency of each transfer path is evaluated by comparing individual vector components obtained virtual simulation.

• Journal of Navigation and Port Research
• /
• v.36 no.7
• /
• pp.591-597
• /
• 2012

Generally an urban freeway means a primary arterial which provides road users with a free-flow speed, except for ramp junctions during rush hours. However, most road users suffer from traffic congestion in the basic segments as well as in the ramp junctions of urban freeway during rush hours, because most road users prefer urban freeways to local roads in the urban areas. This study then intends to analyze lane traffic characteristics of urban freeway basic segments having more freight vehicles during rush hours, find the lane showing a high correlation with the segment speed between lane speeds, and finally suggest a segment-speed predictive model by the lane speed of urban freeway basic segments during rush hours.