• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.129-134
• /
• 2017

This study aims to develop the traffic accident models by circular intersection type using count data model. The number of accident, the number of fatal and injured persons(FSI), and EPDO are calculated from the traffic accident data of TAAS. The circular intersection accident models are developed through Poisson and negative binomial regression analysis. The main results of this study are as follows. First, the null hypotheses that there are differences in the number of traffic accidents, FSI and EPDO by type of circular intersections are rejected. Second, the scale of intersection(median, large), number of approach road, mean width and length of exit road, area of the circulating roadway and central island are selected as factors influencing the number of traffic accidents, FSI and EPDO in rotary. Third, the scale of intersection(median), guide signs(limited speed, direction, roundabout), number of approach road, entry angle, area of the intersection and central island are adopted as factors influencing the number of traffic accidents, FSI and EPDO in roundabout. Finally, transferring from rotary to roundabout could be expected to make the accident decrease.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.127-135
• /
• 2018

PURPOSES : Traffic cameras have been installed to reduce traffic accidents. The effectiveness of traffic cameras has been proved by dozens of studies, but recently questions over its effectiveness have been raised by a series of studies. In this study, the effectiveness of traffic cameras was analyzed with a focus on different road environments. METHODS : The effectiveness of the traffic cameras was analyzed by extracting the occurence frequency before and after camera installation. The effect of reduction was analyzed comprehensively considering the installation position, monitoring direction, and surrounding environment of traffic cameras. RESULTS : The result of this study is as follows. First, the installation of cameras in an area with relatively low accidental traffic was more effective. Secondly, the effect of camera installation on car-to-pedestrian collisions was better than that of car-to-car collisions. Thirdly, accidents tended to occur more frequently when cameras were installed in front of the accident-prone owing to the negative spill-over effect. CONCLUSIONS : The result can be used to guide placement of traffic cameras. Moreover, the installation of cameras with consideration of the road environment is expected to contribute to a reduction in traffic fatalities.

• Journal of Korean Society of Forest Science
• /
• v.76 no.2
• /
• pp.161-168
• /
• 1987

Forest road (10 Km) constructed for the demonstrational purpose by Forest Work Training Center (F.T.C.) in 1984 was partly damaged through the roadside landside and ditch erosion by the typhoon in 1986. The causes were investigated to apply for protecting against the damage of mountain forest road. The damaging length caused by roadside landside is around 3% out of total length of 10 Km forest road, and mostly coming from the curve road filled up more than 10 m slope length on the concave mountain slope, partly from the foot of fillslope along the ever-following valley and from the both side of fillslope under the outlet of culvert with ever-flowing water. In case of ditch erosion, the big damage at V-type ditch is coming from the overflow of valley water flowing down along the inside slope. Other problem is also showing in the steepness of longitudial gradient, which is felt as a problem in road to be constructed under more than 10 persent of gradient. Other cause of ditch erosion is coming from the bury of sand basin (water collecting wall) by the debris in small diameter culvert zone, namely less than 400mm, in diameter and by the soil mass slumped down from steep wall slope. From above results the causes of F.T.C. model road damage is showing to come from no-following the general guide or little experience to protect against the forest road damage. When improved above mentioned mistakes, F.T.C. Method of mountain forest road type could be developed as a model of Mountain forest road.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.616-621
• /
• 2006

Recently many cars are equipping a navigation system. The main purpose of the early system guides a user through the route. A navigation system includes various abilities by development of various technologies and it has given more convenience to user. It can play various records on the tape and announces which are useful information about each road. Also it can use various multi-media contents by DMB device during driving. However, guide function of basic and important road in the navigation system has not grown greatly yet. In this paper, we proposed recommendation method of human-friendly road considering user's condition through various information of outside environment, user's velocity intention, a driver's emotion and a preference of the road. Modules consists of hierarchical structure that can easily correct and add each algorithm and those use fuzzy logic algorithm.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.193-203
• /
• 2008

This study was conducted to investigate the feasibility of the expedite construction of new pavement systems using precast concrete slabs and to develop the design and construction guide based on the results of the experimental construction. Half scale concrete slabs were designed and fabricated and the optimal reinforcement design, linkages between the slabs in the longitudinal and transverse directions, and the grouting methods were investigated. The experimental construction was performed fast and easily by assembling two slabs in the longitudinal direction and the other two in the transverse direction. The slabs were leveled and the pockets and the space between the slab bottom and the underlying layer were grouted. From the experimental construction, details about the design and construction of the precast pavements were acquired. Finally, the design and construction guide for the newly constructed precast concrete pavement systems was developed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.119-133
• /
• 2022

