• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.297-304
• /
• 2013

Due to its excessive $CO_2$ emissions, road transport sector becomes a target for emission reduction strategies. Although precise and reliable emissions inventories are necessary for evaluating plans and strategies, developing the region-wide inventory is a difficult task mainly because of a lack of data including travel patterns and modal volumes in the reginonal context. Most existing inventory methodologies employ fuel sale data within the target region, which ignores actual regional traffic patterns and thus not suited to its geographical context. To overcome these problems, this study develops region-wide $CO_2$ emissions inventory methodology by utilizing the Korea Transport DB (KTDB). KTDB provides a number of useful information and data, such as road network with which one can identify in and out trips over the entire region, traffic volumes of various modes, distance of travel, travel speed and so on. A model of equations that allow the computation of volume of $CO_2$ emitting from the road transport activities within the target region is developed. Using the model, numerical analyses are performed for the case of Busan Metropolitan City to demonstrate the applicability of the developed model. This study is indeed exploratory in the sense that using the existing data, it develops the $CO_2$ emissions inventory methodology which can produce better results than those from conventional fuel sales methodology. This study also suggests further reresarch directions to develop more refined methodologies in region-wide basis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.55-66
• /
• 2020

This study developed four algorithms and their associated indices that can quantify and qualify road hazards along roadways. Initially, relevant raw data can be collected from commercial vehicles by camera and DTG. Well-processed data, such as potholes, road freezing, and fog, can be generated from the Integrated management system. Road hazard algorithms combine these data with road inventory data in the Data Sharing Platform. Depending on well-processed data, four different road hazard algorithms and their associated indices were developed. To test the algorithms, an experimental plan based on passive DTG attached in probe vehicles was performed at two different test locations. Selection of the test routes was based on historical data. Although there were limitations using random data for commercial vehicles, hazardous roadways sections, such as fog, road freezing, and potholes, were generated based on actual historical data. As a result, no algorithm error was found in the entire test. Because this study provides road hazard information according to a section, not a point, it can be practically helpful to road users as well as road agencies.

• Asian Journal of Atmospheric Environment
• /
• v.2 no.1
• /
• pp.34-46
• /
• 2008

Emissions inputs for use in air quality modeling of Korea were generated with the emissions inventory data from the National Institute of Environmental Research (NIER), maintained under the Clean Air Policy Support System (CAPSS) database. Source Classification Codes (SCC) in the Korea emissions inventory were adapted to use with the U.S. EPA's Sparse Matrix Operator Kernel Emissions (SMOKE) by finding the best-matching SMOKE default SCCs for the chemical speciation and temporal allocation. A set of 19 surrogate spatial allocation factors for South Korea were developed utilizing the Multi-scale Integrated Modeling System (MIMS) Spatial Allocator and Korean GIS databases. The mobile and area source emissions data, after temporal allocation, show typical sinusoidal diurnal variations with high peaks during daytime, while point source emissions show weak diurnal variations. The model-ready emissions are speciated for the carbon bond version 4 (CB-4) chemical mechanism. Volatile organic carbon (VOC) emissions from painting related industries in area source category significantly contribute to TOL (Toluene) and XYL (Xylene) emissions. ETH (Ethylene) emissions are largely contributed from point industrial incineration facilities and various mobile sources. On the other hand, a large portion of OLE (Olefin) emissions are speciated from mobile sources in addition to those contributed by the polypropylene industry in point source. It was found that FORM (Formaldehyde) is mostly emitted from petroleum industry and heavy duty diesel vehicles. Chemical speciation of PM2.5 emissions shows that PEC (primary fine elemental carbon) and POA (primary fine organic aerosol) are the most abundant species from diesel and gasoline vehicles. To reduce uncertainties in processing the Korea emission inventory due to the mapping of Korean SCCs to those of U.S., it would be practical to develop and use domestic source profiles for the top 10 SCCs for area and point sources and top 5 SCCs for on-road mobile sources when VOC emissions from the sources are more than 90% of the total.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1274-1281
• /
• 2010

Cut Slope Management System(CSMS) is a systematic maintenance and management system designed to prevent the collapse of cut slopes located along national roads and to minimize damages caused by slope collapse related accidents. In order to implement a maintenance and management system that will ensure safe road operation, the Korean government has started the inventory of cut slopes and developed a cut slope database since 2006. The study on the application of cut slope database is on-going and part of this study is the development of cut slope database management system (Slope-navi) using GIS technology and navigation system for the effective and efficient cut slope management using Information Technology. Using the Navigation Cut Slope Data Management System the previously developed database was checked and verified. The converted cut slope inventory data and field investigation reports of about 20,000 cut slopes were loaded in the navigation map. Through the development of the navigation's cut slope data search system, a systematic and efficient cut slope database management and operation in the prevention of slope collapse and remedial measure selection was established.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.114-128
• /
• 2013

