• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.263-266
• /
• 2010

The research design of the road for the LiDAR survey data was available, LiDAR data currently exists for this area Daejeon, Gongju area two map sheet selected of the LiDAR data and figures were produced using the DEM, respectively. The scale 1 / 5, 000 of figures produced by using the DEM and LiDAR DEM data comparing the results produced by the difference in some areas or That could be found. The accuracy of LiDAR data in the road design to use more accurate information on terrain, roads and construction of the linear installation cost savings Contribution will be considered.

• 한국소음진동공학회논문집
• /
• 제16권8호
• /
• pp.806-813
• /
• 2006

An important factor of vibration test using MAST(multi axial simulation table) system is the reliance of input excitation source. Generally the generation of input excitation source is obtained by the measured data on special road in proving ground. The measured data on special road have more exciting energy than the data of real fields, therefore the time and expense for test can be reduced. But the magnitude of input excitation source must be defined by comparison with the excited energy on real field. The object of this paper makes the data base of domestic roads for the definition of input excitation source which is obtained by the measured data on special road in proving ground. These real field data on domestic roads are analyzed by the power spectral density and interrelationship index.

• 한국산림과학회지
• /
• 제90권4호
• /
• pp.420-430
• /
• 2001

임도개설상(林道開設上)의 기술적인 문제(問題)와 현장애로를 해소하기 위하여 임도(林道)의 직접적인 효과(效果)인 집재비(集材費)와 개설비(開設費)를 중심으로 투자효과(投資效果)를 최대(最大)로 하는 임도망(林道網) 배치(配置)프로그램을 개발(開發)하였다. 프로그램은 Windows 95/98을 운영체제로 하고 Microsoft Visual Basic 5.0을 사용하여 전체 인터페이스 설계(設計)와 계산 프로그램을 작성하였으며, 인터페이스는 계층적인 구조(構造)로 설계(設計)하고 GUI의 형태(形態)로 제공(提供)하였다. 프로그램 개발에 사용한 입력데이터는 Map데이터(지리정보(地理情報)데이터)로서 수치지형도(數値地形圖)(DTM), 계획구역구분도(計劃區域區分圖), 산림기능구분도(山林機能區分圖), 임내(林內) 도로망도(道路網圖)와 콘트롤데이터(계산용(計算用) 조건인자(條件因子) 테이터)인 임상별(林相別) 목재생산량(木材生産量) 및 노동투입량(勞動投入量), 지형별(地形別) 집재비(集材費), 지형별(地形別) 목도단가(林道單價), 노동단가(勞動單價), 임도(林道) 및 작업도(作業道) 우회율(迂回率), 보행거리계수(步行距離係數), 보행속도(步行速度) 등을 사용하였다. 개발된 프로그램은 현재의 임도개설비(林道開設費)로 향후 벌채(伐採)까지의 적정(適正) 임도밀도(林道密度)와 임도개설연장거리(林道開設延長距離)를 파악할 수 있다. 또한 임도노선배치(林道路線配置)를 프로그램화하여 직접적 경제효과(經濟效果)인 임업적(林業的) 효과(效果)를 제일 우선적으로 생각하여 최적(最適)의 임도노선(林道路線)이 배치(配置)할 수 있으며, 종전의 주관적인 임도노선배치(林道路線配置)보다는 많은 요인(要因)에 의하여 임도망(林道網)이 결정(決定)되고 좀 더 과학적이고 이론적인 임도노선배치(林道路線配置)가 가능하므로 투자효과(投資效果)를 최대(最大)로 하는 임도노선배치(林道路線配置) 계획법(計劃法)을 제시(提示)할 수가 있다. 또한 임도노선배치계산(林道路線配置計算)에서 임도노선(林道路線)마다의 배치우선순위(配置優先順位)가 프로그램상에서 결정(決定)되므로 임도노선배치(林道路線配置) 계획(計劃)을 시업계획(施業計劃)과 병행해서 결정(決定)할 수 있다.

• 소음진동
• /
• 제9권1호
• /
• pp.25-32
• /
• 1999

Ground vibrations induced from road were investigated to get the basic data that can be used to prepare countermeasures for environmental vibration problems. Vibration levels were measured simultaneously at three points in double distances from road. These data were analyzed with the type of vehicles. roads, media to understand the magnitudes and characteristics of distance attenuation of road vibrations. Vibration levels recorded on tapes were analyzed to understand the characteristics of frequency of road vibration. The range which could be influenced by the road vibration was estimated to take into account the mean of$L_{max}$ and distance attenuation of vibration level 5 m from roadside.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.150-156
• /
• 2017

A frozen road surface increases traffic accidents during the winter season. Hence, information on easily-frozen road sections and their specificities are required to prevent traffic accidents. Frozen road surfaces are determined by equipment measuring road surface temperatures. However, there are limitations in investigating the entire road network. Therefore, it is imperative to develop new methods that effectively determine road surface freezing risks. Meteorologically, road surfaces are frozen when the actual temperature cools down to the dew point temperature. Under this condition, there is likely to be frost if relative humidity reaches 100% and frozen road surfaces as the temperature gets lower. Meteorological characteristics give us an alternative to a direct measurement road surface temperature to estimate risks of road surface freezing. Based on the clues, the relationship between severity of traffic accidents and temperature changes is empirically investigated using Paju weather data. The results reveal that as the temperature gets lower and changes in current temperature are relatively small, the severity of traffic accidents become higher. In addition, the same is true when the difference between current temperature and the dew point temperature is relatively small, as it increases possibilities of road surface freezing. Future studies must investigate how current temperature and the dew point temperature affect road surface freezing and thereby establish a time-space scope to estimate possible road surface freezing sections using only weather and road material type data. This would provide invaluable information for predicting and preventing frozen road accidents based on weather patterns.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.234-237
• /
• 2007