Due to the improvement of surveying, mapping and communication techniques, various apps for road direction guides and vehicle navigations have been developed. Although such a development has impacted on walking and driving, there is a limit to improving the daily convenience of the socially impaired people. This is mainly due to the fact that the software have been developed for normal pedestrians and drivers. Therefore, visually impaired people still have problems with the confusion of direction and/or non-provision of risk factors in walking. This study aimed to propose a scheme which constructs data for mobility-impaired or traffic-impaired people based on various geospatial information. The factors and components related to walking for the visually impaired are selected by geospatial data and a walking route guidance network that can be applied to a commercial software. As a result, it was confirmed that road direction guidance would be possible if additional contents, such as braille blocks (dotted/linear), sound signals, bus stops, and bollards are secured. In addition, an initial version of the application software was implemented based on the suggested data model and its usefulness was evaluated to a visually impaired person. To advance the stability of the service in walking for the visually impaired people, various geospatial data obtained by multiple institutes are necessary to be combined, and various sensors and voice technologies are required to be connected and utilized through ICT (Information and Communications Technologies) technology in near future.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.99-118
• /
• 2018

Recently, the limit state design method in the design of the structure is in global trend, but it is limited to a few structures in Korea. Since the introduction of the limit state design method has recently been attempted for tunnels, which are the main underground structures, it is surely necessary to understand the latest limit state design method. Therefore, based on the recently published AASHTO LRFD Road Tunnel Design and Construction Guide Specification (2017), structural load factors and load combinations were reviewed, and various factors which should be applied for the review of structures have been analyzed. In this study, utility tunnel section and subway tunnel sections used in Korea were analyzed by the limit state design method, and we have analyzed the direction of application of limit state design method through studying the tendency of member force by various influential factors such as ground conditions, load modifier and joint stiffness.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.83-90
• /
• 2016

PURPOSES : Nowadays, cavity phenomena occur increasingly in pavement layers of downtown areas. This leads to an increment in the number of potholes, sinkholes, and other failure on the road. A loss of earth and sand from the pavement plays a key role in the occurrence of cavities, and, hence, a structural-performance evaluation of the pavement is essential. METHODS: The structural performance was evaluated via finite-element analysis using KPRP and KICTPAVE. KPRP was developed in order to formulate a Korean pavement design guide, which is based on a mechanical-empirical pavement design guide (M-EPDG). RESULTS: Installation of the anti-freezing layer yielded a fatigue crack, permanent deformation, and international roughness index (IRI) of 13%, 0.7 cm, and 3.0 m/km, respectively, as determined from the performance analysis conducted via KPRP. These values satisfy the design standards (fatigue crack: 20%, permanent deformation: 1.3 cm, IRI: 3.5 m/km). The results of FEM, using KICTPAVE, are shown in Figures 8~12 and Tables 3~5. CONCLUSIONS: The results of the performance analysis (conducted via KPRP) satisfy the design standards, even if the thickness of the anti-freezing layer is not considered. The corresponding values (i.e., 13%, 0.7 cm, and 3.0 m/km) are obtained for all conditions under which this layer is applied. Furthermore, the stress and strain on the interlayer between the sub-grade and the anti-freezing layer decrease gradually with increasing thickness of the anti-freezing layer. In contrast, the strain on the interlayer between the sub-base and the anti-freezing layer increases gradually with this increase in thickness.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.3
• /
• pp.119-127
• /
• 2019

In this study, we investigated the application of deep learning to the manufacturing process of traffic and road signs which are constituting the road layer in map production with 1 / 1,000 digital topographic map. Automated classification of road traffic sign images was carried out through construction of training data for images acquired by using transfer learning which is used in image classification of deep learning. As a result of the analysis, the signs of attention, regulation, direction and assistance were irregular due to various factors such as the quality of the photographed images and sign shape, but in the case of the guide sign, the accuracy was higher than 97%. In the digital mapping, it is expected that the automatic image classification method using transfer learning will increase the utilization in data acquisition and classification of various layers including traffic safety signs.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.1 s.11
• /
• pp.19-26
• /
• 1998

In general, GIS provides a user with geographical information according to his requirements after a computer stores digitized spatial data from real scenes. Geographical information from digitized spatial data lacks of reality due to the exclusion of real scenes. However, Augmented Reality(AR) allows a user to see the real world with virtual objects superimposed upon or composited with the real world. Therefore it enhances a user's perception of the real world. In this paper, we present the development on 3D geographical information guide system using augmented reality that displays the real world with virtual objects such as building name, road name, etc., in real time.