Greenhouse gas emissions have been an important issue in different countries because of their effects on global warming. The government has to organize greenhouse gas reduction measures suitable to regional characteristics by establishing annual implementation plans and comprehensive policies based on the UNFCCC. The transportation sector is one of the major contributors of air pollution; hence increasing need to estimate current and future traffic emissions precisely. Under these circumstances, a number of emission models have been developed recently. However, current methods of estimation cannot carry out effective analyses because it does not reflect vehicle movement characteristics. This study aims to present a new method for calculating road traffic emissions in Goyang city. A travel demand model is utilized to carry out GHG emission estimates according the traffic data (fleet composition, vehicle kilometers travelled, traffic intensity, road type, emission factors and speed). This study evaluates two approaches to estimate the road traffic emissions in Goyang City: Pollution-Emis and the Handbook of Emission Factors for Road Transport (HBEFA v.3.1) which is representative of the "average speed" and the "traffic situation" model types. The evaluation of results shows that the proposed emission estimation method may be a good practice if vigilant implementation of model inputs is observed.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.694-702
• /
• 2014

Since Greenhouse Gas Inventory & Research Center (GIR) of Korea was founded in 2010, the annual greenhouse gas inventory reports, one of the collections of GIR's major affairs, have been published from 2012. In the reports many items related to greenhouse gas emission quantities are included, but among them uncertainty values are replaced to basic values which IPCC guideline suggests. Even though IPCC guideline suggests the equations of each Tier level in details, the guideline recommends developing nation's own methodology on uncertainty which is closely related to statistical problems such as the estimation of a probability density function or Monte carlo methods. In the road transportation sector the emissions have been calculated by Tier 1 but the uncertainties have not been reported. This study introduce a bootstrap technique and Monte carlo method to estimates annual emission quantity and uncertainty, given activity data and emission factors such as annual traveled distances, fuel efficiencies and emission coefficients.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.145-154
• /
• 2014

The road network becomes more complex and extensive. Therefore, the inconveniences are caused in accordance with the time delay of the restoration of damaged roads, demands for excessive costs on information collection, and limitations on acquisition of damage information of the roads. Recently, road centric spatial information is gathered using mobile multi sensor system for road inventory. But expensive MMS(Mobile Mapping System) equipments require high maintenance costs from beginning and takes a lot of time in the data processing. So research is needed for continuous maintenance by collecting and displaying the damaged information on a digital map using low cost mobile camera system. In this research we aim to develop the techniques for mosaic with a regular ground sample distance using successive image from oblique camera on a vehicle. For doing this, mosaic image is generated by estimating the homography of high resolution oblique image, and the ground sample distance and appropriate overlap are analyzed using high resolution aerial oblique images which contain resolution target. Based on this we have proposed the appropriate overlap and exposure interval for mobile road inventory system.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.239-252
• /
• 1998

Based on forestry inventory data and various informations, this study was conducted to analyze the silvicultural activities by distance classes from forest road and to evaluate their effects in the area of Mt. Gari managed by Chunchon Regional Office of Northern Forest Management Office. The results were summarized as follows; 1) Most harvesting practice(67.9%) was done within 500m from forest roads, in the order of Pumgul, Saorang, and Kongkol forest road. And thinning practice was not related to the distance from forest road, produced $440.6m^3$, 35.7% of total thinning volume within 1,000m width along the forest roads. 2) Planting of 530,461 seedlings, 66.8% of total planting stock, in 176.9ha, 66.6% of total area within 1,000m from forest road, and supplementary planting of 46,243 seedlings was done in 15.4ha, 42.9% of total area within 500m from forest road. Areas and numbers of seedlings of two planting practices were in the order of Pumgul and Byungatur forest road. 3) Tending operation was done in 330.0ha, 60.3% of total area within 500m from forest road, and pre-commercial thinning was done in 693.6ha, 71.2% of total area. Areas of intermediate cutting practices were in the order of Pumgul, Korkol, and Saorang forest road.

• Geomechanics and Engineering
• /
• v.37 no.2
• /
• pp.135-147
• /
• 2024

A GIS-based landslide susceptibility mapping (LSM) was carried out using frequency ratio (FR), modified frequency ratio (M-FR), analytic hierarchy process (AHP), and modified analytic hierarchy process (M-AHP) methods to identify and delineate the potential failure zones along the Halong - Vandon expressway. The thematic layers of various landslide causative factors were generated for modeling in GIS, including geology, rainfall, distance to fault, distance to road, slope, aspect, landuse, density of landslide, vertical relief, and horizontal relief. In addition, a landslide inventory along the road network was prepared using data provided by the management department during the course of construction and operation from 2017 to 2019, when many landslides were documented. The validation results showed that the M-FR method had the highest AUC value (AUC = 0.971), which was followed by the FR method with AUC = 0.961. The AUC values were 0.939 and 0.892 for the M-AHP and AHP methods, respectively. The generated LSM obtained from M-FR method classified the study area into five susceptibility classes: very low (0), low (0-1), moderate (1-2), high (2-3), and very high (3-4) classes, which could be useful for various stakeholders like planners, engineers, designers, and local public for future construction and maintenance in the study area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.71-77
• /
• 2010

Cut Slope Management System(CSMS) is a systematic maintenance and management system designed to prevent the collapse of cut slopes located along national roads. In order to implement safe road operation system, KICT has started the inventory of cut slopes and developed a cut slope database since 2006. Cut slope database management system using GIS technology and navigation system was developed as a Information Technology application. Through the Cut Slope Navigation System(SLOPE-Navi.), the previously developed database was checked and verified. The converted cut slope inventory data and field investigation data of 28,707 cut slopes were loaded on the navigation map. We consider that the Cut Slope Navigation Management System can be useful as in-situ system, which can be systematic and effective DB management and operation to prevent cut slope collapses and establish a remedial countermeasure as mitigation concerning disasters.