Road networks are important geospatial databases for various GIS (Geographic Information System) applications. Road digital maps may contain geometric spatial errors due to human and scanning errors, but manually updating roads information is time consuming. In this paper, we developed a new road features updating methodology using from multispectral high-resolution satellite image and pre-existing vector map. The approach is based on initial seed point generation using line segment matching and a modified double snake algorithm. Firstly, we conducted line segment matching between the road vector data and the edges of image obtained by Canny operator. Then, the translated road data was used to initialize the seed points of the double snake model in order to refine the updating of road features. The double snake algorithm is composed of two open snake models which are evolving jointly to keep a parallel between them. In the proposed algorithm, a new energy term was added which behaved as a constraint. It forced the snake nodes not to be out of potential road pixels in multispectral image. The experiment was accomplished using a QuickBird pan-sharpened multispectral image and 1:5,000 digital road maps of Daejeon. We showed the feasibility of the approach by presenting results in this urban area.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.23-31
• /
• 2016

PURPOSES : This study aimed to offer a greenhouse gases table to assist a road designer in calculating the greenhouse gases for a road environment when making a decision about an alternative road. METHODS : This study developed an operation mode table of greenhouse gases using the MOVES program. Similar factors for Korean vehicles and fuels are reflected in the MOVES program, which was made in the USA. Finally, a paired t-test was conducted to calculate the site data and MOVES data. Through these studies, a methodology was suggested for calculating carbon emissions based on various types of roads alignments. RESULTS : The site results for a passenger truck on the road were statistically significant when the vehicle speed was above 65 km/h. However, a future study will consider factors for various road alignments and vehicles. CONCLUSIONS : This study will contribute to the theoretical basis for reducing carbon emissions from roads by helping road designers make decisions about road alternatives in terms of the road environment.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2004년도 추계 학술대회 논문집
• /
• pp.65-70
• /
• 2004

This study is to improve location Precision of forest road map which is base of forest road management. The forest road map is constructed using satellite imagery data and GPS route survey, and compared with existing FGIS digital forest road map. And we proposed application of LiDAR data for extracting forest roads.

• 한국환경복원기술학회지
• /
• 제9권3호
• /
• pp.51-58
• /
• 2006

The purpose of this research presents a method to position and makes the structure for eco-corridors reasonably with collectable analysing results of various effects shown in mammals' road-kill at 429 points. Target animals of this research are Leopard cat, Siberian weasel, Raccoon dog, Korean hare, Eurasian red squirrel, Siberian chipmunk and Water deer. The results derived from the empirical analysis on the contents above are followed. First, according to the results as for Leopard cat road kill analysis, which is designated as Endangered Species Class II, the eco-corridor might be located at near village having stead food in order to decrease the frequencies of road-kill, because its road kill points were mainly collected at 4 lane hilly road with mountain-road-farm area geological type of. Second, because Siberian weasel's road kill was detected at 2 lane hilly road with mountain-road-stream geological type, the eco-corridor might be located at near a mill to decrease road-kill frequencies. Third, the road-kill frequency of Eurasian red squirrel can be reduced when the eco-corridor is located at the area across coniferous tree near 4 lane west sea freeway with mountain-road-mountain. Fourth, the road-kill of Raccoon dog can be reduced when the eco-corridor is located at 4 lane mountain road or hilly road with the geological type having farm land-road-mountain(stream). Fifth, Korean hare's road-kill can be reduced when the eco-corridor is located at grass land across ridge line of mountain, because wild rabbit road kill was happened at 4 lane mountain road or 2 lane mountain road(mountain-road-mountain). Sixth, As for Siberian chipmunk, the eco-corridor might be located at the side slope of mountain road at 2 lane mountain road under the speed of 60km/h with mountain-road-mountain. Seventh, For Water deer, the eco-corridor might be located at 4 lane hilly road with mountain-road-farm land. As for Common otter, Amur hedgehog, Yellow-throated marten, Weasel, it is difficult to specify the proper site of eco-corridor due to the lack of data. Eco-corridors for carnivores might be well located at 4 lane hilly road or 2 lane hilly road with mountain-road-farm land, and the track for herbivores might be well located as a overhead bridge on mountain-road-mountain type across mountains. In order to position eco-corridors for wildlife properly, we have to research animal's behavior with ecological background, and to consider the local uniqueness and regularly collect the empirical road-kill data in long term 3 to 5 year, which can be the foundation for the more suitable place of wild life eco-corridors.

• 한국도로학회논문집
• /
• 제18권3호
• /
• pp.115-125
• /
• 2016

PURPOSES : This study proposes a methodology to collect data necessary for microlevel emission estimation, such as second-by-second speeds and road grades, and to accordingly estimate emissions. METHODS : To ease data collection for microlevel emission estimation, a vehicle equipped with speed- and location-recording instruments as well as equipment for measuring road geometry was used. As a case study, this vehicle and the proposed methodology were used on a 10-km-long highway in Yongin City, Korea. Emissions from the vehicle during driving were estimated in various microscale driving conditions. RESULTS : Differences in the estimated emission under different microscale driving conditions cannot be ignored. Compared with the estimations obtained when second-by-second data were not considered, CO and NOx emissions were more than threefold higher when considering second-by-second speed; similarly, CO and NOx emission estimations were higher by approximately 10% and 3%, respectively, when considering second-by-second road grade. CONCLUSIONS : The proposed method can estimate vehicle emissions under real-world driving conditions in such applications as road design and traffic policy assessments.